767 Results
Phase-Synchronized Signal Generation with two R&S<sup>®</sup> AM300
27-Jun-2007 | AN-No. RAC-0705-0038
Measurements on Bluetooth Devices using R&S CMU200 and CMUgo
06-Oct-2006 | AN-No. 1CM50
GSM Measurements with the R&S CMU200 and CMUgo
24-May-2005 | AN-No. 1CM57
Automatic DAB Receiver Test - Test of Re-Synchronisation Capability
11-Nov-2005 | AN-No. FTK04
This application note reviews the fundamentals of residual or additive noise and addresses measurement techniques for determining the amplitude (AM) and phase noise added by two-port devices such as: amplifiers, mixers, block frequency converters, multipliers, dividers, and frequency synthesizers.
09-Oct-2017 | AN-No. 1EF100
Simulating realtime fading with R&S® vector signal generators made easy with a multitude of standard-compliant, preconfigured fading scenarios. This application note gives a brief introduction to fading and explains how to use the channel simulators in custom applications.
26-Apr-2013 | AN-No. 1GP99
SNMP Example: DVM Management Center Monitoring in a Broadcast Network
31-May-2007 | AN-No. 7BM66
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).
03-Nov-2015 | AN-No. 1MA194
This application note discusses WLAN standard IEEE 802.11n. It first describes the most important amendments to previous releases and the ambitious new measurement tasks.
26-Apr-2013 | AN-No. 1MA179
This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.
14-May-2013 | AN-No. 7BM83
This Application Note describes basic operating principles of distance measurement equipment (DME) and tactical air navigation (TACAN).
28-Mar-2017 | AN-No. 1EF91
Application Note Peak and Mean Power measurements on wideband FMCW radar signals
28-Jun-2019 | AN-No. 1EF107
This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND.
19-Sep-2022 | AN-No. 1SL367
This application note explains how to test your remote radio head with Rohde & Schwarz test and measurement equipment.
05-Aug-2013 | AN-No. 1GP78
Getting started with IQ Streaming Application
The intention of this Application Note is to provide an overview of all necessary tasks for getting along with successful IQ Streaming.The necessary technical requirements are described as well as the streaming parameters of the IQ data stream.The general operation and basic setup of the MSR4 is described in the user manual and is not part of this document.
28-Mar-2023 | AN-No. 1179.7104.02
Measuring Color-Reproduction Quality on TVs and Monitors
13-Aug-2010 | AN-No. 7BM78
DFS Analysis Tool, Dynamic Frequency Selection in the 5 GHz Band
30-Mar-2007 | AN-No. 1EF59
This application note highlights various aeronautical radio navigation signals such as VHF omnidirectional radio range (VOR), instrument landing system (ILS) for glide slope (GS) and localizer (LLZ), as well as marker beacon (MB).
20-Apr-1998 | AN-No. 1GPAN02
This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 oscilloscope.
24-Apr-2013 | AN-No. 1EF86
Generation and Analysis of RFID Signals According to ISO 15693
17-May-2006 | AN-No. RSI01
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB 3.2 Legacy Cable Testing for USB Type A, Type B, and Micro family connector types. Based on 5 Gbps and 10 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
09-Nov-2023 | AN-No. 1SL408
(E)GPRS Measurements with R&S CMU200 and CMUgo
07-Sep-2004 | AN-No. 1CM52
EDGE Timeslot Errors Measurements with FSIQ
22-Jan-2011 | AN-No. 1ES48
Seamless Level Setting on the R&S SFU
23-Jun-2006 | AN-No. 7BM54
Generating the Noise Field for Ambient Noise Rejection Tests
12-Oct-2010 | AN-No. 1GA51
This application note describes different measurement techniques and methods for an automotive lighting module based on a hybrid controller design.
08-Jun-2020 | AN-No. GFM339
This application note describes the test procedures and provides save-recall files and interferer signals for the Broadcast Test Center R&S®BTC.
11-Jul-2017 | AN-No. 1GP116
This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types.
09-Apr-2015 | AN-No. 1MA99
GSM/GPRS/Edge Receiver Tests Under Fading Conditions with CMU and SMIQ/ABFS
28-Aug-2009 | AN-No. 1MA60
CDMA2000® Receiver Tests Under Fading Conditions with R&S CMU and ABFS
21-Jan-2005 | AN-No. 1MA64