1828 Results
Can I use a NRT power sensor with the NRX via USB port?
Can I use my own antenna/probe set with EMC PreCom
How can I change the display resolution when I use an external monitor?
Cannot use internal display and external monitor together at the same time.
Which settings should I use for the Transform Time Domain mode?
Does ELEKTRA software have possibility to use the Open TEM cell for Radiated Emission?
I want to use the LCX series LCR Meter to automatically control and sort components. One of the tasks is to differentiate between the following three values of resistors: - Less than 990 Ohm, - Middle range from 990 to 1010 Ohm (1 kOhm), - More than 1010 Ohm. How can I set this measurement up and which pins do I have to use at the 15 PIN SUB-D socket at the rear side of the LCX?
Is it possible to use logarithmic frequency axis with the FPC series?
To use the NGPxxx DC power supply from your PC connected via USB - what would be needed?
How can I use the 2nd function to measure DCI and DCV in one setup via remote control?
Disable range checking / use plain SCPI commands with IVI.NET drivers.
ENV216 - how to use with DC-DUTs e.g. @ 12 V or 24 V
Use of the ESW build in Pulse Limiter, if remote controlled by EMC32
Which transducer factor do I have to use for LISN HM6050-2?
28-Mar-2024
Rohde & Schwarz first to show measurements on novel Bluetooth® Channel Sounding signals for positioning accuracyRohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.
05-Jun-2024
Rohde & Schwarz approved by USB-IF for USB 3.2 Gen 1 & Gen 2 transmitter and receiver compliance testingThe USB-IF has approved the USB 3.2 compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices can have full confidence in the accuracy and reliability of the test results produced by the test solution.
A wide 10.1” touchscreen makes the R&S®ZNL vector network analyzer easy to use. A wide 10.1” touchscreen makes the R&S®ZNL vector network analyzer easy to use. Its multi-touch feature lets you conveniently operate the instrument. Simply use the context-sensitive help menu to obtain the information you need to perform your task with ease.
How to use the 'MODE' , 'Logger' with the scope function in the RTH scope rider
Use the external SMB port of the NRPXXS(N) in trigger send mode.
This paper explains how to use the Rohde & Schwarz IVI.NET instrument drivers in a Visual Studio environment.
31-May-2016 | AN-No. 1MA268
21-Dec-2023
Rohde & Schwarz and VIAVI jointly verify Analog Devices’ leading O-RU reference design at i14y Lab PlugFest Fall 2023Rohde & Schwarz and VIAVI Solutions have presented their integrated solution for conformance testing of O-RAN Radio Units at the recent O-RAN ALLIANCE Global PlugFest Fall 2023, hosted at the i14y Lab in Berlin – supported by Deutsche Telekom and EANTC and i14y consortium partners.
23-Jan-2024
Rohde & Schwarz to host Demystifying EMC conference as full day webinar in 2024Rohde & Schwarz hosts its popular industry event, Demystifying EMC, on February 6, 2024. The one-day virtual conference kicks off a program of EMC industry expert sessions.
Use your R&S®MXO 5C SERIES OSCILLOSCOPE for stacking in order to have more space in your lab.
MIMO analysis The RTP oscilloscope can use up to 4 external frontends to acquire the respective IF signals for further analysis. Here we use two FE44S external frontends to test a 5G FR2 signal at 28 GHz. Signal analysis is performed by the R&S VSE software running directly on the RTP oscilloscope.
Join us for an introduction to our work in developing an E2E testbed for XR use cases. E2E testing of XR use cases Join us for an introduction to our work in developing an E2E testbed for XR use cases.
The easy to use and portable R&S®FPL1000 is ideal for your everyday working tasks. video, signal analyzer, FPL The easy to use and portable R&S®FPL1000 is ideal for your everyday working tasks.
Check out the video to learn how to use R&S®PRISMON.cloud and setup your first sensor. Monitoring your OTT streams has never been easier. No matter if you are on the go using your mobile device, at home with your tablet or on-premise on your desktop computer, R&S®PRISMON.cloud is always just a login away. Check out the video to learn how to use R&S®PRISMON.cloud and setup your first sensor.
22-Feb-2024
Rohde & Schwarz and MediaTek to showcase 5G NTN-NR Rel.17 connection at MWC 2024Rohde & Schwarz and MediaTek have teamed up to demonstrate a 5G non-terrestrial network (NTN) new radio (NR) connection based on the latest 3GPP Release 17 specifications at this year's Mobile World Congress in Barcelona.
Nothing happens when I connect a Power Sensor to the FSWP.
Design and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG
15-Feb-2002 | AN-No. 7BM38