Brochures and Data Sheets for R&S®ZVA

Login Password for ZVA ZVA, ZVL, FSL, Login Password for ZVA Login Password for ZVA ZVA, ZVL, FSL, Login Password for ZVA

This document provides the technical specifications of the R&S®ZVA vector network analyzer.

Connection of an external Monitor to ZVA FAQ - Connection of an external Monitor to ZVA Connection of an external Monitor to ZVA Connection of an external Monitor to ZVA FAQ - Connection of an external Monitor to ZVA Connection of an external Monitor to ZVA

ZNA/ZVA - Mounting of the converters ZCxxx ZNA, ZVA, Converter ZCxxx ZNA/ZVA - Mounting of the converters ZCxxx ZNA/ZVA - Mounting of the converters ZCxxx ZNA, ZVA, Converter ZCxxx ZNA/ZVA - Mounting of the converters ZCxxx

The R&S®ZVA series is the high-end class of the Rohde & Schwarz network analyzers. It combines operating ease and high measurement speed, uniformly implemented in the R&S®ZVA, R&S®ZVB and R&S®ZVT, with exceptional RF characteristics, a wide scope of functions and high flexibility.

English (PD 5214.2033.12)

The R&S®ZVA110 is a 1.0 mm vector network analyzer system, covering the frequency range from 10 MHz to 110 GHz.

ZNA / ZVA / ZNB - no correction data for Sliding matches? ZNA, ZVA, ZNB, Sliding match I got a calibration kit with a sliding match standard. But there are no correction values for the NWA supplied. ZNA / ZVA / ZNB - no correction data for Sliding matches? ZNA, ZVA, ZNB, Sliding match I got a calibration kit with a sliding match standard. But there are no correction values for the NWA supplied.

ZVA - One Path two Port Calibration with Port 3 and 4 FAQ, ZVA ZVA - One Path two Port Calibration with Port 3 and 4 ZVA - One Path two Port Calibration with Port 3 and 4 FAQ, ZVA ZVA - One Path two Port Calibration with Port 3 and 4

This document provides the technical specifications of the R&S®ZCxxx millimeterwave converters.

This document provides the technical specifications of the R&S®ZN-Z129, R&S®ZN-Z129E, R&S®ZN-Z135 and R&S®ZN-Z170 calibration kits.

English (PD 3606.8843.22)

Active electronically scanned array and antenna testing

English (PD 5214.3346.22)

English (PD 3607.0575.22)

The Rohde & Schwarz Health Guide for vector network analyzers gives advice to prevent electrical and mechanical damage.

English (PD 0758.2554.22)

AESA and antenna testing

This document provides the technical specifications of the RPG ZRXxxx millimeterwave receiver.

English (PD 5214.1950.22)

English (PD 3607.0569.22)

English (PD 5214.6516.22)

English (PD 5214.1950.12)

Hybrid load pull and behavioral modeling with R&S®ZNA and R&S®ZVA;
Wideband noise parameter extraction with the R&S®ZNA;
Pulsed IV and compact modeling with the R&S®ZNA and R&S®ZNB

English (PD 5213.8109.22)

English (PD 5214.0476.22)

English (PD 5214.2291.22)

Retain your current test system software, benefit from Rohde & Schwarz experience in code emulation and rely on Rohde & Schwarz long-term support.

Slide left Slide right

R&S®LegacyPro - Instrument emulation – breathing new life into existing test systems - Brochure

R&S®LegacyPro - Instrument emulation – breathing new life into existing test systems - Brochure JA

This document provides the technical specifications of the R&S®ZN-ZM292 calibration mixer.

What is the correct pin layout of the DC inputs on the network analyzer's rear panel? ZVA, ZVB, ZVT, What is the correct pin layout of the DC inputs on the network analyzer's rear panel? What is the correct pin layout of the DC inputs on the network analyzer's rear panel? ZVA, ZVB, ZVT, What is the correct pin layout of the DC inputs on the network analyzer's rear panel?

All four S-parameter remote set up ZVA,ZVB All four S-parameter remote set up All four S-parameter remote set up ZVA,ZVB All four S-parameter remote set up

Cannot use internal display and external monitor together at the same time. ZVB, ZVA, ZVT, Cannot use internal display and external monitor together at the same time. Cannot use internal display and external monitor together at the same time. ZVB, ZVA, ZVT, Cannot use internal display and external monitor together at the same time.

