8303 Results
This document provides: - A description of how oscilloscope acquisition memory is defined - Insight into the relationship between memory and other oscilloscope parameters - Examples where deep memory provides value
R&S®LCX LCR Meter | Misuratore LCR - Data Sheet Brochures and Data Sheets Datasheet
R&S®VidChecker Audio/Video QC Software - Product Brochure
R&S®NGE100B versus GW GPS-3303 - Comparison Sheet Brochures and Data Sheets
Increasing public safety and privacy through proven counter drone and cellular network analysis solutions.
Models: R&S®ZNBT8, R&S®ZNBT20, R&S®ZNBT26, R&S®ZNBT40
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
Converting Existing Waveform Files from R&S AMIQ or Binary into R&S SMU200A or R&S AFQ100A Format
18-Jun-2009 | AN-No. 1GP64
Fast Scalar Network Analysis Using a Signal Generator and a Power Meter
14-Jul-2006 | AN-No. 1MA101
This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks.
25-Nov-2016 | AN-No. 1MA263
Cell search and cell selection in UMTS LTE
17-Sep-2009 | AN-No. 1MA150
The R&S®FSQ signal analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.
17-Jan-2017
Guidelines for MIMO Test Setups – Part 2
14-Oct-2009 | AN-No. 1GP51
This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
Reliable testing of HARQ feedback and UL timing adjustment on LTE eNBs with the R&S®SMW200A simplifies eNB performance testing and eliminates the need for test UEs
01-Jun-2016
This application note and associated application software may be used to conduct psychoacoustic speech quality evaluation for Voice over LTE (VoLTE) connections. The measurements are based on recommendations ITU-T P.862 and ITU-T P.863. The included software sequence performs decoder/encoder calibration, connection setup for the UE under test and subsequent speech quality analysis.
21-Feb-2014 | AN-No. 1MA204
RF chipset verification for UMTS LTE (FDD) with R&S<sup>®</sup>SMU200A and R&S<sup>®</sup>FSQ
19-Dec-2008 | AN-No. 1MA138
This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.
24-Feb-2016 | AN-No. 1GP97
Generating the Noise Field for Ambient Noise Rejection Tests
12-Oct-2010 | AN-No. 1GA51
This application note describes the configuration of a Miracast wireless video transmission system and how to measure delay times.
01-Oct-2015 | AN-No. 1MA250
This document provides some technical background and guidance on how to optimize the measurement of one of the key performance parameters of WLAN transmitters - the Error Vector Magnitude (EVM).
This application note provides some technical background on how to optimize the measurement of one of the key performance parametersof 802.11be WLAN transmitters.
06-Sep-2022 | AN-No. 1EF114
Integrated end-to-end data solution with IP traffic analysis and protocol statistics allows detailed analysis of data traffic generated by IoT and mobile devices.
06-Jun-2017
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
In the satellite sector, components, subsystems and entire satellites must be qualified in a thermal vacuum chamber before they can be used in space. This qualification proves that equipment can not only survive but also function in the harsh conditions encountered during launch and in space.
05-Oct-2022
This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.
09-Oct-2014 | AN-No. 1MA143
This application notes describes remote operation or monitoring of the spectrum analyzers R&S® FSL3, R&S® FSL6, R&S® FSL18 through a standard web browser.
07-Jan-2009 | AN-No. 1EF66
This document describes the critical parameters and provides step-by-step procedures for the configuration.
08-Dec-2015 | AN-No. 1C106
The amendment 802.11ad to the WLAN standard defines the MAC and PHY layers for very high throughput (VHT) in the 60 GHz range. This application note provides a brief examination of key 802.11ad parameters, describes the required measurements and test setups and contains several important recommendations for over-the-air (OTA) measurements.
17-May-2017 | AN-No. 1MA260