75 Results
28-Mar-2024
Rohde & Schwarz first to show measurements on novel Bluetooth® Channel Sounding signals for positioning accuracyRohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
To ensure connectivity and trouble-free operation, each Bluetooth® enabled device has to be tested for conformance with Bluetooth SIG standards and regulatory requirements.
23-Nov-2017
Rohde & Schwarz Operating Manual for the Bluetooth®Enhanced Data Rate and Bluetooth®5.0 application of the signal generator; option R&S®SMBV-K60, SMBV-K117
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
Rohde & Schwarz User Manual for the Bluetooth® application of the signal generator R&S®SMW200A; options R&S®SMW-K60, R&S®SMW-K117, R&S®SMW-K178.
Rohde & Schwarz User Manual for the Bluetooth®EDR application of the signal generator R&S®SMM100A; options R&S®SMM-K60, R&S®SMM-K117, R&S®SMM-K178.
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
Rohde & Schwarz user manual for the Bluetooth®EDR application of the R&S®SMBV100B; options R&S®SMBVB-K60, R&S®SMBVB-K117.
Bluetooth Transmitter Measurements without Connection Setup
04-Feb-2003 | AN-No. 1MA49
In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment. In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment.
Setting a CMW as a Bluetooth LE packet Generator
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans.
Measurements on Bluetooth Devices using R&S CMU200 and CMUgo
06-Oct-2006 | AN-No. 1CM50
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
Generating Bluetooth RF Test Signals with SMIQ Signal Generator
30-Jan-2001 | AN-No. 1MA31
23-May-2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.
The R&S CMW platform covers all test cases defined by Bluetooth SIG. The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.
Analyze correlations between WLAN and Bluetooth
Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.
17-May-2018
R&S®FSV-K8 Bluetooth Measurements Operating Manual