German keyboard driver ZVA, ZVB, German keyboard driver German keyboard driver ZVA, ZVB, German keyboard driver

Calibration with Auto Cal Kits and inserted attenuators ZVA, ZVB, ZVT, Calibration with Auto Cal Kits and inserted attenuators Calibration with Auto Cal Kits and inserted attenuators ZVA, ZVB, ZVT, Calibration with Auto Cal Kits and inserted attenuators

How to use the User Def. Math functionality ZVA, ZVB, ZVT, How to use the User Def. Math functionality How to use the User Def. Math functionality ZVA, ZVB, ZVT, How to use the User Def. Math functionality

Change the byte order in FORMAT REAL ZVA, ZVB, ZVT, Remote Control: Change the byte order in FORMAT REAL Change the byte order in FORMAT REAL ZVA, ZVB, ZVT, Remote Control: Change the byte order in FORMAT REAL

Which settings should I use for the Transform Time Domain mode? ZVL, ZVA, ZVB, ZVT, Which settings should I use for the Transform Time Domain mode? Which settings should I use for the Transform Time Domain mode? ZVL, ZVA, ZVB, ZVT, Which settings should I use for the Transform Time Domain mode?

Connect Generator via LAN ZVA, Connect Generator via LAN Connect Generator via LAN ZVA, Connect Generator via LAN

Calibration of two channels simultaneously with remote commands FAQ, ZVA, ZNA, ZNB, ZND, Multi Channel Calibration Calibration of two channels simultaneously with remote commands Calibration of two channels simultaneously with remote commands FAQ, ZVA, ZNA, ZNB, ZND, Multi Channel Calibration Calibration of two channels simultaneously with remote commands

VNA - do I really need a sliding match for calibration? ZNA, ZNB, ZVA, sliding match, VNA, calibration VNA - do I really need a sliding match for calibration? VNA - do I really need a sliding match for calibration? ZNA, ZNB, ZVA, sliding match, VNA, calibration VNA - do I really need a sliding match for calibration?

4 Port Calibration with a 2 Port automatic calibration kit possible? FAQ, ZVA, ZVB, ZVT 4 Port Calibration with a 2 Port automatic calibration kit possible? 4 Port Calibration with a 2 Port automatic calibration kit possible? FAQ, ZVA, ZVB, ZVT 4 Port Calibration with a 2 Port automatic calibration kit possible?

How can I start a SSST calibration? Application Card, ZVA, ZNB, SSST calibration How can I start a SSST calibration? How can I start a SSST calibration? Application Card, ZVA, ZNB, SSST calibration How can I start a SSST calibration?

Calculate the mixed-mode S-parameter from an S4P file ZVB, ZVA, ZVT, Calculate the mixed-mode S-parameter from an S4P file Calculate the mixed-mode S-parameter from an S4P file ZVB, ZVA, ZVT, Calculate the mixed-mode S-parameter from an S4P file

Mixer measurement: Conversion gain too low ZVA, ZVB, ZVT, Mixer measurement: Conversion gain too low Mixer measurement: Conversion gain too low ZVA, ZVB, ZVT, Mixer measurement: Conversion gain too low

Control external Generator in Fast Sweep Mode ZVA, Control external Generator in Fast Sweep Mode Control external Generator in Fast Sweep Mode ZVA, Control external Generator in Fast Sweep Mode

Converting the real and imaginary numbers to magnitude in dB and phase in degrees. ZVA, ZVB, ZVT Converting the real and imaginary numbers to magnitude in dB and phase in degrees. Converting the real and imaginary numbers to magnitude in dB and phase in degrees. ZVA, ZVB, ZVT Converting the real and imaginary numbers to magnitude in dB and phase in degrees.

