R&S®TSVP Test system versatile platform

Open test platform for high-performance automotive applications

R&S®TSVP Test system versatile platform
Open Lightbox
R&S®TSVP Test system versatile platform
Open Lightbox
R&S®TSVP Test system versatile platform
Open Lightbox
R&S®CompactTSVP Test system versatile platform, Front view R&S®CompactTSVP Test system versatile platform, Back high R&S®CompactTSVP Test system versatile platform, Front view

Key Facts

  • Modular test platform based on PXIe®/PXI® with outstanding enhanced features
  • Perfect for board-level and EoL testing in combination with R&S RF instruments
  • Internal signal routing via R&S analog measurement bus
  • Instrument soft panel for each module
  • All software drivers and additional tools are already included

Brief description

The R&S®TSVP family of products is an open test platform from Rohde & Schwarz ideal for high performance automated test equipment (ATE) applications. The chassis contains a mechanical frame, digital backplane, analog backplane, mains switching and filtering, power supply and diagnostic extensions. A highlight is the analog bus for routing measurement signals between different slots without additional external wiring. Three device variants are available:

  • R&S®ExpressTSVP based on cPCIe/PXIe bus for test and measurement tasks that require a flexible use of third-party PXIe modules
  • R&S®CompactTSVP based on cPCI/PXI bus for general test and measurement tasks
  • R&S®PowerTSVP based on CAN bus for dedicated high-power or switching applications
Larger ATE systems can be created by combining the R&S®ExpressTSVP or R&S®CompactTSVP with R&S®PowerTSVP. Various measurement modules for industrial use in R&D and manufacturing are available. Thanks to a powerful embedded computer, an entire test bench within a single box can easily be realized. High reusability for different types of applications an all kind of electrical test gates along the value stream in a modern manufacturing organization is ensured by the modular and scalable platform approach.

Caractéristiques & avantages

The trend is towards economical platforms suitable for industry

There is a heightened interest in testing organizations to configure the required functions in most compact units as versatile as possible so that current and future requirements can be covered without any need for large additional investments. Moreover, constantly reduced product development times call for powerful, easy-to-operate and standardized software components which can be integrated as reusable modules in a multitude of applications. The R&S®TSVP is more than a mass production tester. Test engineers can use the instrument throughout the entire development phase, from engineering validation tests (EVT), design validation tests (DVT) and production validation tests (PVT) to mass production (MP). Current development and production lines for wireless devices must provide an optimum combination of flexibility, performance and capacity utilization. As the leading supplier of T&M equipment for all stages in the development and manufacturing of a brought bunch of applications, Rohde & Schwarz meets these stringent requirements with the R&S®TSVP.

Compact and expandable System approach

  • State of the art R&S®TSVP models with up to 18 module slots.
  • Compact 19-inch 4 height units rackmount enclosure.
  • Outstanding scalability for high-pin-count and high-current ATE applications with up to 990 channels in one chassis and 2430 channels by extending with a second chassis.
  • Versatile control concept, either by a powerful embedded computer or alternatively by a remote-control interface together with an external industrial PC (IPC).
  • Sophisticated analog measurement bus for internal measurement signal routing dynamically under program control.
  • Floating analog and digital instrumentation ensure reliable high signal quality and prevents from humming loops.
  • Rear-I/O concept allows feed in external signals from the rear through the instrumentation forward to the front connectors.
  • Mass interconnect interface solution without derating of the instrument specifications typically caused by otherwise needed signal wiring.
  • In-system self-test and calibration supports high degree of utilization typically required within 24/7 factories.

Powerful modules portfolio

  • Embedded computer or remote control interface
  • Multimeter and in-circuit test extension modules.
  • Signal routing modules from 90 channel 1 A up to 4 channel 50 A with integrated current measurement features.
  • Digital I/O modules, from 10 channels up 64 channels, statically and dynamically up to 200 MS/s and 2 Msamples on-board memory.
  • Analog waveform generation (floating) from 2 channels up to 16 channels, high level with ±20 V / up to 250 mA or ±27 V / up to 100 mA.
  • Analog waveform acquisition from 8 channel up to 16 channels in parallel, high level with up to ±27 V or up to ±120 V.
  • Power supply with 2 channels ±50 V / ±3 A / 50 W / 10 kS/s (floating)

Module design

The form factor of the R&S®TSVP modules reflects the consistent product philosophy of meeting cross-section requirements in electronics production. Each instrument allows the primary switching of incoming signals via the front connector plus free access to the internal analog measurement bus. If only a few signals need to be multiplexed for testing a DUT, the multiplexer on the measurement module is often sufficient. If, however, a large number of channels needs to be handled, multiplexing is carried out via the analog measurement bus and switch matrix modules. As a result, module connection is flexible, which is high valued in practice and fixture cabling for these dedicated measurement tasks is simplified. The rear-I/O measurement signal routing concept allows connecting external instrumentation to feed in or out signals from the rear through switching modules forward to the front connectors and at least to the device under test (DUT). Furthermore the signals from the external instrumentation gets access to the R&S analog measurement bus and can be routed system internally to other R&S instruments for further measurement tasks.

Internal signal routing concept

As an extension for industrial use in typical automatic test equipment (ATE) environments, an additional backplane for the analog measurement bus has been integrated; it can be utilized for flexible test signal routing in the chassis between the modules without requiring any additional external cables. The signal routing of partially high-impedance analog signals or signals with very small levels must be kept at a physical distance from the “digital data highway”, the PCI bus. The same applies to higher voltages. For this purpose, the format of the modules was expanded by an interface for the analog measurement bus. During the measurements the cross-connection of the signals from module to module is generated temporarily via coupling relays to the analog measurement bus dynamically under program control.

