R&S®AREG800A Automotive radar echo generator

R&S®AREG800A Automotive radar echo generator
Open Lightbox
R&S®AREG800A Automotive radar echo generator
Open Lightbox
R&S®AREG800A Automotive radar echo generator
Open Lightbox
R&S®AREG800A Automotive radar echo generator
Open Lightbox
R&S®AREG800A Automotive radar echo generator
Open Lightbox
R&S®AREG800A automotive radar echo generator, application image R&S®AREG800A automotive radar echo generator, application image R&S®AREG800A automotive radar echo generator, application image R&S®AREG800A automotive radar echo generator, front view R&S®AREG800A automotive radar echo generator, back view

Key facts

  • Generates multiple dynamic artificial objects with individual distance, object size, radial velocity and angular direction for advanced testing in all automotive radar bands
  • Future proof with instantaneous bandwidths of up to 5 GHz and generation of dynamic objects with minimum distances down to air gap values
  • Built-in HiL processor and interface for synchronizing multiple R&S®AREG800A instruments can generate large scenarios
  • Optimized AREG-P configurations for automotive radar EoL production testing and calibration
  • Ready for testing integrated sensing and communications (ISAC) in sub-6 GHz and FR2 bands 

Accelerate automotive radar testing with the most advanced solution available

The R&S®AREG800A automotive radar echo generator is an innovative and versatile automotive radar sensor testing solution. The flexible and scalable concept of the R&S®AREG800A and full harmonization with the R&S®QAT100 advanced antenna array meet the test requirements for the most advanced radar echo generation applications on the market. The R&S®AREG800A

  • Is ideal for testing high-resolution short-range radar sensors in emergency breaking systems
  • Is fully harmonized with the innovative R&S®QAT100 advanced antenna array frontend for scenario generation
  • Is designed for scenario generation and functional safety testing of radar based ADAS/AD and autonomous driving
  • Is versatile. Can cover all applications from pre-development to validation and mass production
In addition to classic automotive safety applications, the R&S®AREG800A forms the core of a versatile test solution that supports the research and development of integrated sensing and communications (ISAC). ISAC is a pillar of 6G and combines two different yet similar worlds - communications and environmental sensing.

Features & benefits

Discover the most advanced automotive radar testing solution available

Future proof your test setup. The R&S®AREG800A enables state-of-the-art test setups with up to 4 GHz instantaneous bandwidth, small artificial object distances and the ability to generate a large number of dynamic artificial objects simultaneously:

  • Fully harmonized with the R&S®QAT100 advanced antenna array for advanced ADAS testing and scenario generation
  • Supports classic mmW frontends for basic benchtop and validation testing  (together with the ATS1500C shielded chamber)
  • Profit from a future proof instantaneous bandwidths of up to 4 GHz for short range radar testing

Frontends for every test case
Open Lightbox

Frontends for every test case

The RF frontend portfolio in the R&S®AREG800A can be tailored to your testing needs.

Flexibility at its best

A tailored R&S®AREG800A configuration is suitable for any demanding automotive radar echo generation application, covering everything from early radar sensor R&D to advanced full vehicle ADAS/AD testing:

  • Simulating dynamic artificial object distance scenarios in early R&D with the R&S®ATS1500C, chipset development and radar sensor validation
  • Hardware-in-the-loop (HiL) testing for ADAS/AD features and algorithm development
  • Vehicle-in-the-loop testing (ViL) on a roller dyno for vehicle certification and homologation
  • State-of-the-art 4D radar sensor production with extreme demands on test equipment

The perfect combination for 4D imaging radar development – the R&S®AREG800A and R&S®ATS1500C
Open Lightbox

The perfect combination for 4D imaging radar development – the R&S®AREG800A and R&S®ATS1500C

The R&S®AREG800A and the R&S®ATS1500C antenna measurement chamber can be combined in a harmonized solution for precise validation and calibration of automotive radars under far field conditions

Realistic testing on virtual roads

The R&S®QAT100 advanced antenna array and the R&S®AREG800A automotive radar echo generator can tackle any autonomous driving challenge. For the first time, reliable, reproducible and realistic testing of radar based ADAS/AD features is now possible.

