Recherche d'actualités
606 Résultats
Feb 28, 2024 | Press Release | Wireless communications
Rohde & Schwarz receives GTI Award 2024 for its 5G RedCap test solutionRohde & Schwarz received the Innovative Breakthrough in Mobile Technology Award at GTI Awards 2024 for its R&S CMX500 radio communication tester’s support of RedCap testing from early R&D to certification and conformance. The GTI Awards takes place during Mobile World Congress and recognizes industry achievements and successes in 5G development across a wide range of market segments.
Nov 07, 2023 | Press Release | Test & measurement
When innovation meets production – Rohde & Schwarz exhibits at productronica 2023Innovation and production – hand in hand. This is the Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Rohde & Schwarz has determined five pivotal areas of interest, each reflecting its commitment to pushing technological boundaries: (1) secure production, (2) efficiency in RF component manufacturing, (3) electronic module and device production testing, (4) calibration and repair services and (5) electronic manufacturing services. In addition, visitors can experience a new T&M highlight at the booth: The R&S MXO 5 is the first eight-channel oscilloscope from Rohde & Schwarz.
Jun 06, 2023 | Press Release | Test & measurement
Automotive Testing Expo Europe 2023: Enabling the next level of ADAS with test & measurement solutions from Rohde & SchwarzAt Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.
Feb 21, 2024 | Press Release | Automotive
Rohde & Schwarz first to test 5G eCall interoperability of Quectel’s 5G module with its wideband radio communication testerQuectel Wireless Solutions, a global IoT solutions provider, and Rohde & Schwarz have successfully validated Quectel’s innovative 5G eCall module, part of the AG56xN series of automotive modules. For the test, the R&S CMX500 wideband radio communication tester has been used. The test setup will be shown at Mobile World Congress 2024.
Sep 05, 2023 | Press Release | Wireless communications
Rohde & Schwarz and Greenerwave collaborate to verify RIS modules and drive 6G researchReconfigurable intelligent surfaces (RIS) are drawing attention in the wireless industry due to their potential for an efficient 5G mmWave rollout as well as future 6G applications. A measurement campaign by Rohde & Schwarz and Greenerwave recently characterized the configurable radio wave reflection properties of a novel FR2 RIS module developed by Greenerwave with an over-the-air (OTA) antenna test system from Rohde & Schwarz. It is one of the first real measurements confirming that a metamaterial-based RIS can improve the coverage and efficiency of wireless communications performance, especially for 5G FR2. The groundbreaking work will pave the way for further 6G developments.
Feb 15, 2024 | Press Release | Broadcast and Media
Rohde & Schwarz supports Berlinale to deliver high-end Digital Cinema Mastering and secure workflowsRohde & Schwarz contributes for its 13th consecutive year to the success of the Berlin International Film Festival, delivering its market-leading R&S®Clipster mastering solution and reliable R&S®SpycerNode production storage.
Aug 03, 2023 | Press Release | Test & measurement
Rohde & Schwarz first to submit 5G Next Generation eCall test cases for GCF approvalRohde & Schwarz is first to submit 5G Next Generation eCall (NGeCall) protocol test cases to the 3GPP Global Certification Forum (GCF). The company is also launching a new 5G NGeCall application option that simulates the public safety answering point (PSAP) functions required for the end-to-end conformance tests that verify the interoperability of the equipment under test for the complete communication exchange. Both additions to the Rohde & Schwarz eCall portfolio now support early testing of new 5G Next Generation eCall systems with the R&S CMX500 one-box tester, contributing to a timely introduction of 5G NGeCall.
Aug 14, 2023 | Press Release | Test & measurement
Rohde & Schwarz sponsors HORYZN and LEVITUM student initiatives with test equipment for drone developmentAs a gold sponsor, Rohde & Schwarz provides test equipment to the HORYZN and LEVITUM student initiatives of the Technical University of Munich (TUM) to help with drone development. The students at TUM are working hard to develop, build and test vertical takeoff and landing drones for various applications.
Jan 04, 2024 | Press Release | Automotive
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
Mar 07, 2024 | Press Release | Test & measurement
Rohde & Schwarz introduces dedicated phase noise analysis and VCO measurements up to 50 GHz with the R&S FSPN50With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.
Dec 06, 2023 | Press Release | Automotive
Applus and Rohde & Schwarz seamlessly integrate eCall testing in EMC test environmentsApplus Laboratories and Rohde & Schwarz have successfully showcased the seamless integration of eCall testing in an electromagnetic compatibility (EMC) test environment. The demonstration illustrated different eCall testing scenarios and capabilities in compliance with the UN ECE R10 standard, which regulates automobile-related EMC.
