Isolated probing system For oscilloscopes

The next ground breaking probe solution

Isolated probing system For oscilloscopes
Lightbox öffnen
Isolated probing system For oscilloscopes
Lightbox öffnen
Isolated probing system For oscilloscopes
Lightbox öffnen
Isolated probing system For oscilloscopes
Lightbox öffnen
R&S®isolated probe system for oscilloscope, application Image R&S®isolated probe system for oscilloscope, application Image R&S®isolated probe system for oscilloscope, front high R&S®isolated probe system for oscilloscope, back high

Hauptmerkmale

  • 100, 200, 350, 500 MHz and 1 GHz bandwidth, upgradeable
  • > 90 dB CMRR at 1 GHz
  • ± 3000 V differential input range and offset
  • ± 60 kV common mode range
  • Dual connectivity with a Rohde & Schwarz probe interface and SMA connector

NEXT GENERATION GROUND BREAKING SOLUTION

With optical isolation

The R&S®RT-ZISO isolated probing system can tackle the challenge of measuring in high voltage and fast switching environments. The power-over-fiberoptic architecture galvanically isolates the device under test (DUT)for the highest possible common mode rejection ratio (CMRR) at up to 1 GHz. The complete systems compensate thermal drifts and gain-errors for the highest possible uncompromising signal fidelity .

Merkmale & Vorteile

For fast common mode probing challenges

The R&S®RT-ZISO isolated probing system suppresses interference from fast common mode signals with optical isolation for a CMRR of > 90 dB at 1 GHz. This helps with high-side gate measurements on complementary switching circuits especially wide bandgap devices.

  • 1 GHz > 90 dB
  • 500 MHz > 100 dB
  • 100 MHz > 115 dB
  • 1 MHz > 145 dB

Lightbox öffnen

Isolation limit CM noise loop formation in the system.

Probe tips matter

The R&S®RT-ZISO comes in a variety of probe tips and the MMCX probe tip is the most important one for CMRR performance. Different connector types such as square pins and wide square pins are also supported with different attenuation ratios. The probe tip cables are long and formable for allow easy access to aa probe point with minimal mechanical stress.

Lightbox öffnen

Formable probe tips with different connectors and browser probe.

Hassle-free setup with Rohde & Schwarz oscilloscopes

Using the R&S®RT-ZISO with the Rohde & Schwarz probe interface on our oscilloscopes creates a seamless experience. The instrument detects and sets up the probe tip information. Offset and range control can be easily configured on the instrument. Users can also easily use all Rohde & Schwarz oscilloscope functions and features such as fast acquisition and responsive FFT in their measurements.

Lightbox öffnen

Seamless connection for control with a Rohde & Schwarz oscilloscope

Investment protection

When using R&S®RT-ZISO isolated probe systems, users can connect to any oscilloscope with a BNC or SMA interface. Investment in instruments can be based on performance needs. R&S®RT-ZISO lets bandwidth be upgraded based on future needs. 

Lightbox öffnen

Future bandwidth upgrade possible with the R&S®RT-ZISO

Safely measure, securely operate

The R&S®RT-ZISO complies with CAT III 1000V safety ratings. The material and mechanical structures comply with IEC/EN 61010-31 covering hand-held probe assemblies for electrical measurements. 

  • CAT III 1000V safety rating
  • Safe attach on probe tips
  • Class 1 laser safety

Lightbox öffnen

Safe attach lets you safely swap out probe tips

Verfügbare Optionen

Probe tips
Produkt
Beschreibung
R&S®ZISO-Z101

Bestellnummer 1803.4100.02

Beschreibung

MMCX probe tip with 1.5x, 8 Vrms, ±45 Vpk , 50 Ω, 1000 V CAT III

Tip length with 36 cm (14 inch)

R&S®ZISO-Z201

Bestellnummer 1803.4200.02

Beschreibung

R&S®MMCX probe tip with 10x, 300 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 21 cm (8 inch)

R&S®ZISO-Z202

Bestellnummer 1803.4300.02

Beschreibung

Square pin probe tip with 25x, 750 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 32 cm (12 inch)

R&S®ZISO-Z203

Bestellnummer 1803.4400.02

Beschreibung

Wide square pin probe tip with 100x, 3000 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 38 cm (15 inch)

R&S®ZISO-Z301

Bestellnummer 1803.4500.02

Beschreibung

Isolated browser tip with 10x, 300 Vpk, 10 MΩ, 300 V CAT III

Tip length with 120 cm (47 inch)

R&S®ZISO-Z302

Bestellnummer 1803.4600.02

Beschreibung

Isolated browser tip with 100x, 3000 Vpk, 100 MΩ, 1000 V CAT III

Tip length with 120 cm (47 inch)

Cables
Produkt
Beschreibung
R&S®ZISO-B403

Bestellnummer 1804.5017.02

Beschreibung

3 meter (10 foot) optical fiber cable 

installed and calibrated with base unit when ship

R&S®ZISO-B410

Bestellnummer 1804.5023.02

Beschreibung

10 meter optical fiber cable (33 feet)

installed and calibrated with base unit when shipped

Bandwidth options
Produkt
Beschreibung
R&S®ZISO-B901

Bestellnummer 1804.5030.02

Beschreibung

100 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B902

Bestellnummer 1804.5046.02

Beschreibung

200 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B903

Bestellnummer 1804.5052.02

Beschreibung

350 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B905

Bestellnummer 1804.5069.02

Beschreibung

500 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B910

Bestellnummer 1804.5075.02

Beschreibung

1 GHz bandwidth option

installed and calibrated with base unit when shipped

Informationen anfordern

Haben Sie Fragen oder benötigen Sie weitere Informationen? Nutzen Sie hierzu einfach unser Kontaktformular und wir setzen uns umgehend mit Ihnen in Verbindung.

