421 Results
This video shows how to measure noise figure and gain of an amplifier at around 90 GHz using the smart noise source R&S FS-SNS110 and the external frontend R&S FE110SR in combination with a spectrum analyzer. Noise Figure and Gain Measurements of amplifiers from 75 GHz to 110 GHz
20-Oct-2021
Rohde & Schwarz extends portable analyzer frequency ranges up to 44 GHzNew base models for the rugged R&S Spectrum Rider FPH analyzers take spectrum analysis capability up to 44 GHz. They combine the functionality of benchtop instruments and the lightweight portability of a handheld instrument, with intuitive features to make high performance measuring on the go fast and simple.
To meet the emerging need for several GHz bandwidth, the basebands of a 2-path R&S®SMW200A signal generator can be combined to provide a signal with 4 GHz instantaneous RF bandwidth, with a simple external hardware combiner and software option.
To achieve these data rates wider signal bandwidths of 500 MHz, 1 GHz and even up to 2 GHz are considered, only available at higher frequencies sub 6 GHz and beyond.
Automotive radar sensors are safety-relevant and have to be comprehensively tested for reliable functioning. The R&S ® AREG100A automotive radar echo generator is a versatile instrument for stimulating radars in the 24 GHz ISM band and in the 77 GHz and 79 GHz frequency bands. Together with the R&S ® ATS1500A shielded chamber, it offers a compact solution in a minimum footprint – perfect for lean production environments.
06-Aug-2018
Measurement Setup for Phase Noise Test at Frequencies above 50 GHz with two external harmonic mixers in combination with a commercially available phase noise tester. Signal sources with frequencies up to 500 GHz can theoretically be measured with this setup.
05-Feb-2018 | AN-No. 1EF101
08-Dec-2021
Sivers Semiconductors and Rohde & Schwarz collaborate on testing 5G RF transceivers up to 71 GHzAs 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.
The R&S®CMW100 communications manufacturing test set with a supported bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices in production. 3GPP's 5G NR will support frequency ranges up to 52.6 GHz, but initial 5G designs will use frequencies below 6 GHz with focus on 3.5 GHz.
Satellite ground station testing up to 44 GHz with the R&S®Spectrum Rider FPH handheld spectrum analyzer
24-Jul-2024
How to read the Scan Data from 30 MHz to 1 GHz?
10-Sep-2020
Rohde & Schwarz upgrades R&S FSW signal and spectrum analyzer to 8.3 GHz internal analysis bandwidthWith the new R&S FSW-B8001 option, the well-established R&S FSW high-end signal and spectrum analyzer now supports an industry-leading 8.3 GHz internal analysis bandwidth, offering unequaled dynamic range and sensitivity. Design engineers developing latest radar and wireless communications technologies as well as future satellite systems will benefit significantly from the extended bandwidth available in a one-box solution.
21-Jan-2021
High speed, high accuracy RF power measurements up to an unrivalled 67 GHz with the R&S NRP67S/SN power sensorsRohde & Schwarz has increased the maximum measurable frequency of its three-path diode power sensors to an unrivalled 67 GHz. The three-path technology enables extremely fast and accurate power measurements with a high-sensitivity, portable instrument of minimum size and weight. This frequency extension makes high speed power measurements possible for additional applications such as IEEE 802.11ay and 802.11ad WiGig Wireless LAN, millimeter-wave terrestrial short distance communication links, and satellite-satellite links operating at 60 GHz.
15-Nov-2022
Enhanced R&S NRPxxP RF wideband power measurement sensor family with maximum frequency of 50 GHzUpgraded Rohde & Schwarz compact standalone wideband sensors for power measurements make up the R&S NRPxxP family. The R&S NRP50P is the latest model and engineers can now measure power levels from –60 dBm to +20 dBm at frequencies from 50 MHz to 50 GHz. The sensor is ideal for installing, maintaining and monitoring wireless communications systems.
21-Apr-2022
Rohde & Schwarz launches new outdoor spectrum monitoring and radiolocation solutionThe new compact R&S UMS400 universal monitoring system meets spectrum monitoring and radiolocation needs in ever-increasing frequency ranges for wireless communications services.
