765 Results
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.
30-Oct-2019 | AN-No. GFM327
This application note shows how to configure, calibrate and perform conducted EMS measurements according to IEC / EN 61000-4-6 and EMI measurements according to CISPR 16-2-1 with the R&S®EMC32 software tool.
19-Jul-2013 | AN-No. 1MA212
This application note describes the differences in sweep speed between swept spectrum analyzers and modern spectrum analyzers with a wide-band FFT process, and how this improves the measurement speed for general spurious measurement.
10-Jul-2012 | AN-No. 1EF80
Selecting You Next Oscilloscope:
If you are selecting your next oscilloscope and want more insight on how to understand ENOB values measured and published by oscilloscope manufacturers, this document is for you. The effective number of bits (ENOB) is a way of quantifying the quality of analog to digital conversion. A higher ENOB means that voltage levels recorded in analog to digital conversion are more accurate. Understanding oscilloscope vendor-supplied ENOB values can be complex. This document focuses on interpretation of measured ENOB results made on oscilloscopes rather than the math behind ENOB calculations.
21-Jun-2024 | AN-No. 1TD12
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
This application note describes a test scenario tor cable components with an R&S®CLGD Cable Load Generator and an R&S®FSW Signal & Spectrum Analyzer.
24-Jan-2017 | AN-No. 1MA285
Generating and Analyzing 3 GPP Multicarrier Signals with High Dynamic Range
17-Feb-2005 | AN-No. 1MA48
This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results.
17-Oct-2008 | AN-No. 1EF65
This application note describes how to connect and use the highly popular R&S®NRP-Z family of USB SMART power sensors with the Android application.
04-Jun-2013 | AN-No. 1MA215
This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.
21-Oct-2014 | AN-No. 1EF89
Time-of-arrival (ToA) and Time-Alignment-Error (TAE) are important network synchronization measurements to achieve high network quality and performance.This educational note describes how 5G NR is affected by these synchronization requirements.
17-Aug-2021 | AN-No. 8NT05
This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required calibration of the measurement setup and a possible near field to far field transformation when measuring larger devices.
28-May-2018 | AN-No. 1MA304
This application notes introduces two alternative methods how to do the Power Added Efficiency measurement.
22-May-2013 | AN-No. 1EZ64
This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes.
07-Apr-2021 | AN-No. GFM357
Generating Bluetooth RF Test Signals with SMIQ Signal Generator
30-Jan-2001 | AN-No. 1MA31
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S®CBTgo software.
18-Jul-2013 | AN-No. 1MA200
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
This application note is a systematic guide to help test engineers configure the Vector Network Analyzer in order to perform compliance test on Automotive Ethernet cables according to the Open Alliance TC9 standard.
13-Aug-2019 | AN-No. GFM323
This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.
13-Jul-2020 | AN-No. GFM345
Read this educational note and dive into the discussion about the six most important transformer measurements: turns ratio, mutual inductance, phase angle, primary and secondary inductance, leakage inductance, and interwinding capacitance.
28-Feb-2024
This application note introduces the reader to the SpaceX Hyperloop Pod Competition project and their special demands for the electrical drive train.
31-Mar-2021 | AN-No. GFM360
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices.
20-Apr-2022 | AN-No. 1SL383
This Application Note gives 10 useful Tips & Tricks for the users of Rohde & Schwarz attribute-based instrument drivers.
30-Jan-2017 | AN-No. 1MA228
The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz.
15-Nov-2017 | AN-No. 1MA294
This application note provides insights into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. Including an introduction to HIL testing and realtime o
22-Jan-2021 | AN-No. 1GP124
This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured.
28-Apr-2015 | AN-No. 1MA255