456 Results
The R&S®TS7124 RF shielded box together with the multiport R&S®CMW100 communication manufacturing test set leads to extremely fast non-signaling measurements.
ANSI/SCTE 40 Conformance Testing Using the R&S SFU, R&S SFE and R&S SFE100
29-Oct-2009 | AN-No. 7BM68
It also has a precise positioner, able set a known angle between the broadcast antenna and the device under test, in this case the NXP NCJ29D5.
Rohde & Schwarz Quick Start Guide for the Compact TSVP Industrial Test and Measurement Chassis R&S®TSVP TS-PCA3.
R&S®EPL1000 Getting Started manual; provides the information needed to set up and start working with the instrument. Basic operations and handling are described. Safety information is also included.
Rohde & Schwarz Getting Started manual for the R&S®UD1065 Up- / Downconverter; provides the information needed to set up and start working with the instrument. Safety information is also included.
We have installed our test system with EMC32 and all devices, but NRP2 can not be set to physical from EMC32 using LAN interface.
Rohde & Schwarz manual for the R&S®TSMA6B-BP Battery Pack Unit.
R&S®FPC-Z10 getting started manual; provides the information needed to set up and start working with the teaching kit. Basic operations and handling are described. Safety information is also included.
Learn how to set up the DTM interface to the device under test and how to set up and perform TX and RX measurements using the multi evaluation mode. Video, Application video, Product video CMW500, CMW Platform, CMW270, CMW290, Bluetooth, Low Energy, Bluetooth LE measurement This video shows how to measure Bluetooth Low Energy (LE) devices with the R&S®CMW test platform
I tried to change the working directory on my FPC series analyzer without success. It stays to "\Public" all the time. Can you explain how to set the desired directory?
Signal Analysis with VSE software The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis. This video demonstrates how easy the VSE software can analyze a 5G FR2 signal that was captured and downconverted by the FE44S external frontend and acquired by the RTP oscilloscope. The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis.
For A/V devices such as smartphones, tablet PCs, Blu-ray players, set-top boxes and TV sets, the perceived video quality must satisfy very high standards. A/V devices need to hold their own in three main areas: ı Stability (environmental influences, response to source signal disturbances, etc.) ı Performance (switching times, delays) ı Compliance with standards (input and output formats) Any deviations from the expected video and audio output can be automatically and precisely detected with R&S A/V distortion analysis on all common analog and digital interfaces such as HDMI™ and MHL™. This document examines the relevant setups and configurations.
15-Oct-2014 | AN-No. 7BM87
R&S®FSH quick start manual; provides the information needed to set up and start working with the instrument. Basic operations and handling are described. Safety information is also included.
Rohde & Schwarz quick start manual for the R&S®FSH3-TV analyzer. The universal combined TV and spectrum analyzer from 100 kHz to 3 GHz.
Testing Network Registering for GSM/IS136 Multi-mode Mobile Phones
07-Mar-2003 | AN-No. 1CM31
It includes a comprehensive feature set for application testing, which forms the basis for Extended Reality (XR) testing. The R&S®CMX500 radio communication tester is suitable for all signaling use cases through all stages of 5G device production. It includes a comprehensive feature set for application testing, which forms the basis for Extended Reality (XR) testing.
MCMF capabilities, on-the-fly changes and monitoring features In this third video of R&S’s new video series on high-end GNSS testing, it is shown how to set up a multi-constellation, multi-frequency GNSS scenario and feed the GNSS signals to a connected GNSS receiver. MCMF capabilities, on-the-fly changes and monitoring features.
Generate multiple signals aligned in amplitude, delay and phase This video shows how to set up R&S®SMW200A vector signal generators and use the RF Ports Alignment option SMW-K545 together with the RFPAL PC software to generate multiple signals that are aligned in amplitude, delay and phase at the input of a multi-port DUT.
The R&S®RTH-K38 user scripting software option makes the R&S®ScopeRider RTH handheld oscilloscope a powerful tool for maintenance and service applications.
06-May-2020
Rohde & Schwarz user manual for the R&S®TSMA6B autonomous mobile network scanner
23-Jan-2024
Rohde & Schwarz to host Demystifying EMC conference as full day webinar in 2024Rohde & Schwarz hosts its popular industry event, Demystifying EMC, on February 6, 2024. The one-day virtual conference kicks off a program of EMC industry expert sessions.
03-Jul-2023
Rohde & Schwarz and MediaTek verify industry's first 3GPP Rel. 17 NTN NB-IoT protocol conformance test casesRohde & Schwarz has partnered with MediaTek to verify the first NTN NB-IoT protocol conformance test cases in line with 3GPP Rel. 17 on MediaTek’s NTN IoT capable MT6825 chipset. This achievement is the next step towards NTN device conformity approval bringing next-generation IoT devices based on non-terrestrial networks (NTN) to the market.
07-Mar-2024
Rohde & Schwarz introduces dedicated phase noise analysis and VCO measurements up to 50 GHz with the R&S FSPN50With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.
23-May-2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.
EVM Measurements for ZigBee signals in the 2.4 GHz band
12-Dec-2014 | AN-No. 1EF55
I want to use the LCX series LCR Meter to automatically control and sort components. One of the tasks is to differentiate between the following three values of resistors: - Less than 990 Ohm, - Middle range from 990 to 1010 Ohm (1 kOhm), - More than 1010 Ohm. How can I set this measurement up and which pins do I have to use at the 15 PIN SUB-D socket at the rear side of the LCX?
The intensity button lets you set the level of transparency. You can also minimize a dialog box to the active input field and position it anywhere on the screen.
The R&S®CMW100 communications manufacturing test set with a supported bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices in production. The video demonstrates a typical manufacturing test case using a 5G NR-like waveform.