8427 Results
Getting started with IQ Streaming Application
The intention of this Application Note is to provide an overview of all necessary tasks for getting along with successful IQ Streaming.The necessary technical requirements are described as well as the streaming parameters of the IQ data stream.The general operation and basic setup of the MSR4 is described in the user manual and is not part of this document.
28-Mar-2023 | AN-No. 1179.7104.02
based on SCPI command sequences
MINX – the Measurement Instrument Network eXplorer – is a fast, non-invasive discovery and configuration software from Rohde & Schwarz for LAN and USB T&M instruments.
12-Jan-2021 | AN-No. GFM344
RF Transient Analysis SoftwareThis application note describes a software application that can be utilized in conjunction with Rohde&Schwarz Signal- and Spectrum Analyzers and Signal Source Analyzers to capture and analyze transient signals.
16-Feb-2009 | AN-No. 1MA141
The SFU200A and SFE100 can be used to simulate the performance of many different types of receivers in the SFU200A and SFE100. This paper describes how to use these tools to simulate a correlated receiver using R&S®SFU.
19-Oct-2012 | AN-No. 7BM76
Learn more about the world’s first fully electronically steerable antenna array.
27-Jun-2023
Delay measurements in digital TV studios with Digital Video Component Analyzer VCA
20-Jul-2001 | AN-No. 7BM13
This application notes shows how to configure, run, and automatically document tests in a sequence coming with EMC32-K51.
17-Jul-2014 | AN-No. 1SP07
Generation and Measurement of Burst Digital Audio Signals with Audio Analyzer UPD
05-Nov-1997 | AN-No. 1GA38
Remote Control of STREAM EXPLORER via OLE Interfacing
31-Mar-1999 | AN-No. 7BM02
A single instrument, the R&S®ETL TV analyzer, performs all required DAB transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.
24-Jul-2013 | AN-No. 7BM104
This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.
26-Apr-2013 | AN-No. 1GP79
The objective of this paper is to evaluate the performance of a power supply using an oscilloscope. The main measurements taken are the input frequency, output voltage, output current, and the switching frequency.
26-Nov-2013 | AN-No. 1TD04
Speeding up production test with the R&S<sup>®</sup> SMATE200A
17-Apr-2007 | AN-No. 1GP63
Rohde & Schwarz offers unique one-box solutions for reliable testing of air navigation systems such as ILS, VOR and DME.
04-Nov-2010
This application note describes how to configure a Rohde & Schwarz Network Analyzer to make spectral measurements directly on a device under test.
16-Mar-2012 | AN-No. 1EZ62
Signals produced by SAF and SFF - Standard BG/PAL and N/PAL
20-Jul-2001 | AN-No. 7BM25
This application note focuses on fully automated, fast and accurate measurements, of linear FMCW radar signals. It explains the basic signal processing, the impact on radar key performance indicators in case of linearity deviations and explains test and measurement of linear FMCW signals in detail.
25-Apr-2014 | AN-No. 1EF88
This white paper describes the basic functionality of antennas. Starting with Hertz's Antenna model followed by a short introduction to the fundamentals of wave propagation, the important general characteristics of an antenna and its associated parameters are explained.
04-Nov-2014 | AN-No. 8GE01
Reproducable Noise Figure Measurement Using the Shielded Box ZA-SB10
16-Oct-2002 | AN-No. RSH01
This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types.
09-Apr-2015 | AN-No. 1MA99
C/N Ratio at Low Carrier Frequencies in SFQ
20-Jul-2001 | AN-No. 7BM09
Measurement Method for Determining the Equivalent Reflection Coefficient of Directional Couplers and Power Splitters
13-Dec-2002 | AN-No. 1EZ51
Bit Error Ratio BER in DVB as a Function of S/N
08-May-2002 | AN-No. 7BM03
Signals produced by SAF and SFF - Standard M/NTSC and M/PAL
05-Aug-2010 | AN-No. 7BM26
Migration to Visual Studio .NET 2005 of proprietary Test Cases
28-Nov-2007 | AN-No. 1CM63
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10.
27-Nov-2013 | AN-No. 1CM97
This application card describes the structure of the crowdsourcing space and analyzes the pros and cons of both approaches.
06-Oct-2022
Design and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG
15-Feb-2002 | AN-No. 7BM38