1817 Results
Automatic DAB Receiver Test - Test of Re-Synchronisation Capability
11-Nov-2005 | AN-No. FTK04
16-Dec-2021
Automotive Radar Test System from Rohde & Schwarz named Test Product of the Year at the Elektra AwardsRohde & Schwarz today announced that its R&S RTS Radar Test System was named Test Product of the Year at the Elektra Awards 2021 organised by Electronics Weekly. The prestigious industry prize was presented at a Gala Dinner at the Grosvenor House Hotel, United Kingdom.
15-Jul-2020
Rohde & Schwarz and TSN Systems provide nanosecond-precision latency measurements for automotive EthernetWith radar, lidar and camera sensors present in automobiles, time sensitivity on networks becomes extremely important, as vast amounts of sensor data need to be transferred and processed within a few milliseconds. Test and measurement expert Rohde & Schwarz and time-sensitive networks specialist, TSN Systems have successfully cooperated on precise timing measurements for in-vehicle networks using automotive Ethernet 100BASE-T1.
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
Rohde & Schwarz instrument security manual for the R&S®NGP800 power supply series be used in a secured environment.
Rohde & Schwarz Installation Manual for software options of the R&S®OSP Open Switch and Control Platform
Unfortunately I can control my NRP-Z sensor only from the VisaTester but not from my Python IDE when using the same Device Identifier "USB::0x0aad::0x0023::102800::INSTR". What is wrong?
Using the flags in the ED-137 voice stream, R&S®AVQA non-intrusively analyzes the RSSI level. Based on the squelch information, R&S®AVQA automatically differs between the signal and noise and reports this accordingly. The RSSI monitor in R&S®AVQA provides a great opportunity for long-term signal and noise monitoring of the radio infrastructure.
Using state-of-the-art software-defined networking technology, provision of an integrated network is radically simplified and accelerated, because manual configuration of individual devices is no longer necessary. Wifi 6E, 6GHZ WLAN, Central Management & Monitoring Platform to orchestrate the entire Network Infrastructure based on Software-defined technology.
Testing Predefined 5G NR Signals | Rohde & Schwarz Generate and analyze predefined 5G NR signals to test basestation transmitters or to characterize components like power amplifiers using the SMW200A and FSW
This video shows the basic operating steps for operating R&S®AdVISE under the control of R&S®ELEKTRA. R&S®AdVISE visual inspection software automates the process of visually monitoring equipment under test (EUT) during a test sequence. This eliminates human inattention, ensures reproducible results and simplifies the test documentation. A typical application is EMS testing with R&S®EMC32 or R&S®ELEKTRA
Explore how the R&S®NGU power supply can be used to simulate and test battery performance, enhancing the reliability and efficiency of your devices. Ideal for engineers and tech enthusiasts, this episode provides a clear path to mastering battery simulations with practical tips and real-world applications.
Measuring Color-Reproduction Quality on TVs and Monitors
13-Aug-2010 | AN-No. 7BM78
DFS Analysis Tool, Dynamic Frequency Selection in the 5 GHz Band
30-Mar-2007 | AN-No. 1EF59
This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 oscilloscope.
24-Apr-2013 | AN-No. 1EF86
Generation and Analysis of RFID Signals According to ISO 15693
17-May-2006 | AN-No. RSI01
(E)GPRS Measurements with R&S CMU200 and CMUgo
07-Sep-2004 | AN-No. 1CM52
21-Dec-2021
Rohde & Schwarz supports China Mobile with 5G VoNR audio quality testAs of October 1, 2021, China Mobile requires all 5G enabled mobile phones to support voice services over 5G NR (VoNR). Accordingly, the network operator has announced corresponding audio quality test cases. China Mobile relies on the R&S CMX500 radio communication tester from Rohde & Schwarz for 5G VoNR test verification, and the first acceptance tests have already been performed.
24-Feb-2022
Rohde & Schwarz validates first 5G RRM FR2 2xAoA conformance tests with the R&S TS-RRM-NR test systemThe PTCRB certification organization has approved the first radio ressource management (RRM) conformance test cases for FR2 with two angles of arrival (2xAoA), using the R&S TS-RRM-NR 5G RRM conformance test system from Rohde & Schwarz. The test cases have been validated in multiple FR2 EN-DC band combinations, using the new R&S ATS1800M CATR based multi-AoA anechoic chamber.
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
The R&S FSW signal and spectrum analyzer is used to demodulate and analyze the measured signal performance for possible interference.
The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM, FM and PM modulated analog signals. The R&S®FPL1-K7 is ideal for troubleshooting AM and FM transmitters, for transient and settling measurements of oscillators and for simple chirp analysis of pulsed or continuous wave signals. The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM,
Group delay measurements made fast and easy with the R&S®FSW and R&S®SMW The R&S®FSW spectrum analyzer and R&S®SMW200A signal generators can be used to measure absolute and relative group delay (GD) on satellite transponders, frequency converters and other components.
This video shows how to measure noise figure and gain of an amplifier at around 90 GHz using the smart noise source R&S FS-SNS110 and the external frontend R&S FE110SR in combination with a spectrum analyzer. Noise Figure and Gain Measurements of amplifiers from 75 GHz to 110 GHz
It will be used for the first 5G networks and operates 5G on top of an existing LTE network. This dual connectivity requires thorough testing. The R&S CMX500 radio communication tester is able to measure 5G NR and LTE in parallel.
This video demonstrates a power vs. frequency sweep while measuring error vector magnitude (EVM), crest factor, adjacent channel leakage power ratio (ACLR) and other relevant parameters using the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer from Rohde & Schwarz.
It can be used with different software’s (Qualcomms QSPR, R&S®VSE, R&S®WMT) and gives comparable results through the different device development and production stages. This video showcases a test procedure with the R&S tool R&S®WMT. The R&S®CMP200 provides the perfect platform to develop and produce FR2 Small Cell devices.
Balanced Reflection Measurement with R&S ZVL
14-Feb-2008 | AN-No. RSI05
Impulsive Noise EMC Measurements on Set Top Boxes
07-Jul-2003 | AN-No. 7BM45
EMI Debugging with the R&S RTO and R&S RTE Oscilloscopes
25-Jun-2014 | AN-No. 1TD05