419 Results
This video demonstrates how to test a power amplifier that operates at 28 GHz. We use a downlink signal characteristic based on a waveform that follows the Verizon Wireless 5G specification. This video demonstrates how to test a power amplifier that operates at 28 GHz. We use a downlink signal characteristic based on a waveform that follows the Verizon Wireless 5G specification.
DFS Analysis Tool, Dynamic Frequency Selection in the 5 GHz Band
30-Mar-2007 | AN-No. 1EF59
16-Sep-2020
Rohde & Schwarz launches high-performance ELINT receiverR&S WPU2000 covers a broad frequency range ( 20 MHz to 18 GHz optionally extendable down to 8 kHz or up to 40 GHz ). Its 2 GHz real-time bandwidth allows interception and analysis of the most complex wideband signals emitted by state-of-the-art frequency agile radar systems.
Rohde & Schwarz Manual for the R&S®TSMS53DC ultracompact downconverter.
HM8134-3, HM8134-3X 1,2 GHz HF-Synthesizer - Data sheet
Rohde & Schwarz Manual for the R&S®SZV100A Q-/V-Band 36- 56 GHz RF-Upconverter.
It also enables to carry out multi-standard measurements of 5G mmWave and LTE sub 6 GHz.
Using the R&S®TS8980 RF test system up to two carriers in the unlicensed spectrum above 5 GHz can be aggregated to the first carrier in a licensed spectrum. The test cases have been implemented in line with the LTE-U test specification.
Offering a frequency range up to 50 GHz and 320 MHz demodulation bandwidth makes the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz ideal for millimeter wave signal analysis. The video demonstrates signal analysis of a very fast and wide bandwidth pulse at 80 GHz, generated with the R&S®SMF100A microwave signal generator in combination with the R&S®SMZ frequency multiplier.
The alternative approach presented in this paper employs a low phase noise local oscillator for direct down-conversion of the DUT signal.
09-May-2016
Welcome to our short video tutorials on how to test radars using Rohde & Schwarz test equipment. Access to most information about radar is pretty restricted, as many radar applications are military or secretive industrial research.
03-Feb-2014 | AN-No. 1MA209
Additionally, the acquisition of two FE110SR signals with a maximum bandwith of 10 GHz in a frequency range of 70 to 110 GHz is possible the RTP oscilloscope. RTP Oscilloscopes with External Frontends (Part 5 ) RTP Oscilloscopes with External Frontends - Automotive Radar
The 28 GHz band is one of the 5G frequency candidates that gains a lot of attention in South Korea and the USA. Signal bandwidths of up to 500 MHz are under discussion. The 28 GHz band is one of the 5G frequency candidates that gains a lot of attention in South Korea and the USA. Signal bandwidths of up to 500 MHz are under discussion.
EVM Measurements for ZigBee signals in the 2.4 GHz band
12-Dec-2014 | AN-No. 1EF55
29-Mar-2023
Rohde & Schwarz expands its new ultra-wideband RF amplifier family BBA300: High availability and extended range for critical test environmentsRohde & Schwarz has extended its proven BBA300 RF amplifier portfolio with a new powerful 90 W model for CDE and DE series. Designed for test environments, the BBA300 amplifiers offer 380 MHz to 6 GHz in one frequency band and up to 250 W output power.
The R&S®MC40 extends the frequency range of modern 18 GHz to 40 GHz monitoring systems. With a 2 GHz conversion bandwidth, it is a future-ready investment to meet the requirements of tomorrow’s signal environments. The small form factor and the open SCPI interface support easy integration into any existing system.
06-Jun-2022
Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS2022Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS 2022.
For early 6G R&D in the 110-170 GHz D-Band, R&S introduces FE170 Frontends Watch this video to get an introduction into 6G R&D in the 110-170 GHz D-Band and FE170 Frontends introduced by R&S. D band frequencies are significantly higher than the maximum frequency of any single box generators or analyzers currently available.
V2X – vehicle-to-everything communication, based on 5G NR FR1 at 5.9 GHz is the next big step for car communication. This requires a powerful test instrument capable to test all important measurement parameters such as spectrum, power, and EMV of the 5G-V2X sidelink signal at 5.9 GHz.
The video demonstrates how to perform 5G NR network measurements at 3.5 GHz. In the example shown, the R&S®SMW200A vector signal generator generates a 5G NR signal The video demonstrates how to perform 5G NR network measurements at 3.5 GHz. In the example shown, the R&S®SMW200A vector signal generator generates a 5G NR signal.
Automatic Phase Noise Measurements with Modulation Analyzer FMA (or FMAB or FMB) and Option FMA-B8
03-Jun-1998 | AN-No. 1EF15
The R&S®CS-MC20 microwave downconverter extends the frequency range of the R&S®EM200 and R&S®UMS400 receivers up to 20 GHz and is fully controlled by the receiver. In combination with the R&S®HF907OM omnidirectional monitoring antenna, a wide range of applications can be addressed.
13-Jun-2024
Rohde & Schwarz achieves breakthrough in sub-THz research with 140 GHz multi-channel transceiver characterizationRohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.
15-Mar-2022
Rohde & Schwarz releases ultrawide band RF amplifierRohde & Schwarz and Pixel Power provide Europe’s leading Japanese-language broadcaster with a high performance, high availability solution for ingest, storage and playout.
This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages.
10-Jun-2016 | AN-No. 1MA267
The R&S®ESMW ultra wideband monitoring receiver is the perfect solution to address future trends and challenges in spectrum monitoring. It covers the wide frequency range of 8 kHz to 40 GHz with an outstand-ing real-time bandwidth of up to 2 GHz. In combination with Rohde & Schwarz single-channel direction find-ing (DF) antennas, it supports angle of arrival (AoA) direction finding from 300 kHz to 8.5 GHz.
Millimeter-Wave Measurements Using Converters of the R&S<sup>®</sup> ZVA Family
09-Oct-2007 | AN-No. 1EZ55
23-Jun-2021
Rohde & Schwarz presents mobile network infrastructure testing from design to production at MWC21 in BarcelonaRadio access network (RAN) landscapes deploy various kinds of infrastructure equipment, ranging from macro to small cell base stations. Evolving 5G NR technology in particular makes infrastructure equipment testing challenging due to increasing MIMO complexity and beamforming, wider bandwidths and new spectrum bands up to the mmWave range. Mobile World Congress is returning to Barcelona in June 2021, and Rohde & Schwarz will be showcasing its latest class-leading mobile network infrastructure testing solutions, which address various needs and enable the mobile industry to leverage the opportunities of 5G.