PAM-N Analysis with the R&S RTP Oscilloscope (Part 1)

Signal Configuration

The PAM-N Analysis option enables the measurements and detailed characterization of PAM signals (PAM order of 2-8) with the R&S RTP and RTO oscilloscopes. Get started with the PAM signal configuration and benefit from predefined settings for technology standards such as Ethernet or Automotive Ethernet.

Related solutions

Electronic design

Electronic design

Vidéo associée

PAM-N Analysis with the R&S RTP Oscilloscope (Part 2)

Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.

Oscilloscopes

PAM-N Analysis with the R&S RTP Oscilloscope (Part 3)

Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.

Oscilloscopes

RTP Oscilloscopes with External Frontends (Part 1)

The R&S FE External Frontends extend the frequency range of the RTP Oscilloscope up to 170 GHz. No additional equipment is needed for this compact and fully calibrated solution. Learn how easy it is to configure a external frontend directly by the RTP GUI.

Oscilloscopes

RTP Oscilloscopes with External Frontends (Part 2 )

The R&S RTP oscilloscope offers a comprehensive set of tools for analysing widebad RF signals together with the external frontends downconverted. Start with powerful trigger events, responsive spectrum analysis or the unique IQ mode to prepare in depth signal analysis. .

Oscilloscopes

RTP Oscilloscopes with External Frontends (Part 4 )

The RTP oscilloscope can use up to 4 external frontends to acquire the respective IF signals for further analysis. Here we use two FE44S external frontends to test a 5G FR2 signal at 28 GHz. Signal analysis is performed by the R&S VSE software running directly on the RTP oscilloscope.

Oscilloscopes

RTP Oscilloscopes with External Frontends (Part 5 )

Use the R&S RTP Oscilloscope with the R&S External Frontend FE110SR to debug your automotive radar devices. This example demonstrates the analysis of a bursted radar chirp signal with the FFT and Spectrogram. Analysis with the R&S VSE software and the Transient option enhances the characterization of radar signals. Additionally, the acquisition of two FE110SR signals with a maximum bandwith of 10 GHz in a frequency range of 70 to 110 GHz is possible the RTP oscilloscope.

Oscilloscopes

Embedding & Equalization with the R&S RTP Oscilloscope (Part 3)

The Eye Diagram is an effective tool to validate signal integrity. This video compares the eye diagram on a signal acquired at the output of a USB transmitter versus a waveform with some added cable emulation.

Oscilloscopes

Embedding & Equalization with the R&S RTP Oscilloscope (Part 4)

Learn how easy it is to configure a equalizer emulation within the Equalizer setup dialog. For interface standards such as USB, PCIe or DP, the necessary S-parameter files are included in the oscilloscope software.

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

M.

Mme

Aucune information

Prénom

Nom

Courrier électronique

Entreprise

Pays

Téléphone (ex : +1 400 123 5678)

Code postal

Ville

Demande d'informations

Email confirmation (optional)

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.

An error is occurred, please try it again later.