  • The analog measurement bus offers short and high-quality signal routing in-between the measurement modules inside the chassis without the needing of external wiring.
  • Eight lines of the system-wide analog measurement bus, each with 120 V / 1A max., are available at the most of the peripheral slots. They are used for dynamically interconnect DUT signals routed via switching modules and various measurement or stimulus modules that have access to the analog measurement bus.
  • Reduced interferences and ensured high-reproducible measurements inherent by the given concept.
  • The analog bus is located directly above the front connector area where space is provided for on-board signal conditioning and signal routing using coupling relays for the analog bus.
  • 3rd party modules can also benefit from this concept system internally by using additional instrument lines and a dedicated connector located at the analog bus backplane.

High-current switching and measurement modules

  • Most of the available power switching modules are specified as a combination of switching paths for sense- and force-signals.
  • Free selection of the ampacity of the switching paths by either 12x 16 A or 8x 30 A or 4x 50 A, always combined with the appropriate amount of 2 A sense-paths.
  • All switching paths are equipped either with a shunt-resistor or a current to voltage transducer, depending on the ampacity of the force-signal path. They have access to the local and to the global R&S analog measurement bus thanks to the bus coupling relays. The switching paths are calibrated and the correction values can be read from the remanent memory of each module.
  • Current measurement are possible within 20 ranges from nA up to 50 A with high accuracy and without any signal interruption.
  • The achievable current measurement accuracy is typically ±1 % from the value and +0.2 % from the range.
  • In the range below 1 A with a direct current measurement with R&S®TS-PSAM analog source and measurement by selecting the appropriate current range.
  • Above 1 A indirectly by a voltage measurement either by measuring the voltage drop over the shunt-resistor or by measuring the output voltage of the current to voltage transducer.

unique Mass interconnect interface solution

  • The interface between the test platform and the Unit Under Test (UUT) is one of the most important parts of each test system in respect to reliability, flexibility and modularity.
  • The well adapted pull-thru mass interconnection interface solution direct flanged to the front of the R&S®TSVP chassis ensures easy access to the instrumentation for service and maintenance.
  • No derating of instruments technical data due to direct connection of the signal modules to the front connectors of the instrumentation without additional internal wiring.
  • High scalability by supporting of three product variants with G20, G20x and G40x from 20 slots up to 40 slots + 10 eXtension slots.
  • Allows custom made and cost optimized configurations for all kind of applications from DC over high-power to RF.

Comprehensive software and tools

For convenient test program development, a comprehensive library is available, referred to as a Generic Test Software Library (R&S®GTSL); it features ready to go and fully tested software modules for functional tests, based on the Interchangeable Virtual Instruments (IVI) industrial standard. It includes the entire resource management and the configuration of the modules used in the system, DUT switching as well as all measurement and stimulus functions of the R&S modules. The R&S®GTSL allows fast and reliable implementation of test cases and their adaption to changing requirements. Instrument Soft Panels allowing a quick start with operation of a R&S®TSVP and easy configuration of each individual module while debugging and evaluation tasks. R&S®GTSL Debug Driver Server and Debug Panels are very helpful while implementation and troubleshooting tasks and can be performed in parallel with a running test application respectively a test executive sequencing solution. The panels are showing the current status of the most R&S modules while runtime. The Signal Routing Library as a part of the R&S®GTSL as an outstanding example of the high-level library makes it possible to set up complex switched connections by means of switching commands. Switched connections can be automatically routed by the analog measurement bus, i.e. the software searches for free analog measurement bus lines and automatically switches the relays in the switching path based on easily readable logical names. Extensive switched connections can also be saved under an application-specific name and then called in the test program. As an extraordinary feature, the signal routing library supports multi-panel and parallel testing by a sophisticated bench concept.

Available options

Modular instrument chassis
Produit
Désignation
Désignation

Universal test and measurement chassis

Désignation

Industrial test and measurement chassis

Désignation

Industrial high-power and switching application chassis

System controllers
Produit
Désignation
Désignation

System controller for R&S®CompactTSVP

Désignation

PCIe bridge for R&S®CompactTSVP

Désignation

System controller for R&S®ExpressTSVP
 

Désignation

Remote controller for R&S®ExpressTSVP
 

Digital multimeter (DMM) and In-circuit test
Produit
Désignation
Désignation

Scanning multimeter and data acquisition unit

Désignation

In-Circuit Test (ICT) extension module

Signal routing and switching
Produit
Désignation
Désignation

Switch matrix module

Désignation

Power switching module

Désignation

Multiplex/switch module

Désignation

High-power switching module

Désignation

Power switching module

Désignation

High-power switching module

Communication and digital I/O
Produit
Désignation
Désignation

Analog and digital I/O module

Désignation

Digital I/O module and coil driver

Désignation

Digital functional test module

Désignation

Digital LVDS functional test module

Arbitrary signal generator
Produit
Désignation
Désignation

Function generator module

Signal analyzer
Produit
Désignation
Désignation

Signal analyzer module

Power supplies
Produit
Désignation
Désignation

Power supply/load module

In-System calibration kit
Produit
Désignation
Désignation

In-System calibration kit

Accessories
Produit
Désignation
Désignation

Signal port and transmission module

Désignation

Switching extension module

Désignation

Backplane extension module

Désignation

Signal transmission module

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

Marketing de permission

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.
Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.