4398 Results
All wireless devices must be tested for radiated spurious emissions (RSE) to verify compliance with national and international standards such as ITU, ETSI and FCC. The configuration required is similar to an EMI measurement setup, with the additional challenging task of measuring the low level spurious emissions in presence of the carrier frequency of a wireless device. The R&S®TS8996 RSE test system handles these tasks with a single setup and covers all relevant carrier frequencies and bandwidths used in wireless communications.
The R&S®CS-MC53 microwave converter extends the frequency range of the R&S®EM200 digital compact receiver and the R&S®UMS400 universal monitoring system (both combined with the R&S®CS-MC20 microwave converter) as well as the R&S®ESMW ultra wideband monitoring receiver from 17 GHz to 53 GHz and supports up to 500 MHz real-time bandwidth. Thanks to its ultracompact and lightweight weatherproof housing, it can be installed next to the antenna to keep cable losses at a minimum for highest sensitivity.
Coexistence testing for GNSS receivers The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE.
Performing complex measurements at the push of a button, the R&S®FSWP is ideal for high performance radar and communication system applications. The phase noise tester can also be upgraded to a signal and spectrum analyzer. R&S®FSWP, FSWP, phase noise, VCO tester The new R&S®FSWP phase noise and VCO tester from Rohde & Schwarz sets new standards in terms of sensitivity and measurement speed.
Thus the user is well prepared for any measurement task, from very fast full-span overview measurements up to the detection of sporadic interferers or the monitoring of frequency-hopping radio systems. R&S®FSVR, FSVR, Real-Time Spectrum Analyzer The FSVR is the first spectrum analyzer with two analysis modes: conventional (heterodyne) spectrum analysis and real-time (FFT) analysis.
For the first time they are now able to enter realistic and reproducible scenarios in the lab, making the new Rohde & Schwarz radar test system the most advanced solution on the market. Watch and get the insights. automotive radar object simulation, radar test system A video about automotive radar object simulation with focus on the radar test system from Rohde & Schwarz.
Configure technology standards to the captured signal and get predefined settings for standard-specific Baud-rate, CDR settings, PAM-orders or even Equalizer & Embedding configurations. Embedding & Equalization with the R&S RTP Oscilloscope (Part 1) Learn about key advantages of the Embedding and Equalization option of the R&S RTP & RTO6 oscilloscopes. Start with the Signal Configurator.
With the R&S®NRQ6-K3 phase coherence option, the R&S®NRQ6 power sensor offers a simple solution to perform outstanding phase coherent measurements as required e.g for beamforming and massive MIMO applications.
For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements. Video, RTA4000, Oscilloscope, Digital channels The R&S®RTA-B1 option turns every R&S®RTA4000 into an intuitive-to-use MSO with 16 additional digital channels.
SMBV100A Vector Signal Generator, Video Whether in the R & D lab or in production, the global navigation satellite system (GNSS) solution for the R&S®SMBV100A sets new standards in the field of satellite simulation
Reconfigurable Intelligent Surfaces (RIS) are a hot research topic for 6G, the next generation of wireless communication. Previous wireless communication schemes have treated the radio channel itself as inalterable, and designed the transmission scheme accordingly.
For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements. Video, RTM3000, Oscilloscope, digtal channals The R&S®RTM-B1 option turns every R&S®RTM3000 into an intuitive-to-use MSO with 16 additional digital channels.
The user captures longer acquisition sequences even at high sampling rates for more analysis results, e.g. when analyzing transients of switched-mode power supplies. Video, RTM3000, Oscilloscope, Memory Preview The R&S®RTM3000 offers a class-leading memory depth:40 Msample per channel are available, even 80 Msample in interleaved mode.
A great conversation between two antenna experts for all of us interested on antenna design, phased array trends and over-the-air measurements. Video: HL Highly integrated phased array antenna design and the required testing
A small form factor puts the instrument as close as possible to the test fixture, allowing for the shortest possible cable connections CMW100, multi-device communications, manufacturing test, set, multiport, frontend, parallel receiver test function, broadcasting, shortest possible cable connections Rohde & Schwarz presented the R&S®CMW100 multi-device communications manufacturing test set at the GSMA
This helps to provide better visualization of interferers in 5G networks occupying the same frequency as the wanted signal. 5G, 5G NR, Mobile Network Testing, MNT Follow this video series on our latest T&M innvoations for 5G devices, base stations and 5G mobile networks and many more topics.
See what Andreas Pauly, Vice President Signal Generators, Audio Analyzers and Power Meters, Frank-Werner Thuemmler, Product Manager for Signal Generators and Power Meters, and Jürgen Ostermeier, Director of R&D Microwave Signal Generators, have to say about the all-new high-end analog RF and microwave signal generator.
The R&S ® CMW-KM052 option for the established R&S ® CMW500 wideband radio communication tester helps to detect vulnerabilities in the IP connection security of IoT devices, mobile devices and car telematics units under controlled network conditions.
Furthermore, spectrogram and zone trigger in frequency domain enable in-depth signal analysis and advanced trigger settings for spectral signal components. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi Operate the R&S®RTO6 frequency analysis function like a spectrum analyzer and benefit from RF knowledge put into an oscilloscope.
For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements. R&S®RTC1000 video, oscillsocope, test and measurement, Rohde und Schwarz The R&S®RTC1000 option turns every R&S®RTC1000 into an intuitive-to-use MSO with 8 additional digital channels.
Combined with an optional frequency range extension up to 90 GHz and the R&S®HA-Z24E external preamplifier operating from 1 GHz to 85 GHz, makes the R&S®FSW85 signal and spectrum analyzer ideal for analyzing wideband signals such as automotive radar FMCW chirp signals, IEEE 802.11ay signals and 5G waveform candidates. video, signal analyzer, spectrum analyzer, FSW85, HA-Z24E, EuMW 2017 R&S®Wideband
R&S is providing with its R&S®SMW200A and R&S@FSW solutions for testing and qualifying the performance of components and systems by generating and analyzing a 5G NR and DVB-S2 signals. Co-existence of 5G NR and DVB-S2 | Rohde & Schwarz Learn how to perform qualification measurements on satellite components and systems with the R&S®SMW200A and R&S@FSW .
Each interface card in the gateway runs its own intelligent software application for call signaling and media handling, completely independent of each other. ATC Gateways, VoIP, VoIP Gateways, ATC network The R&S®GW5440 Universal Media Gateway is a flexible system of media and server cards used as a radio, VCS and telephony gateway.
Signal generator, SMA100B, phase noise performance R&S®SMA100B phase noise performance for radar engineering, data converter testing, base station blocking tests.
Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines.
Equipped with the R&S®RTO-K11 I/Q software interface option, the R&S®RTO provides the I/Q data of the acquired signals to the external R&S®FS-K10xPC LTE analysis software for demodulation and detailed analysis. video, LTE, MIMO, FS-K10xPC, RTO, RTO-K11 Rohde & Schwarz at EuMW 2012: Up to 4 LTE MIMO antenna signal analysis with one oscilloscope
PACE2 NAT/Mobile Tethering Transparency Plug-in Tethering fraud - Flyer
The results make it easy to evaluate energy efficiency measures such as advanced sleep modes and provide ratings for radio units based on their power consumption. The R&S NGP power supply units power the radio unit and monitor voltage and current statistics over time. 5G, Mobile World Congress, O-RAN, oscilloscope Video: O-RU energy efficiency testing