421 Results
22-Dec-2021
Rohde & Schwarz collaborates with Broadcom on test solution for next generation 6-GHz Wi-Fi devicesThe R&S CMP180 radio communication tester has been successfully validated for Broadcom’s Wi-Fi 6E chipsets. OEMs and ODMs of wireless devices are now able to bring their first next generation 6-GHz products to the market.
This paper provides an important insight into the design and measurement challenges around the key topic of 5G New Radio in collaboration of a number of industry partners.
26-Nov-2018
Rohde & Schwarz quick reference guide for the R&S®ETH handheld TV analyzer. Portable digital TV signal analysis up to 3.6 GHz/8 GHz.
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
16-Jun-2015 | AN-No. 1EF92
21-Dec-2023
Rohde & Schwarz and VIAVI jointly verify Analog Devices’ leading O-RU reference design at i14y Lab PlugFest Fall 2023Rohde & Schwarz and VIAVI Solutions have presented their integrated solution for conformance testing of O-RAN Radio Units at the recent O-RAN ALLIANCE Global PlugFest Fall 2023, hosted at the i14y Lab in Berlin – supported by Deutsche Telekom and EANTC and i14y consortium partners.
R&S SGT100A – Share a 1 GHz reference to obtain phase coherent signals - Application Card
13-Sep-2023
EuMW 2023: Rohde & Schwarz introduces the shortest possible distance simulation for FMCW radarsEuMW 2023: Rohde & Schwarz introduces the shortest possible distance simulation for FMCW radars
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
07-Sep-2022
R&S FSV and R&S FSVA signal and spectrum analyzers from Rohde & Schwarz extend frequency up to 50 GHzThe signal and spectrum analyzer family now also support the full FR2 frequency range up to 52.6 GHz.
17-Nov-2021
Rohde & Schwarz adds new frequency ranges to its portable all-rounder spectrum analyzersNew base models for the portable R&S FPL1000 take spectrum and signal analysis capabilities up to 26.5 GHz. They combine the functionality of benchtop instruments and the portability of a handheld instrument, with intuitive features to make high performance measuring on the go fast and simple.
11-Jul-2022
Rohde & Schwarz showcases its market-leading, reliable EMC test solutions at EMV in CologneAt the EMC event EMV in Cologne, Rohde & Schwarz demonstrates a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. As a highlight, the company unveils an important enhancement to the R&S ESW EMI test receiver, the new 1GHz bandwidth extension. The Rohde & Schwarz solutions are on display from July 12 to 14, 2022 at the Cologne exhibition center, hall 10.2, booth 112.
13-Oct-2020
Rohde & Schwarz propels 5G LBS with Assisted-GPS and 5G NR FR2 mmW performance testingAs wireless network operators roll out 5G NR in the millimeter wave spectrum, it is critical to ensure continued reliability of E911 calls and accurate determination of location in mobile devices.
Rohde & Schwarz Manual for the R&S®TSME30DC, R&S®TSME44DC Ultracompact Downconverter.
07-Mar-2024
Rohde & Schwarz introduces dedicated phase noise analysis and VCO measurements up to 50 GHz with the R&S FSPN50With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.
13-Mar-2023
Rohde & Schwarz and SatixFy to demonstrate wideband DVB-S2X beam hopping and DVB-RCS2 at Satellite Show 2023Rohde & Schwarz will showcase an end-to-end test infrastructure featuring its R&S SMW200A vector signal generator and R&S FSW signal and spectrum analyzer together with SatixFy’s Sx3099 modem ASIC demonstrating DVB-S2X Annex E wide bandwidth beam hopping and high bit rate DVB-RCS2 transmission.
23-Apr-2024
Rohde & Schwarz introduces new R&S SMB100B microwave signal generator for analog signal generation up to 40 GHzThe new R&S SMB100B microwave signal generator available up to 40 GHz brings excellent output power, spectral purity, very low close-in phase noise, and practically no wideband noise to analog microwave signal generation.
30-May-2023
Rohde & Schwarz and IEMN collaborate on 6G THz by bringing together electronic and photonic technologiesThe Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.
R&S Fxx-K30 Measure noise figure above 110GHz - Application Card
28-Nov-2023
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
12-Sep-2023
Rohde & Schwarz continues to drive early 6G and sub-THz research with new dedicated W and D band test solutionsRohde & Schwarz rolls out cutting-edge RF test & measurement solutions for mmWave and sub-THz research at EuMW 2023 to characterize devices for 6G and novel sensing and automotive radar applications of tomorrow.
02-Dec-2021
Signal source analyzer from Rohde & Schwarz in operation at laboratories of US Air ForceAFMETCAL, the Air Force Metrology and Calibration Authority, has ordered signal source analyzers (SSA) from Rohde & Schwarz. They will be operated in AFMETCAL’s precision measurement equipment laboratories (PMEL’s) and Air Force primary standards laboratory (AFPSL). The signal source analyzers are used for calibration of phase noise analog (AM, FM & PM) and digital modulation measurements. For phase noise measurement Rohde & Schwarz has also provided cross-correlation offering very high sensitivity, flexibility and fast measurement speed — all in one box.
03-May-2023
Rohde & Schwarz demonstrates solutions for particle accelerators at IPAC’23 in VeniceAt IPAC’23 in Venice, Italy, Rohde & Schwarz demonstrates solutions that meet high precision particle accelerator requirements, address challenges in elementary particle research, particle therapy applications, material characterization, precise beam forming and monitoring as well as safe storage.
23-May-2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.
Frequency extension up to 110 GHz or 175 GHz for wideband signal analysis and generation.
15-Feb-2024
Rohde & Schwarz enables Qualcomm to pioneer new frequency ranges for future 5G-Advanced and 6G networksRohde & Schwarz T&M equipment plays key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3, the future frequency ranges for 5G-Advanced and 6G.
In this video we use the ZNB20 20GHz Vector network analyzer together with an shielded twisted pair (STP) cable assembly using a miniaturized multi-gigabit connector system from TE Connectivity the BEAMnet. This cable assembly consist of 5 cable segments using 4 in-line connectors. The TE Connectivity BEAMnet connectors support frequencies up to 15GHz.
R&S QAR Quality Automotive Radome Tester - Product Brochure
R&S DDF260 Digital Direction Finder - Product Brochure