767 Results
This application note describes how transmitter (Tx) tests (TS25.141 Chapter 6) can be performed quickly and easily by using signal and spectrum analyzers from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA67
This application note presents a solution for testing the complete radar system by generating any kind of radar echo signals.
01-Aug-2016 | AN-No. 1MA283
This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.
24-Feb-2016 | AN-No. 1GP97
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
26-Jun-2020 | AN-No. GFM343
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
This application note describes a test scenario tor cable components with an R&S®CLGD Cable Load Generator and an R&S®FSW Signal & Spectrum Analyzer.
24-Jan-2017 | AN-No. 1MA285
Generating and Analyzing 3 GPP Multicarrier Signals with High Dynamic Range
17-Feb-2005 | AN-No. 1MA48
This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results.
17-Oct-2008 | AN-No. 1EF65
This application note describes how to connect and use the highly popular R&S®NRP-Z family of USB SMART power sensors with the Android application.
04-Jun-2013 | AN-No. 1MA215
This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes.
07-Apr-2021 | AN-No. GFM357
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S®CBTgo software.
18-Jul-2013 | AN-No. 1MA200
Generating Bluetooth RF Test Signals with SMIQ Signal Generator
30-Jan-2001 | AN-No. 1MA31
This application notes introduces two alternative methods how to do the Power Added Efficiency measurement.
22-May-2013 | AN-No. 1EZ64
This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.
13-Jul-2020 | AN-No. GFM345
This application note is a systematic guide to help test engineers configure the Vector Network Analyzer in order to perform compliance test on Automotive Ethernet cables according to the Open Alliance TC9 standard.
13-Aug-2019 | AN-No. GFM323
This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required calibration of the measurement setup and a possible near field to far field transformation when measuring larger devices.
28-May-2018 | AN-No. 1MA304
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
Time-of-arrival (ToA) and Time-Alignment-Error (TAE) are important network synchronization measurements to achieve high network quality and performance.This educational note describes how 5G NR is affected by these synchronization requirements.
17-Aug-2021 | AN-No. 8NT05
This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.
21-Oct-2014 | AN-No. 1EF89
Read this educational note and dive into the discussion about the six most important transformer measurements: turns ratio, mutual inductance, phase angle, primary and secondary inductance, leakage inductance, and interwinding capacitance.
28-Feb-2024
This application note introduces the reader to the SpaceX Hyperloop Pod Competition project and their special demands for the electrical drive train.
31-Mar-2021 | AN-No. GFM360
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices.
20-Apr-2022 | AN-No. 1SL383
This Application Note gives 10 useful Tips & Tricks for the users of Rohde & Schwarz attribute-based instrument drivers.
30-Jan-2017 | AN-No. 1MA228
This application note provides insights into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. Including an introduction to HIL testing and realtime o
22-Jan-2021 | AN-No. 1GP124
The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz.
15-Nov-2017 | AN-No. 1MA294
This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured.
28-Apr-2015 | AN-No. 1MA255
This application note describes how to measure the control loop stability of switch-mode power supplies to get the best performance and confidence of the design.
01-Jul-2019 | AN-No. GFM321
This application note explains the fundamentals of using S-parameters and discusses some common applications in which S-parameter correction is useful.
27-Jul-2012 | AN-No. 1GP70