3 Results
DOCSIS has become the established standard for return channels when it comes to implementing interactive services in broadband cable networks. The quality of these signals is essential to network efficiency. The analysis can be done using the highprecision R&S®ETL, R&S®EFA and R&S®FSH3-TV TV test receivers that have proven themselves in the downstream. These T & M instruments can be quickly and easily configured for measuring the upstream.
13-Jul-2012
The voltage standing wave ratio (VSWR) is one of the parameters in RF systems that measures the impedance mismatch. Under ideal conditions, when the load is perfectly matched to the source, the VSWR will be 1. A mismatch in the system causes reflections that will increase the VSWR and lead to losses in transmission. Although most RF components are typically designed and specified with a characteristic impedance of 50 Ω , applications and system components for cable television are designed and specified with a characteristic impedance of 75 Ω . This application note describes the measurement procedure for VSWR measurements in 75 Ω systems using the R&S®FSH3-TV handheld TV analyzer.
01-Mar-2008 | AN-No. 7BM72
Measuring cable characteristics is important when it comes to installing and servicing cable TV systems. Cable pinches or poor connections considerably influence the characteristics of cable TV systems. This document shows how the measurement is carried out in a 75 Ohm system. The basics of distance-to-fault measurements, the test setup, calibration and measurement are discussed.
21-Sep-2006 | AN-No. 7BM60