Test like it’s real
Open Lightbox

Test like it’s real

Designed to generate scenarios that test the functional safety of radar based ADAS/AD and autonomous driving solutions.

Bring real roads into the lab

Designed to generate scenarios that test the functional safety of radar based ADAS/AD and autonomous driving solutions. Complex and risky driving scenarios can be virtually generated and tested for ADAS/AD:

  • Standard industrial simulation environments can control the R&S®AREG800A with a responsive and open real-time interface;
  • The R&S®AREG800A is ideal for open and closed loop test cases.

Reduce test kilometers on public roads
Open Lightbox

Reduce test kilometers on public roads

The R&S®AREG800A and R&S®QAT100 can reliably and realistically test full vehicle ViL on test rigs. EURO NCAP test cases can be performed with high test case reproducibility.

Optimize ADAS/AD testing

The R&S®AREG800A enables state-of-the-art test setups that keep on--road testing to a minimum. The instrument provides::

  • Optimized R&D and testing times
  • Shorter time-to-market for new ADAS/AD features
  • Lower development and testing expenses

Test today’s and tomorrow’s automotive radar sensors and radar based ADAS
Open Lightbox

Test today’s and tomorrow’s automotive radar sensors and radar based ADAS

Bringing the future to life - ISAC

At first communications and automotive radar seem to come from different worlds, but look closer and you will see that these two technologies share a common basis, forming a solid foundation for the implementation and adoption of integrated sensing and communications (ISAC). The R&S®AREG800A is an award winning, reliable and repeatable test solution with:

  • Sub-6 GHz and FR2 (24-44 GHz with R&S®FE44S) support 
  • Full signal transparency and support for all modulation types
  • The ability to generate artificial objects at distances from several meters to 3 km 
  • The ability to simulate densely populated and realistic city scenarios with up to 32 independent artificial objects 

Ready for red

  • Measure equivalent radiated isotropic power (EIRP) for a sensor in line with applicable standards using a connected R&S®NRP8S(N) power sensor
  • Verify radar sensor resistance to in-band interferers with a connected analog or vector signal generator
  • Measure occupied bandwidth and radar signal quality with a connected signal and spectrum analyzer

Open Lightbox

The R&S®AREG800A together with the R&S®FSW8 signal and spectrum analyzer is ideal for parallel echo generation and radar signal analysis.

Simple and stable operation

Intuitive graphical user interface with touchscreen controls Easy and straight forward test setup configuration Optimized for a minimal footprint Built-in SCPI macro recorder with code generator for easy integration into existing test software

Intuitive GUI
Open Lightbox

Intuitive GUI

Simple human-machine interface for easy and intuitive configuration with graphical user interface and touchscreen control

Specifications
Frontends and general concept
Echo generation type Dynamic artificial object generation
Echo generation concept Hybrid with analog for short object distances <17 m  and digital for larger distances
(Optional: fully digital down to the air gap value for FMCW radar testing)  
Remote Frontends R&S®AREG8-24S/-24D/-81S/-81D Classical mmW remote frontends  
R&S®QAT100 Innovative R&S®QAT100 el. controllable antenna array
With the R&S®FE44S Enabling integrated sensing and communications (ISAC) testing in 24-44GHz FR2 
Max. number of remote frontends per base unit  with R&S®AREG8-24S/-24D/-81S/-81D Up to 4 classical mmW remote frontends 
with R&S®QAT100 Up to 8 with R&S®QAT100
Frequency
RF frequency bands with R&S®AREG8-24S/-24D 24-24.25 GHz
With the R&S®FE44S 24-44 GHz
with R&S®AREG8-81S/-81D 76-81 GHz
with R&S®QAT100 76-81 GHz
Instantaneous bandwidth with R&S®AREG8-B9 1 GHz
with R&S®AREG8-B9 and R&S®AREG8-K527 2 GHz
with R&S®AREG8-B9, R;&S®AREG8-K527 and R&S®AREG8-K528 4 GHz
Artificial objects
Minimum artificial object distance  with R&S®AREG8-B9 < 17 m + air gap
With the R&S®AREG8-B9 and R&S®AREG-B63 < 4 m + air gap
With the R&S®AREG8-B9 and R&S®AREG8-K814 Airgap value
With the R&S®AREG8-B9, R&S®AREG8-B63 and R&S®AREG8-K814 Airgap value
Covered distance range of artificial objects with R&S®AREG8-B9 < 17 m to 3000 m
with R&S®AREG8-B9 and R&S®AREG8-B63 < 4 m to 3000 m
With the R&S®AREG8-B9 and R&S®AREG8-K814 Air gap value to 3000 m
With The R&S®AREG8-B9, R&S®AREG8-B63 and R&S®AREG8-K814 Air gap value to 3000 m
Max number of artificial objects per R&S®AREG800A base unit with R&S®QAT100 Artificial object distance < 4 m to 17 m:
Up to 4 with individual azimuth, distance, RCS, Doppler with AREG8-B63
Up to 8 with individual azimuth, distance, RCS, Doppler with AREG8-K814


