767 Results
Generating and Analyzing CDMA2000 Signals
27-Mar-2001 | AN-No. 1MA34
Test of DVB-H Capable Mobile Phones in Development and Production
07-Apr-2005 | AN-No. 1MA91
Deployment of LabVIEW Drivers for the R&S CompactTSVP
28-Dec-2007 | AN-No. 1SP805
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
Channel Sounding in White Space Spectrum
13-Jul-2011 | AN-No. 1MA199
High Speed Downlink Packet Access (HSDPA) Test and Measurement Requirements
01-Feb-2005 | AN-No. 1MA82
UTRA-FDD Receiver Tests Under Fading Conditions with CMU and ABFS
25-Jun-2008 | AN-No. 1MA54
Measuring Bit Error Rate using the R&S SFU-K60 Option
19-Dec-2006 | AN-No. 7BM51
Measuring Balanced Components with Vector Network Analyzer ZVB
20-Sep-2004 | AN-No. 1EZ53
This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality.
09-Apr-2015 | AN-No. 1CM103
This application note explains how to set up a vector signal generator for LTE FDD repeater conformance testing accordingg to various test cases defined in the 3GPP Technical Specification 36.143.
26-Apr-2013 | AN-No. 1GP85
Tests of Audio Amplifiers in Accordance with Standard IEC 60268-3
13-Feb-2008 | AN-No. RCS0704-0032
Measuring Electro Magnetic Disturbance During ISO/IEC 14443 Chipcard Data Transmission
19-Oct-2007 | AN-No. 1MA120
CDMA2000<sup>®</sup> 1xEV-DO Packet Data Testing with R&S<sup>®</sup> CMU200
04-May-2007 | AN-No. 1CM64
WiMAX: IEEE 802.16e-2005 Introduction to OFDMA Measurements
23-May-2007 | AN-No. 1EF58
Calibration Tool for PESQ Speech Quality Tests
30-Jun-2011 | AN-No. 1GA50
Measurement of WLAN 802.11 ac signals
22-Sep-2011 | AN-No. 1EF82
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
04-May-2023 | AN-No. 1SL396
What is a decibel and how should we use it in our calculations? This Application Note is intended as a refresher on the subject of decibels.
21-Apr-2015 | AN-No. 1MA98
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
This application note demonstrates the use of the FSMR, including the Cross-correlation option (R&S®FSMR3-B60), to measure the Phase Noise characteristics of a raw Signal Generator (R&®SMA100B).
31-Dec-2021 | AN-No. 1SL376
Comprehensive test solutions guide for production and R&D
Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.
19-Jun-2023 | AN-No. 1SL395
Reliable small cell planning using LTE test transmitter
09-Feb-2017 | AN-No. 1MA297
Collection of Setups for Measurements with Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA36
Lip-Sync Measurement (AV Delay) for TV Displays
21-Apr-2010 | AN-No. 7BM77
The analog demodulation measurement application R&S®FSxx-K7 performs frequency and phase settling time measurements using a modern wideband concept..
18-Jun-2022 | AN-No. 1EF112
SMIQ as Fading Simulator for External Signals
09-Mar-1998 | AN-No. 1MA07
Generation of Vector Signals at Microwave Frequencies
28-Jul-2009 | AN-No. 1GP76
Controlling External Generators and Power Meters with Network Analyzer ZVR
19-Oct-1998 | AN-No. 1EZ46