This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz. The new R&S FE110ST/SR TX/RX frontends extend the frequency range of Rohde & Schwarz signal sources such as the R&S SMW200A vector signal generator and signal analysis instruments such as the R&S RTP oscilloscope to cover the W band from 70 GHz to 110 GHz.
The video demonstrates the simultaneous measurement of 5G NR signals in the mmWave frequency range at 28 GHz and LTE in sub 6 GHz using a single network scanner in a 5G backpack for coverage and beamforming tests.
At the European Microwave Week 2011, Rohde & Schwarz presented the new R&S®SMZ frequency multipliers which offer precise and adjustable output levels from 50 GHz to 110 GHz. At the European Microwave Week 2011, Rohde & Schwarz presented the new R&S®SMZ frequency multipliers which offer precise and adjustable output levels from 50 GHz to 110 GHz.
Rohde & Schwarz is the first to introduce a 40 GHz midrange vector network analyzer with four ports and a second internal signal source for mixer measurements. Rohde & Schwarz is the first to introduce a 40 GHz midrange vector network analyzer with four ports and a second internal signal source for mixer measurements.
R&S®FE44S External Frontend 24 GHz to 44 GHz - Product Brochure
The R&S®FE44S external frontend can extend the frequency range up to 44 GHz for Rohde & Schwarz signal and spectrum analyzers as well as signal generators. The R&S®FE44S enables signal up and downconversion directly at the device under test (DUT), lowering cable losses, increasing sensitivity and delivering more power at the antenna in an OTA environment.
The R&S®FE50DTR external frontend can extend the frequency range up to 50 GHz for Rohde & Schwarz signal and spectrum analyzers as well as signal generators. The R&S®FE50DTR enables signal up and downconversion directly at the device under test (DUT), lowering cable losses, increasing sensitivity and delivering more power at the antenna in an OTA environment.
R&S®FE50DTR External Frontend 36 GHz to 50 GHz - Product Brochure
17-Mar-2023
EMV Show 2023: EMCE measurements with new isotropic antenna up to 8 GHz from Rohde & Schwarz for Wi-Fi 6E and new 5G bandsRohde & Schwarz will present its new R&S TSEMF-B2E isotropic antenna for the TS-EMF measurement system at the EMV trade show in Stuttgart. This new antenna covers the frequency range from 700 MHz to 8 GHz and allows simple and precise evaluation of emissions on site – even for new radio services. When combined with Rohde & Schwarz spectrum analyzers, the R&S TS-EMF measurement system detects high‑frequency electromagnetic fields (EMF) in the environment.
HA-Z24E External Preamplifier 1 GHz to 85 GHz Specifications
Automotive radar signal analysis in the E-band with up to 8.3 GHz analysis bandwidth with just a single instrument. The video demonstrate the analysis of a 4 GHz wide FMCW radar signal from a real device under test. Automotive Radar Analysis, E-Band, FMCW radar analysis Automotive radar signal analysis in the E-band with up to 8.3 GHz analysis bandwidth with just a single instrument.
Rohde & Schwarz demonstrated 5 GHz signal analysis bandwidth at the European Microwave Week 2017 in Nuremberg. Rohde & Schwarz demonstrated 5 GHz signal analysis bandwidth at the European Microwave Week 2017 in Nuremberg.
Its dual-path concept and high-power signal generation up to 20 GHz make the R&S SMW200A vector signal generator ideal for efficient testing of blocking characteristics.
30-May-2014
In this video we analyze the current regulatory landscape for the spectrum beyond 100 GHz and take a closer look at D-Band, supporting frequencies from 110 to 170 GHz.
22-Sep-2022
Rohde & Schwarz paves way for early sub-THz research activities with new R&S FE170 D band frontend extensionsFor more information, visit: https://www.rohde-schwarz.com/product/FE170 200_61133 The R&S FE170ST and R&S FE170SR extend the frequency range of the R&S SMW200A and the R&S FSW to 110 GHz to 170 GHz.