How can I Switch from Remote to Local State via Remote Control? FSV, FSP, FSU, FSQ, ESPI, ESU, ESCI, ZVA, ZVB, ZVT, ZVL, FSL, SMB, SMC, SMJ, VISA, GPIB, LOCAL, How can I switch from remote to local state via remote control? How can I Switch from Remote to Local State via Remote Control? FSV, FSP, FSU, FSQ, ESPI, ESU, ESCI, ZVA, ZVB, ZVT, ZVL, FSL, SMB, SMC, SMJ, VISA, GPIB, LOCAL, How can I switch

Improve the calibration procedure for different setups FAQ: Improve the calibration procedure for different setups Improve the calibration procedure for different setups Improve the calibration procedure for different setups FAQ: Improve the calibration procedure for different setups Improve the calibration procedure for different setups

Remote control via driver: single sweep with average of 10 - *OPC is not working ZVA; ZVB; ZVT; single average sweep, I trigger this single sweep with the RSZVB_Send_Trigger_and_Wait_for_OPC driver, but this driver does not wait for the complete 10 sweeps. If I don't use averaging, this program is works. Remote control via driver: single sweep with average of 10 - *OPC is not working ZVA; ZVB; ZVT;

Sending a Remote Control Ccommand Internally ZVA, ZVB, ZVT, FSQ, FSU, FSUP, FSP, FSL:FSV, ESPI, FSVR, ESCI, FSMR, ESU, ZVL, ESL, IECWIN32, Sending a remote Control Command internally Sending a Remote Control Ccommand Internally ZVA, ZVB, ZVT, FSQ, FSU, FSUP, FSP, FSL:FSV, ESPI, FSVR, ESCI, FSMR, ESU, ZVL, ESL, IECWIN32, Sending a remote Control Command internally

Differential data export ZVA, ZVB, ZVT, Differential data export Differential data export ZVA, ZVB, ZVT, Differential data export

Averaged single sweep ZVA; ZVB; ZVT, single sweep mode, stop after 1 sweep I have set my VNA to single sweep mode and switched on averaging with a factor of 10. But when I restart the single sweep, it stops after 1 sweep and the averaging is not done. Averaged single sweep ZVA; ZVB; ZVT, single sweep mode, stop after 1 sweep I have set my VNA to single sweep mode and switched on averaging with a factor

Calibration Unit and Remote Calibration ZVA,ZVB Calibration Unit and Remote Calibration Calibration Unit and Remote Calibration ZVA,ZVB Calibration Unit and Remote Calibration

Remote control via drivers: How to set the ports in RSZVB_Select_Calibration_Type ZVA; ZVB; ZVT; Use Port 1 and Port 3, Switch off Port 2 and Port 4 I want to use Port 1 and Port 3, so I tried to switch them on by setting the value to 1 (the default value) and to switch off Port 2 and Port 4 by setting the value to 0. But this does not work. How do I set the ports? Remote control via drivers: How to

License Keycode for VNAMUC is not accepted ZVA, ZVT, ZVB, ZNB FAQ License Keycode for VNAMUC is not accepted License Keycode for VNAMUC is not accepted ZVA, ZVT, ZVB, ZNB FAQ License Keycode for VNAMUC is not accepted

Query the data of all traces at once ZNA, ZVA, ZNB, ZND, trace data query Is there a way to query the data of all traces at once? Query the data of all traces at once ZNA, ZVA, ZNB, ZND, trace data query Is there a way to query the data of all traces at once?

How can I change the display resolution when I use an external monitor? ZVA, ZVB, How can I change the display resolution when I use an external monitor? How can I change the display resolution when I use an external monitor? ZVA, ZVB, How can I change the display resolution when I use an external monitor?

Changing the update display rate of a sweep with many sweep points. ZVA, ZVB, ZVT, Changing the update display rate of a sweep with many sweep points. Changing the update display rate of a sweep with many sweep points. ZVA, ZVB, ZVT, Changing the update display rate of a sweep with many sweep points.

Longer sweep times in CW mode ZVA,ZVB,ZVT Longer sweep times in CW mode Longer sweep times in CW mode ZVA,ZVB,ZVT Longer sweep times in CW mode

TRL calibration - middle of line or end of line FAQ, ZVA, ZNB, TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line FAQ, ZVA, ZNB, TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line

How to export Touchstone s2p files? ZVA, ZVB, ZVT, How to export Touchstone s2p files? How to export Touchstone s2p files? ZVA, ZVB, ZVT, How to export Touchstone s2p files?