Feb 06, 2024 | Press Release | Wireless communications
Rohde & Schwarz presents its Wi-Fi 7 multi-channel single-box test solutions for R&D and production at MWC 2024As 5G technology evolves, non-3GPP networks such as public, home and enterprise WLAN hotspots will be more and more interlinked with the 5G core. As a result, tomorrow’s smartphones will rely even more on the next generations of WLAN technology, which will be more powerful and efficient, but also more complex. At Mobile World Congress 2024 in Barcelona, Rohde & Schwarz will be showcasing its latest Wi-Fi 7 test solutions for R&D and production to meet the ever-increasing test challenges posed by the technology and the parallel operation with LTE and 5G cellular standards.
Jan 17, 2024 | Press Release | Wireless communications
Rohde & Schwarz Mobile Test Summit on trends in wireless communications – sessions available online nowThis past November, Rohde & Schwarz hosted the Mobile Test Summit, a platform for industry professionals to share insights on the latest trends in mobile device and infrastructure testing. This year’s event covered a wide range of topics, such as 5G NTN, 5G RedCap, mission critical services, Wi-Fi 7, O-RAN and XR. For those who could not join the live event, Rohde & Schwarz is offering on-demand recordings of all the presentations online.
Oct 31, 2023 | Press Release | Test & measurement
Evolved for more challenges: Rohde & Schwarz adds eight-channel R&S MXO 5 to next-generation oscilloscopesWith the all-new R&S MXO 5, Rohde & Schwarz continues to evolve its series of next-generation oscilloscopes, started with the successful R&S MXO 4 in 2022. The R&S MXO 5 is the company’s first eight-channel oscilloscope. It expands upon the industry-firsts pioneered by the R&S MXO 4 and will empower engineers to tackle even more demanding design challenges.
May 23, 2023 | Press Release | Test & measurement
Rohde & Schwarz signal generators and analyzers approved by Qualcomm for O-RAN compliant 5G RAN platformsThe R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.
May 30, 2023 | Press Release | Wireless communications
Rohde & Schwarz and IEMN collaborate on 6G THz by bringing together electronic and photonic technologiesThe Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.
Aug 21, 2023 | Press Release | Wireless communications
Rohde & Schwarz and MediaTek successfully verify 5G RedCap Rel. 17 connectivity with the R&S CMX500 OBTRohde & Schwarz and MediaTek have partnered to successfully verify MediaTek’s 5G RedCap (reduced capability) test platform, as defined in 3GPP Release 17. RedCap will enable a new range of 5G standalone devices such as industrial sensors for 5G smart factories, logistics, edge-AI and always connected wearables. Rohde & Schwarz has tailored the R&S CMX500 OBT wireless communications tester to support RedCap and other Release 17 features.
Feb 14, 2024 | Press Release | MWC2024
Rohde & Schwarz collaborates with Sony Semiconductor Israel to reach milestones for NTN NB-IoT roll-outTogether, Rohde & Schwarz and Sony Semiconductor Israel (Sony) have achieved the industry’s first 3GPP Rel. 17 NTN NB-IoT RF performance verification. They have also successfully validated PCT-based test cases. Both milestones contribute to the market readiness of NTN NB-IoT technology. At the MWC Barcelona 2024, Rohde & Schwarz will show a live demonstration of NTN NB-IoT testing at the company’s booth with Sony Altair’s NTN Release 17 IoT device.
Sep 12, 2023 | Press Release | Wireless communications
Rohde & Schwarz continues to drive early 6G and sub-THz research with new dedicated W and D band test solutionsTo support pioneering mmWave and sub-THz research, Rohde & Schwarz continues to roll out advanced RF test and measurement solutions. Three additional products tailored to W and D band applications will be showcased at the EuMW 2023 in Berlin: The new R&S SFI100A wideband IF vector signal generator, the R&S NRP170TWG thermal power sensor and the R&S FE110ST/SR TX/RX frontends. All three enable researchers to characterize devices and circuits for beyond 5G and 6G mobile communications as well as the novel sensing and automotive radar applications of tomorrow.
Dec 14, 2023 | Press Release | Mobile network testing
Nokia Drone Networks launch in North America following successful collaboration with Rohde & Schwarz to secure FCC certificationFirst FCC-certified 5G-connected drone-in-a-box solution ushers in benefits of turnkey, operationally efficient, environmentally sustainable technology for U.S. industrial and public sectors. Collaboration utilizes R&S CMX500 radio communication tester from Rohde & Schwarz to proof standards compliance and reliability for mission-critical and business use cases.
Dec 04, 2023 | Press Release | Wireless communications
Rohde & Schwarz is first to deliver a 5G FR1 A-GNSS OTA test solution approved by CTIA CertificationThe R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.
