8293 Results
GPIBShot - Taking Screenshots via IEEE Bus
28-Aug-2009 | AN-No. 1MA25
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
The R&S®ZNL is able to characterize a broad range of impedances with the lowest uncertainty among its competitors in the same class.
02-Oct-2019
This document provides information on the techniques used to calibrate the FSMR3000 signal source. It also describes the process used to remove measurement uncertainties.
31-Dec-2021 | AN-No. 1SL377
This application note describes a measurement-based development methodology by which the Doherty Amplifier may be enhanced.
26-Sep-2016 | AN-No. 1MA279
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
Verifying RF ports is crucial for minimizing lost power and maximizing battery life. The R&S®FPC1500 is an easy-to-use and costeffective tool for this type of verification.
05-Mar-2020
This application note explains how to generate phase coherent signals with a compact easy-to-use solution.
07-Sep-2016 | AN-No. 1GP108
Define the exact current profile to minimize your electronics device´s power consumption with the R&S®NGM200 power supply series.
10-Dec-2020
Obtain fast data reading for realtime filter tuning with the R&S®ZNB vector network analyzer from Rohde & Schwarz.
27-Nov-2019
This document describes the unique application of Rohde & Schwarz VNA to fully characterize the passive part of multi-element antennas.
20-Mar-2017 | AN-No. 1MA278
This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.
16-Jun-2020
The R&S®RTH-K38 user scripting software option makes the R&S®ScopeRider RTH handheld oscilloscope a powerful tool for maintenance and service applications.
06-May-2020
Use R&S®RTP high-performance oscilloscopes and the R&S®VSE-K6A phased array measurement option for analyzing deceptive jamming techniques and automating jamer testing.
12-Jul-2021
The R&S®RTP and R&S®RTO2000 oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.
31-Mar-2021
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
This Application Note provides guidance on using the “Intermodulation Wizard” through an example measurement.
27-Mar-2013 | AN-No. 1EZ63
This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.
08-Dec-2021 | AN-No. 1SL375
This application note describes methods using an R&S®ZVA network analyzer to accurately measure all the key parameters of frequency converters.
30-Apr-2015 | AN-No. 1MA224
The R&S®RTO digital oscilloscope analyzes RF pulses up to the maximum bandwidth of the instrument used.
09-Nov-2017
Noise Figure Measurement without a Noise Source on a Vector Network Analyzer
27-Oct-2010 | AN-No. 1EZ61
It is recommended to use jitter measurement instruments for both the time and frequency domain in order to differentiate between fast and slow moving artifacts.
22-Aug-2017
Testing S-Parameters on Pulsed Radar Power Amplifier Modules
11-Apr-2013 | AN-No. 1MA126
Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.
10-Aug-2020
The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices.
20-Apr-2022 | AN-No. 1SL383
The R&S RTO / R&S RTE digital oscilloscope is a valuable tool for analyzing EMI problems in electronic designs. High input sensitivity, high dynamic range and a powerful FFT implementation are key features for capturing and analyzing unwanted emissions
26-Feb-2015
This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes and direct attach copper cables (DAC).
07-Apr-2021 | AN-No. GFM356