Most accurate way to measure the length of a cable with a VNA ZVL, ZVA, ZVB, ZVT, Most accurate way to measure the length of a cable with a VNA Most accurate way to measure the length of a cable with a VNA ZVL, ZVA, ZVB, ZVT, Most accurate way to measure the length of a cable with a VNA

Reading the magnitude (dB) and phase (degrees) values directly ZVA, ZVB, ZVT, Reading the magnitude (dB) and phase (degrees) values directly Reading the magnitude (dB) and phase (degrees) values directly ZVA, ZVB, ZVT, Reading the magnitude (dB) and phase (degrees) values directly

What is the function of "Resolve pool link" in the calibration manager? ZVA; ZVT What is the function of "Resolve pool link" in the calibration manager? What is the function of "Resolve pool link" in the calibration manager? ZVA; ZVT What is the function of "Resolve pool link" in the calibration manager?

Loading an S-parameter file from a PC into a memory trace ZVL, ZVA, ZVB, ZVT, Loading an S-parameter file from a PC into a memory trace Loading an S-parameter file from a PC into a memory trace ZVL, ZVA, ZVB, ZVT, Loading an S-parameter file from a PC into a memory trace

Reverse sweep / backward sweep ZVA, ZVT, ZNB Reverse sweep / backward sweep Reverse sweep / backward sweep ZVA, ZVT, ZNB Reverse sweep / backward sweep

Recall of user's own calibration kits and connectors via remote ZVA,ZVB,ZVT,ZVL Recall of user's own calibration kits and connectors via remote Recall of user's own calibration kits and connectors via remote ZVA,ZVB,ZVT,ZVL Recall of user's own calibration kits and connectors via remote

How can I delete Cal Kit Data? FAQ, ZVA, ZVB, ZVT How can I delete Cal Kit Data? How can I delete Cal Kit Data? FAQ, ZVA, ZVB, ZVT How can I delete Cal Kit Data?

Calibrating a vector network analyzer (VNA) with different connectors on each port ZNB; ZVA; ZNC; ZND Calibrating a vector network analyzer (VNA) with different connectors on each port Calibrating a vector network analyzer (VNA) with different connectors on each port ZNB; ZVA; ZNC; ZND Calibrating a vector network analyzer (VNA) with different connectors on each port

How do I calculate the logarithmic frequency steps for the horizontal axis? Calculate logarithmic frequency, horizontal axis, log frequency steps, FSW, FSV, FSVA, ZNA, ZNB, ZNL, ZND, ZVA, FPL How do I calculate these frequency points when I have a logarithmic sweep and know the center frequency, the span and the number of sweep points? How do I calculate the logarithmic frequency steps for the horizontal

Deactivation of Ports with remote commands Deactivation of Ports, ZVA, ZVB, ZVT Deactivation of Ports Deactivation of Ports with remote commands Deactivation of Ports, ZVA, ZVB, ZVT Deactivation of Ports

Source Power Calibration is very slow. ZVA, ZVB, ZVT, Source Power Calibration is very slow. Source Power Calibration is very slow. ZVA, ZVB, ZVT, Source Power Calibration is very slow.

Dividing a trace by two ZVA,ZVB,ZVT Dividing a trace by two Dividing a trace by two ZVA,ZVB,ZVT Dividing a trace by two

How to bisect the result in dB with Trace Mathematics ZVA, ZVB, ZVT, How to bisect the result in dB with Trace Mathematics How to bisect the result in dB with Trace Mathematics ZVA, ZVB, ZVT, How to bisect the result in dB with Trace Mathematics

Restore the Auto Logon Configuration FSPx, FSQx, FSUx, ZVBx, ZVAx, ZVTx, ESPIx, ESCI, WINXP, Restore the Auto Logon Configuration Restore the Auto Logon Configuration FSPx, FSQx, FSUx, ZVBx, ZVAx, ZVTx, ESPIx, ESCI, WINXP, Restore the Auto Logon Configuration

Query of the x-values (frequency) of a trace Query of x-values, (frequency) of a trace, ZVA, ZVB, ZNA, ZNB, ZND I query the values of a trace using scpi commands. But I get the y-values only. Is there a possibility to get the y-values also (frequency)? Query of the x-values (frequency) of a trace Query of x-values, (frequency) of a trace, ZVA, ZVB, ZNA, ZNB, ZND I query the values of a trace using