Artificial object distance > 17 m:
Up to 8 with individual azimuth, distance, RCS, Doppler
with R&S®AREG8-24S/-24D/-81S/-81D Artificial object distance < 4 m to 17 m:
Up to 4 with individual distance, RCS, Doppler (1 per mmW frontend) with AREG8-B63
Up to 32 with individual distance, RCS, Doppler (8 per mmW frontend) with AREG8-K814
 
Artificial object distance > 17 m:
Up to 32 with individual distance, RCS, Doppler (8 per mmW frontend)
 
With the R&S®FE44S Artificial object distance < 4 m to 17 m:
Up to 4 with individual distance, RCS, Doppler (1 per mmW frontend)
 
 
Artificial object distance > 17 m:
Up to 32 with individual distance, RCS, Doppler (8 per mmW frontend)
Object distance step size < 2,5 cm (nom.)
Object distance accuracy < 5 cm (meas.)
Air gap to device under test Recommendation: air gap should be large enough to match far field condition of radar under test
Radial velocity
Individual radial velocity for each object  Yes
Doppler setting range ±500 km/h standard and possibility optionally extend
Velocity step size 0.001 km/h (meas.)
Level
Dynamic RCS range for all artificial objects together with R&S®AREG8-24S/-24D/-81S/-81D 90 dB
with R&S®QAT100 80 dB
Dynamic RCS range for multiple objects per IF path with R&S®AREG8-24S/-24D/-81S/-81D 60 dB
with R&S®QAT100 -
RCS control step size 0.5 dB
Amplitude flatness R&S®QAT100 standalone < ± 5 dB in 4 GHz bandwidth (meas.)
Maximum RX power at frontend with R&S®QAT100 0 dBm @ 77 GHz (nom.)
Recommended RX power at frontend with R&S®QAT100 -20 dBm @ 77 GHz (nom.)
Minimum RX power at frontend with R&S®QAT100 -60 dBm @ 77 GHz (nom.)
Maximum TX power at frontend with R&S®QAT100 0 dBm @ 77 GHz (nom.)
IF input/IF output interface
IF output port with R&S®AREG8-K740 IF outputs on base unit for EIRP and radar signal parameter measurements
IF input port with R&S®AREG8-K741 IF input on base unit for superimposing interferers
Hardware-in-the-loop interface
Dedicated HiL interface with R&S®AREG8-K109 HiL co-processor
HiL interface update rate with R&S®AREG8-K109 down to < 0.03 ms (meas.)
Open-standard protocol support with R&S®AREG8-K109 Open simulation interface (OSI)
User interface and remote controls
Graphical user interface with touch controls Yes
Remote control interfaces Ethernet
with R&S®AREG8-K986 GPIB
Remote control command set SCPI
General parameters
Size 5 HE, 19” width 
Weight depending on options 15 – 26 kg

Available options

Baseband
Product
Description
R&S®AREG8-B9

Order number 1437.8011.02

Description

Digital baseband with 1 GHz bandwidth, 1 IF path and 1 individual object 

R&S®AREG8-B63

Order number 1437.8205.02

Description

Analog stepped delay line for short object generation with 1 IF path and 1 indivdual object 

