767 Results
Dashboard providing an overview over available power supplies and meters, and over installed application programs
13-Sep-2024 | AN-No. 1GP140
This application note provides an application program and instructions for performing speech quality tests and delay measurements in a live network, using the R&S®UPV audio analyzer.
14-Dec-2017 | AN-No. 1GA68
This application note explains the basics behind these properties and offers an application program for their measurement.
10-Jul-2012 | AN-No. 1GA61
This application note provides a tool which generates a voltage or current sweep using the arbitrary function of the instruments. A fast log captures voltage and current values during the sweep.
15-Feb-2021 | AN-No. 1GP129
This application note provides an application program for level alignment, test automation and reporting with PESQ, POLQA and delay measurements on the Audio Analyzer R&S®UPV or R&S®UPV66.
08-May-2013 | AN-No. 1GA62
This application note provides an application program for the audio analyzer R&S®UPV which calculates and displays the loudness of non-stationary sounds according to ISO 532-1 (Zwicker method).
14-Dec-2017 | AN-No. 1GA67
This application note proposes a digital level shifter for connecting the I2S interfaces R&S®UPP-B2 and R&S®UPV-B41 to devices under test with a logic voltage different from 3.3 V.
27-Mar-2020 | AN-No. 1GA71
This application note provides software and instructions for a simple check of the acoustic performance of mobile phones. A focus is set on short test times and ease of use, without compromising accuracy and repeatability of results.
14-Dec-2017 | AN-No. 1GA69
This application note applies to DC power supplies R&S®NGL200, R&S®NGM200, R&S®NGP800, R&S®NGU201 and R&S®NGU401, as well as LCR meters R&S®LCX100 and R&S®LCX200.
19-May-2022 | AN-No. 1GP135
The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.
05-Sep-2014 | AN-No. 1GA66
Harmonic Distortion Measurements in the Presence of Noise
06-Jul-2011 | AN-No. 1GA55
This application note is about creating your own battery model for the R&S®NGM200 or R&S®NGU201, beyond the standard models provided within the battery simulation option NGM-K106.
26-Jul-2023 | AN-No. 1GP128
Useful tips and tricks for your first measurement experience
Resistors, capacitors and inductors are the most basic components in electric circuits. It must be ensured that they work properly and accurately. Therefore, they need to be tested thoroughly during circuit design. This is usually done using LCR meters, which have become indispensable in the lab and in production. This application note looks at how to perform basic capacitor and inductor measurements accurately and reliably.
22-Feb-2024 | AN-No. 1GP142
Batteries are used in a variety of applications, and their quality can be affected by cycling. This tool provides an easy way to determine battery performance over time.
17-Dec-2021 | AN-No. 1GP130
Recording Measurement Results over Time with Audio Analyzer R&S<sup>®</sup> UPV
29-Jun-2012 | AN-No. 1GA59
Swept Harmonic Distortion Measurements
16-Jul-2011 | AN-No. 1GA56
Printing Tool for Audio Analyzer R&S UPV
18-Jul-2011 | AN-No. 1GA57
Psychoacoustic Audio Quality Measurements Using R&S<sup>®</sup>UPV Audio Analyzer
03-Apr-2009 | AN-No. 1GA49
Using Application Programs for Audio Analyzer R&S<sup>®</sup> UPV in Remote Control
30-Jun-2012 | AN-No. 1GA60
This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.
15-Jun-2020 | AN-No. 1GP126
This application note describes the measurement challenges of 5G NR and makes clear the benefits of using a monitoring receiver for measuring 5G signals.
07-Jun-2021 | AN-No. 1SL366
This application note presents setting examples for all basic audio measurements to be performed immediately, using the R&S®UPP and R&S®UPV audio analyzers. For each setup, information is given on the type of measurement, the underlying standards, and on how to modify the graphic display results.
07-Jul-2014 | AN-No. 1GA64
The combination of R&S® CMU200 and R&S® UPV is in use for various tests of mobile phone speech functionality, such as acoustic tests according to 3GPP 26.132. This application note explains how to replace the R&S® CMU200 in these tasks with R&S® CMW500.
25-Jul-2014 | AN-No. 1GA65
Measurement of Maximum Sound Pressure Level of Headphones according to EN50332
17-Jun-2009 | AN-No. 1GA48
The LCR meters R&S®LCX100 and R&S®LCX200 precisely measure the complex impedance and the resulting components values over a wide frequency range.
14-Mar-2022 | AN-No. 1GP132
Calculation tool to determine the measurement accuracy of LCX100 and LCX200.
11-May-2023 | AN-No. 1GP138
Using R&S audio analyzers in remote control applications to replace the Agilent 8903B
24-Nov-2010 | AN-No. 1GA54
Calibrating Measuring Microphones and Sound Sources for Acoustic Measurements with Audio Analyzer R&S<sup>®</sup> UPV
11-Oct-2012 | AN-No. 1GA47
Measurement of Play-only devices like MP3 Players with R&S Audio Analyzer UPV
28-Jun-2007 | AN-No. 1GA46
remote control user interface for multiple DC power supplies
27-Aug-2020 | AN-No. 1GP127