60 Results
ANSI/SCTE 40 Conformance Testing Using the R&S SFU, R&S SFE and R&S SFE100
29-Oct-2009 | AN-No. 7BM68
LTE Location Based Services (LBS) involve the process of determining where a device is located.
29-May-2015 | AN-No. 1SP05
Simulation of BCCH Channel of GSM/PCN Base Station with Signal Generator SME
01-Jul-1999 | AN-No. 1GPAN14
Powerful end-to-end encryption for Ethernet private lines: R&S SITLine ETH protects against spionage and manipulation without decreasing throughput.
03-Mar-2015
ZONE PLATE SIGNALS 525 Lines Standard M/NTSC
20-Jul-2001 | AN-No. 7BM23
ZONE PLATE SIGNALS 625 Lines Standard BG/PAL
20-Jul-2001 | AN-No. 7BM24
Measurement of Clicks on Audio Lines using the Audio Analyzers UPL or UPD
04-Jun-1998 | AN-No. 1GA31
The R&S ® AREG100A automotive radar echo generator provides OEM test engineers with a powerful solution for reliable testing of automotive radar sensors during final inspection at the end of assembly lines.
13-Aug-2018
R&S®ZNB offers all the functionality needed to test digital high-speed signal structures on PCBs in one box.
20-Sep-2016
This document describes a method to separate common-mode and differential-mode separation using two oscilloscope channels. This separation approach works without any additional hardware component.
17-Sep-2020 | AN-No. GFM353
The most common abbreviations used in the standards for digital TV: MPEG2, DVB and ATSC
20-Jul-2001 | AN-No. 7BM27
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
Exchanging Data Records between Different Test Receiver Models
18-Jan-2002 | AN-No. 1EE19
In this paper a rapid characterization of high speed digital channels using a multiport VNA is demonstrated.The VNA is a major tool in the field of communication and signal processing.
18-Mar-2020 | AN-No. 1EZ83_0E
This application note provides an introduction to the DDR memory technology and explains common challenges, related to the specific nature of DDR data, command and control buses.
30-Oct-2020 | AN-No. GFM340
Guidelines for MIMO Test Setups – Part 1
10-Mar-2010 | AN-No. 1GP50
Guidelines for MIMO Test Setups – Part 2
14-Oct-2009 | AN-No. 1GP51
An error in DVB-T2 signal feed to the transmitter can cause failure of the entire DVB-T2 network. For this reason, the established ETSI TR 101 290 DVB measurement guidelines have been expanded to include measurements for the new T2-MI interface. The instruments of the R&S DVMS family monitor T2-MI signals by performing these newly defined measurements and even provide in-depth analysis of these signals.
01-Sep-2011
ATSC receivers must fulfill the ATSC Receiver Performance Guidelines before they can be sold freely in the markets that have adopted the standard.
29-Sep-2016 | AN-No. 1GP111
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
This application note describes in detail the steps required to make a noise figure measurement on a spectrum analyzer using the “Y Factor” technique. Background equations are presented for each step of the calculation.
25-Jul-2012 | AN-No. 1MA178
Creating MediaFLO™ Test Scenarios in Accordance with the Minimum Performance Specification (MPS) V 1.2
31-Aug-2006 | AN-No. 7BM62
This application note briefly summarizes the history of SCPI and outlines in which fields of application a SCPI based test system software has still advantages over a driver (e.g. IVI) based approach.
18-Oct-2017 | AN-No. 1GP98
Comprehensive PCR Analysis - Using the R&S DVM Family from Rohde & Schwarz R&S DVM50/DVM100/DVM120/DVM400
01-Jun-2006 | AN-No. 7BM55
HSDPA - Challenges for UE Power Amplifier Design
11-Jul-2011 | AN-No. 1MA84
Tolerance to Noise Tests for DTV Receivers
26-Jan-2007 | AN-No. 7BM64
Cell search and cell selection in UMTS LTE
17-Sep-2009 | AN-No. 1MA150
Doc.A/74 ATSC Receiver Performance Tests Made Easy with the R&S<sup>®</sup> SFU Broadcast Test System and the R&S<sup>®</sup> SFE Broadcast Tester
27-Sep-2012 | AN-No. 7BM71
Solutions and Tipps for NR FR1 in TDD Downlink Mode
5G New Radio (NR) is a radio technology specified by 3GPP and was first released in 3GPP release 15. It is designed to target three use cases, i.e. enhanced mobile broadband (eMBB), massive machine type communication (mMTC) and ultra-reliable low latency communication (URLLC). Among these three use cases, eMBB represents actually a further evolution of mobile broadband communication from LTE standard. According to the technical performance requirement defined by IMT-2020, by deploying 5G technology, peak data rates of eMBB application are expected to reach 20 Gbps in downlink (DL) and 10 Gbps in uplink (UL) direction, respectively. Typical use cases of eMBB are data hungry applications, such as high resolution 8K video streaming, virtual reality (VR), augmented reality (AR) etc.Verification of a 5G capable user equipment (UE) with respect to its achievable maximum data throughput under controllable and deterministic test conditions is an essential process during the design phase of the product. Performance centric verification through identification of the data throughput bottleneck, product benchmarking against a golden device enhances tremendously the user experience in the end.This document focuses on 5G NR frequency range 1 (FR1) with TDD duplex mode in E-UTRAN New-radio Dual Connectivity (ENDC) operating mode. As 5G NR physical layer offers a plethora of flexibility, the motivation here is to provide a kind of guideline of relevant parameter settings to stimulate device under test (DUT)'s max throughput capacity. The status quo of the R&S solutions at the time when the application note is created are described. Shown feature sets are constantly evolving, so the screenshots used and the parameters shown may change.
07-Jul-2022 | AN-No. 1SL379