Learn about the upgraded features of the R&S®SMB100B microwave signal generator including low SSB, high output power, low harmonics and closed-loop power control.
Product video: R&S®RadEsT – The essential in radar testing
The R&S®RadEsT automotive radar essential tester is provides OEMS and Tier 1s with dynamic and precise target generation for debugging of reference designs and software.
Application video: Low-ESL/ESR measurements of DC-Link capacitors
This video shows how you can precisely characterize the ESR and ESL of electric vehicle traction inverter DC-link capacitors over a frequency range of interest using the Zurich Instruments MFIA impedance analyzer.
Don't miss the latest version of the passive monitoring tool R&S®AVQA from Rohde & Schwarz. Thanks to new features, monitoring voice quality in your network is becoming much more easy.
Understand the decentralized high redundant architecture of the full IP CERTIUM VCS system providing maximum availability and flexibility for all customer needs.
Application video: Dürr and R&S solution for ADAS/AD functional testing for EOL and PTI
Dürr and R&S have developed an innovative, cost-effective solution for over-the-air (OTA) vehicle-in-the-loop (VIL) ADAS/AD testing. This solution validates conformity and effectiveness during end-of-line (EOL) testing or periodical technical inspection (PTI).
R&S®TSMx scanners provide a maximum degree of freedom and upgradeability for efficient walk and drive test campaigns. Watch this video to learn more about R&S®TSMx capabilities.
Product video: Transition seamlessly to radar production with the AREG-P target generator
Watch this video to discover the innovative capabilities of the AREG-P target generator, including parallel testing which bring CAPEX, OPEX, yield and througput benefits.
Discover the key features, benefits and integration capabilities of the R&S®FE170ST/SR, as well as how which real-world applications these frontends support.
Embedding & Equalization with the R&S RTP Oscilloscope (Part 2)
Learn how easy it is to configure a cable emulation within the Embedding setup dialog. For interface standards such as USB, necessary S-parameter files are included in the oscilloscope software.
Embedding & Equalization with the R&S RTP Oscilloscope (Part 3)
The Eye Diagram is an effective tool to validate signal integrity. This video compares the eye diagram on a signal acquired at the output of a USB transmitter versus a waveform with some added cable emulation.
Embedding & Equalization with the R&S RTP Oscilloscope (Part 4)
Learn how easy it is to configure a equalizer emulation within the Equalizer setup dialog. For interface standards such as USB, PCIe or DP, the necessary S-parameter files are included in the oscilloscope software.
RTP Oscilloscopes with External Frontends (Part 1)
The R&S FE External Frontends extend the frequency range of the RTP Oscilloscope up to 170 GHz. No additional equipment is needed for this compact and fully calibrated solution. Learn how easy it is to configure a external frontend directly by the RTP GUI.
RTP Oscilloscopes with External Frontends (Part 2 )
The R&S RTP oscilloscope offers a comprehensive set of tools for analysing widebad RF signals together with the external frontends downconverted. Start with powerful trigger events, responsive spectrum analysis or the unique IQ mode to prepare in depth signal analysis.
.
RTP Oscilloscopes with External Frontends (Part 3 )
The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis. This video demonstrates how easy the VSE software can analyze a 5G FR2 signal that was captured and downconverted by the FE44S external frontend and acquired by the RTP oscilloscope.
RTP Oscilloscopes with External Frontends (Part 4 )
The RTP oscilloscope can use up to 4 external frontends to acquire the respective IF signals for further analysis. Here we use two FE44S external frontends to test a 5G FR2 signal at 28 GHz. Signal analysis is performed by the R&S VSE software running directly on the RTP oscilloscope.
RTP Oscilloscopes with External Frontends (Part 5 )
Use the R&S RTP Oscilloscope with the R&S External Frontend FE110SR to debug your automotive radar devices. This example demonstrates the analysis of a bursted radar chirp signal with the FFT and Spectrogram. Analysis with the R&S VSE software and the Transient option enhances the characterization of radar signals. Additionally, the acquisition of two FE110SR signals with a maximum bandwith of 10 GHz in a frequency range of 70 to 110 GHz is possible the RTP oscilloscope.
This video shows how you can use the MXO Series K36 Frequency Response Analysis option to characterize the frequency response of your electric devices.
Quickly and reliably trigger and decode packets from your I2C bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
Quickly and reliably trigger and decode packets from your RS232 or RS485 buses using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the data format or display a decode table.
Quickly and reliably trigger and decode packets from your LIN bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
This video shows you how you can better place and stabilize your probes using the the Rohde & Schwarz 2D positioner for passive probes and the 3D positioner for other probes.
PAM-N Analysis with the R&S RTP Oscilloscope (Part 2)
Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.
Quickly and reliably trigger and decode packets from your SPI bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger or display the decode table.
PAM-N Analysis with the R&S RTP Oscilloscope (Part 3)
Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.
Watch this video to learn more about the ELEMC-REP option of R&S ELEKTRA EMC test automation software which enables users to create customized test summary reports by building on predefined report templates.
Watch this video to learn more about the ELEMC-SCP option of R&S ELEKTRA EMC test automation software which enables users to integrate oscilloscopes into their test setup for EUT monitoring during Immunity testing.
Wideband modulated measurements with the R&S®SFI100A Vector Signal Generator
This video shows how the R&S®SFI100A simplifies modulated measurements at IF and in the sub-terahertz frequency region in combination with the R&S®FE110ST/FE170ST frontends.
Closed-loop power control with R&S®SFI100A and R&S®NRP Power Sensors
Learn how the R&S®SFI100A vector signal generator can be used with the NRP Power Sensors to realize close loop power control at the output of a device under test such as a power amplifier.
The metaverse and XR - Part 1: Join us as we delve into the fundamental ideas of the Metaverse and its symbiotic relationship with extended reality (XR). Discover how these emerging paradigms promise to reshape our reality and propel us into a new era of connectivity and experience.
The metaverse and XR - Part 2: Join us and get an introduction to addressing new network challenges. Discover how 5G and 6G will enable the next generation of immersive experiences.
The metaverse and XR - Part 3: Join us and learn about the 5G and 5G-Advanced features that are laying the foundation for 6G high-fidelity XR and large-scale metaverse experiences.
Developing technologies to protect critical infrastructures is essential to a resilient society. That's why the Human Centered Security Lab (HCSL) in Marienpark offers a space to test security solutions under realistic conditions. This living laboratory demonstrates how to design a secure access process by integrating specialized solutions. Visit HCSL and discover the security of tomorrow.
Exceptional performance for next generation radiomonitoring
More and more devices will share the radio spectrum in the coming years. The R&S®ESMW helps regulators keep pace. Gain insights from the Mobile World Congress.
The R&S®QAT100 antenna array and R&S®AREG800A radar echo generator together make the most powerful and scalable automotive radar object simulation system available. Watch this video to see how its advanced features can cover all scenarios from single static objects to complex moving traffic scenarios.
Use the R&S®MXO 5 series oscilloscope to build the social hub in your lab. Be the center of the lab with the instrument every engineer wants to play with.
R&S and NOFFZ collaborate on automotive radar sensor production testing
The partnership between R&S and NOFFZ, combines the expertise of R&S radar object simulation and NOFFZ experience in turnkey production test systems to give automotive radar sensor suppliers a seamless path from development to validation and volume manufacturing.
Power consumption testing for smartphone energy labeling
Learn about the R&S CMX500 radio communication tester that supports end-to-end testing of all signaling use cases and SmartViser’s viSer test automation application.