Bandwidth upgrade
Product
Description
R&S®AREG8-K527

Order number 1437.9882.02

Description

Baseband extension from 1 GHz to 2 GHz bandwidth for 1 IF path

R&S®AREG8-K528

Order number 1437.9799.02

Description

Baseband extension from 2 GHz to 5 GHz bandwidth for 1 IF path 

Baseband enhancements
Product
Description
R&S®AREG8-K570

Order number 1437.9899.02

Description

Activation of second IF path for one baseband with 1 GHz bandwidth and 1 individual object

R&S®AREG8-K812

Order number 1437.9853.02

Description

One additional artifical object for all installed IF paths

R&S®AREG8-K813

Order number 1437.9901.02

Description

Extended Doppler frequency shift up to 10 MHz offset 

R&S®AREG8-K814

Order number 1437.9776.02

Description

Digital ultra short object range down to air-gap value for FMCW radars

Intermediate frequency ports and control interfaces
Product
Description
R&S®AREG8-K986

Order number 1437.9818.02

Description

Remote control GPIB

R&S®AREG8-K740

Order number 1437.9830.02

Description

Analog IF output interfaces

R&S®AREG8-K741

Order number 1437.9847.02

Description

Analog IF input interfaces

R&S®AREG8-K109

Order number 1437.9860.02

Description

Hardware-in-the-Loop control interface

R&S®AREG8-K549

Order number 1437.9876.02

Description

Synchronization interface for multiple AREG800As

R&S®AREG8-K553

Order number 1437.9782.02

Description

Interface for FE44S support - ISAC 

General
Product
Description
R&S®AREG8-24S

Order number 1437.8611.02

Description

Single Antenna Frontend 24 GHz to 24.25 GHz

R&S®AREG8-24D

Order number 1437.8640.02

Description

Dual Antenna Frontend 24 GHz to 24.25 GHz 

R&S®AREG8-81S

Order number 1437.8734.02

Description

Single Antenna Frontend 76 GHz to 81 GHz

R&S®AREG8-81D

Order number 1437.8763.02

Description

Dual Antenna Frontend 76 GHz to 81 GHz 

Description

Advanced antenna array

Description

General accessories
Product
Description
R&S®ZN-ZTW

Order number 1328.8534.19

Description

Torque Wrench, 0.9 Nm

R&S®WCA12-135

Order number 1700.3977.02

Description

Waveguide Coax Adapter WR12 to 1.35mm (f)

Waveguide Coax Adapter WR12 to 1.35 mm female with S-Parameter characterisation, WG stabilzation bracket for USB and LAN NRP power sensors 60 - 90 GHz 

Related videos

Explainer video: Implementing realistic tests on virtual roads

The R&S®QAT100 antenna array and R&S®AREG800A radar echo generator together make the most powerful and scalable automotive radar object simulation system available. Watch this video to see how its advanced features can cover all scenarios from single static objects to complex moving traffic scenarios.

10-Oct-2023

Application video: Accelerating ADAS-AD with Hardware-in-the-Loop Testing

02-Mar-2022

High-Precision In-Band Radar Test Solution

Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022.

01-Mar-2022

High-Precision In-Band Radar Test Solution

Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022.

01-Mar-2022

CES: Automotive Radar Object Simulation for Validation

Check out R&S Automotive Radar Object Simulation solutions for validations, live from the show floor at CES 2022.

31-Jan-2022

CES: Automotive Radar Object Simulation for Validation

Check out R&S Automotive Radar Object Simulation solutions for validations, live from the show floor at CES 2022.

31-Jan-2022

Application video: Automotive radar object simulation with the AREG800A and QAT100

Watch the output of our radar test system in different use cases. This video shows the RTS in stand-alone operation, remote control and a basic HiL setup.

23-Dec-2021

Application video: Automotive radar object simulation with the AREG800A and QAT100

Watch the output of our radar test system in different use cases. This video shows the RTS in stand-alone operation, remote control and a basic HiL setup.

23-Dec-2021

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.