Apr 10, 2024 | Press Release | Broadcast and Media
Rohde & Schwarz launches new era of efficient, sustainable, and smart broadcast transmissionThe R&S®TE1 is the company’s latest and most sustainable transmitter; product debut comes alongside introduction of 24/7 remote monitoring service.
Sep 13, 2023 | Press Release | Automotive
EuMW 2023: Rohde & Schwarz introduces the shortest possible distance simulation for FMCW radarsThe radar test system from Rohde & Schwarz simulates driving scenarios for testing radar based advanced driver assistance systems (ADAS) and radar sensors used in automated driving cars (AD) entirely over the air. Now Rohde & Schwarz introduces new options for the R&S AREG800A automotive radar echo generator and the R&S QAT100 antenna array. The system is able to generate extremely short distances for the artificial objects, and therefore enables realistic autonomous braking tests with the smallest distance possible on the market.
Apr 04, 2024 | Press Release | Test & measurement
Rohde & Schwarz presents new R&S NGC100 power supply series with market-leading functionsThe latest DC power supplies from Rohde & Schwarz for every-day manual use in the laboratory as well as for automated applications offer an extremely wide range of functions for entry level instruments. The R&S NGC100 power supply series includes one, two, and three-channel models supplying up to 32 V, 10 A and 100 W DC power.
Feb 09, 2024 | Press Release | Wireless communications
Rohde & Schwarz drives roll-out of NTN NB-IoT technology with new GCF-certified conformance test casesAt the recent Conformance Agreement Group (CAG) #77 meeting, Rohde & Schwarz has successfully verified the NTN NB-IoT test cases of work item 333 using its R&S CMW500 radio communication tester, allowing the Global Certification Forum (GCF) to activate the work item in their device certification program. Manufacturers of IoT chipsets, modems and end devices as well as test houses can now rely on the proven Rohde & Schwarz solution to bring next-generation IoT devices based on non-terrestrial networks (NTN) to the market, enabling ubiquitous connectivity on land, at sea, and in the air.
Sep 19, 2023 | Press Release | Security
Rohde & Schwarz and Fraport evaluate the world’s first walk-through scanner for passengersFraport began testing the world’s first walk-through security scanner for passengers at Frankfurt Airport. The R&S QPS Walk2000 from Rohde & Schwarz is designed to speed up security checks. The first of these scanners is currently in use in Concourse A of Terminal 1. Passengers simply walk through the scanner at a normal pace without stopping. The test and evaluation phase is set to last up to six months and will provide Fraport and Rohde & Schwarz with important information to help optimize the system.
Jan 23, 2024 | Press Release | EMC testing
Rohde & Schwarz to host Demystifying EMC conference as full day webinar in 2024The popular industry event, Demystifying EMC, is scheduled for February 6, 2024. Hosted by Rohde & Schwarz, this one-day virtual conference kicks off a program of EMC industry expert sessions from Rohde & Schwarz and partners from the commercial and academic worlds. Participants will obtain essential updates on EMC standards and gain insights and practical tips from the live broadcast conference.
Mar 05, 2024 | Press Release | EMC testing
Rohde & Schwarz at EMV 2024: Outstanding T&M solutions from the market leader in EMCAt the EMV show 2024 in Cologne, Rohde & Schwarz showcases a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. The company dedicates a large part of the booth to demonstrations that show EMI compliance testing, EMC test automation, EMS immunity test, EMI debugging and EMF. The Rohde & Schwarz solutions are on display from March 12 to 14, 2024 at the Cologne exhibition center, hall 11.1, booth 106.
Oct 30, 2023 | Press Release | Wireless communications
Enabling an AI-native air interface for 6G: Rohde & Schwarz showcases AI/ML-based neural receiver with optimized modulation at Brooklyn 6G Summit, in collaboration with NVIDIAWith research on the technological components of the future 6G wireless communication standard in full swing, the possibilities of an AI-native air interface for 6G are also being explored. In collaboration with NVIDIA, Rohde & Schwarz takes another step forward and presents an enhancement to its recent hardware-in-the-loop demonstration of a neural receiver, showing the achievable performance gains when using trained ML models compared to traditional signal processing — while for the first time also optimizing the transmitter side.
Jan 31, 2024 | Press Release | Wireless communications
Rohde & Schwarz and VIAVI jointly verify NEC O-RU design at O-RAN Global PlugFest Fall 2023 in JapanAt the recent O-RAN ALLIANCE Global PlugFest Fall 2023 at the Japan Open Testing and Integration Center (OTIC) hosted by Rakuten Mobile, Rohde & Schwarz and VIAVI Solutions have presented their integrated solution for automated conformance testing of O-RAN Radio Units (O-RUs). With their joint test solution, which combines both companies’ industry-leading capabilities, they performed the automated verification of a commercial O-RU provided by NEC according to both O-RAN and 3GPP pre-conformance specifications.