Key facts
- Frequency range 5 kHz to 26.5 GHz
- SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz
- DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz
- Lightweight with small footprint
- 40 MHz analysis bandwidth (option)
Key facts
In an RF lab, the FPL family is as indispensable as an oscilloscope or multimeter. It is a single instrument for many measurement tasks. It can be used for spectrum analysis along with highly accurate power measurements for power sensors and analysis of analog and digitally modulated signals.
Quick links
A single instrument for many types of measurements
You can use the FPL for spectral measurements, highly accurate power measurements with power sensors and when analyzing analog and digitally modulated signals.
Low phase noise and low displayed average noise level
Featuring a phase noise of typ. –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of typ. +20 dBm, 1 Hz to 10 MHz resolution bandwidth and typ. –163 dBm displayed average noise level, the FPL is comparable to higher class analyzers. It is ideal for the lab, production and service tasks.
Operation as intuitive as a smartphone
The touchscreen can be used for configuration and performing measurements. A one-finger swipe across the screen adjusts the center frequency or the reference level. A two-finger swipe adjusts the displayed span or level range.
It can be used almost everywhere…
The low weight of 6 kg, optional battery pack for three hours of operation and carrying bag and shoulder harness mean you can use the FPL spectrum analyzer wherever you need it.
Order number 1304.0004.03
Order number 1304.0004.07
Order number 1304.0004.14
Order number 1304.0004.26
Order number 1323.1902.02
OCXO accurate reference frequency
High precision frequency reference
Order number 1323.1883.02
Additional interfaces
Video out, IF out, noise source control, AUX port, connector for R&S®NRP power sensors
Order number 1323.1925.03
Internal generator up to 3 GHz
Order number 1323.1925.07
Internal generator for 7/14/26.5 GHz
Order number 1323.1890.02
GPIB interface
Additional interface for remote control by GPIB, plug-in unit
Order number 1323.1619.02
YIG preselector bypass
Enables full 40 MHz bandwidth analysis in frequencies up to 26.5 GHz
Order number 1353.6660.02
External generator control
Order number 1304.0427.02
Second hard disk (SSD)
(mounted on PC board)
Order number 1323.1719.02
RF preamplifier for 3/7.5 GHz.
Order number 1323.1702.02
RF Preamplifier 14 GHz
Order number 1323.1777.02
RF Amplifier 26.5 GHz
Order number 1323.1990.02
1 dB Steps for electronic attenuator
Order number 1323.1877.02
DC Power supply for 12/24 V supply
Order number 1323.1725.02
Li-Ion battery pack
Order number 1323.1931.02
40 MHz analysis bandwidth
Enables the use of 40 MHz bandwidth for R&S®ZNLx-B1 spectrum analysis option
Order number 1323.1731.02
AM/FM/PM analog modulation analysis
Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(For use in ZNL, ZNLx-B1 is required)
Order number 1323.1754.02
Measurements with R&S®NRP power sensors
Supports R&S®NRP power sensors for power measurements. Requires R&S®ZNLx-B1
Order number 1323.1831.02
Phase noise measurement application
Order number 1323.1783.02
EMI measurement application
Finding, classifying and eliminating electromagnetic interference
Order number 1323.1748.02
Vector signal analysis
The R&S®FPL1-K70 vector signal analysis option is a powerful tool for analyzing individual digitally modulated signals down to the bit level.
Order number 1323.1625.02
Multi-modulation analysis
The R&S®FPL1-K70M multicarrier modulation analysis application (R&S®FPL1-K70 option required) allows DVB‑S2X signals to be analyzed.
Order number 1323.1631.02
BER measurements with PRBS data
The R&S®FPL1-K70P is an extension of the R&S®FPL1-K70 vector signal analysis option that allows the measurement of raw bit error rate (BER) on PRBS data up to PRBS23.
Order number 1345.1011.06
Software
Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud
Order number 1320.7522.06
Vector signal analysis
Order number 1320.7900.06
EUTRA/LTE
Narrowband IoT analysis
Order number 1345.1105.06
Order number 1320.7539.06
Analog modulation analysis (AM/FM/φM)
Modulation analysis for AM/FM/φM modulated single carriers
Order number 1320.7574.06
GSM measurements
GSM/EDGE/ EDGE Evolution
Order number 1320.7868.06
Transient measurements
Transient analysis
Order number 1320.7874.06
Transient chirp measurements
Transient analysis, requires R&S®VSE-K60
Order number 1320.7880.06
Transient hop measurements
Transient analysis, requires R&S®VSE-K60
Order number 1320.7922.06
OFDM signal analysis
Order number 1320.7545.06
EUTRA/LTE FDD uplink and downlink measurement application
LTE signal analysis
Order number 1320.7551.06
EUTRA/LTE advanced and MIMO (downlink)
LTE signal analysis
Order number 1320.7568.06
EUTRA/LTE TDD uplink and downlink measurement application
LTE signal analysis
Order number 1338.8008.18
Smart noise source 10 MHz to 18 GHz
Order number 1338.8008.26
Smart noise source 10 MHz to 26.5 GHz
Order number 1323.1960.02
Protective hard cover
Order number 1323.1977.02
Transport bag, transparent cover
Order number 1323.1683.02
Carrying vest holster
Order number 1323.1677.02
Spare battery pack
Order number 1323.1954.02
Rack mount kit (RAL5014 pigeon blue)
Order number 1323.1954.03
Rack mount kit (RAL5000 violet blue)
Order number 1353.6648.02
D-Sub cable for TTL-synchronization
Widest variety of fully equipped products up to 36% off.
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.