Marketing-Einverständniserklärung

Ihre Anfrage wurde erfolgreich versendet. Wir nehmen in Kürze Kontakt mit Ihnen auf.
An error is occurred, please try it again later.
Allgemeine Informationen und rechtliche Hinweise

Unverbindliche Preisempfehlung des Herstellers (UVP). Der dargestellte Preis versteht sich ohne USt. Preise und Angebote richten sich nur an Unternehmer und nicht an private Verbraucher.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Teilnahmebedingungen für das Gewinnspiel „10 Jahre Oszilloskope von Rohde & Schwarz“

1. Das Gewinnspiel „10 Jahre Oszilloskope von Rohde & Schwarz“ (nachfolgend „Gewinnspiel“ genannt) wird organisiert von der Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 München, Deutschland, Tel. +49 89 41 29 0 (nachfolgend „R&S“ genannt).

2. Teilnehmer können sich zwischen dem 1. Januar 2020 und dem 31. Dezember 2020 mit ihrem Namen, Firmennamen und ihrer geschäftlichen E-Mailadresse registrieren.

3. Die Teilnahme am Gewinnspiel ist kostenlos und nicht vom Erwerb einer Ware oder Dienstleistung abhängig.

4. Teilnahme- und gewinnberechtigt sind nur juristische Personen. Natürlichen Personen ist es nicht gestattet, in ihrem eigenen Namen und auf eigene Rechnung teilzunehmen. Sie dürfen das Teilnahmeformular lediglich in ihrer Eigenschaft als Vertreter einer juristischen Person und im Namen und Auftrag dieser juristischen Person einreichen.

5. Zu gewinnen gibt es innerhalb des Zeitraums vom 1. Januar 2020 bis zum 31. Dezember 2020 jeweils eines von zehn R&S®RTB2000 Oszilloskopen:

Preis: 1x R&S®RTB2000 Digitales Oszilloskop

6. Die Preisverlosung findet am Hauptsitz von Rohde & Schwarz, Mühldorfstraße 15, 81671 München, statt. Die Gewinner werden innerhalb von fünf (5) Werktagen per E-Mail benachrichtigt.

7. Der bevollmächtigte Vertreter der juristischen Person hat die Inanspruchnahme des Gewinns gegenüber R&S zu bestätigen. Bleibt diese Inanspruchnahme aus oder erfolgt keine Antwort innerhalb von zwei (2) Wochen, wird ein neuer Gewinner ermittelt. Wenn innerhalb von vier (4) Wochen kein Gewinner feststeht, endet die Verlosung und der Preis verfällt.

8. Mitarbeiter von R&S und an der Konzeption und Umsetzung des Gewinnspiels beteiligte Personen sowie ihre Familienmitglieder sind nicht berechtigt, das Teilnahmeformular auszufüllen.

9. Eine Barauszahlung oder ein Umtausch von Preisen ist ausgeschlossen. Preise sind nicht übertragbar. Alle Steuern, Abgaben, Zölle, Gebühren und sonstigen Entgelte, die im Land des Teilnehmers erhoben werden, sind vom Teilnehmer zu tragen.

10. Personenbezogenen Daten werden ausschließlich für die Durchführung des Gewinnspiels verwendet und innerhalb von vier (4) Wochen nach Ende des Gewinnspiels gelöscht, sofern nichts anderes vereinbart wurde.

11. Ein Verstoß gegen diese Teilnahmebedingungen berechtigt R&S, den jeweiligen Teilnehmer von der Teilnahme auszuschließen. Handelt es sich bei dem ausgeschlossenen Teilnehmer um einen bereits ausgelosten Gewinner, kann der Gewinn nachträglich aberkannt werden. Wird ein Preis aufgrund eines Verstoßes gegen diese Teilnahmebedingungen nachträglich aberkannt, ist er von dem jeweiligen Teilnehmer auf dessen Kosten an die oben unter Punkt 1 angegebene Anschrift von R&S zurückzusenden, und es wird ein neuer Gewinner ermittelt.

12. Teilnehmer haben keinen Gewinnanspruch. Der Rechtsweg ist ausgeschlossen.

13. Das Gewinnspiel und jedes daraus zwischen R&S und dem jeweiligen Teilnehmer entstehende Vertragsverhältnis unterliegt deutschem Recht und gilt unter Ausschluss kollisionsrechtlicher Regelungen. Für alle Streitigkeiten, die sich mittelbar oder unmittelbar aus der Teilnahme an diesem Gewinnspiel ergeben, wird München als ausschließlicher Gerichtsstand vereinbart.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.