341 Results
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
16-Jun-2015 | AN-No. 1EF92
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
Current radar development is focusing on the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system.
20-Nov-2014 | AN-No. 1MA234
R&S®VSE-K60(x) / FSW-K60(x) / FSWP-K60(x) / FSV3-K60(x) Transient measurements - Specifications
Connecting simulation and measurements on physical devices
This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier.
05-Aug-2021 | AN-No. 1SL371
This application note focusses on signal measurement using the R&S®RTO digital oscilloscopes ant the output of I/Q data for processing.
18-Oct-2016 | AN-No. 1MA249
EVM Measurements for ZigBee signals in the 2.4 GHz band
12-Dec-2014 | AN-No. 1EF55
The specifications of the R&S®FSx-K91/p/n/ac/ax/be, R&S®FPS-K91/p/n/ac and R&S®VSE-K91/p/n/ac/ax/be WLAN measurement applications are based on the data sheet specifications of the R&S®FSW, R&S®FSVA3000, R&S®FSV3000 and R&S®FPS signal and spectrum analyzers.
Rohde & Schwarz offers a state of the art solution for testing power amplifiers with envelope tracking and/or digital pre-distortion. This application note introduces the compact and user-friendly test solution in detail and presents measurement examples.
25-Sep-2014 | AN-No. 1GP104
This application note provides insight into some of these specifications and how test and measurement equipment can simplify the task of deriving requirements for RF sub-systems.
10-Apr-2013 | AN-No. 1MA221
In this application note we discuss potential 5G waveform candidates, list their advantages and disadvantages and compare them to OFDM.
10-Jun-2016 | AN-No. 1MA271
Signal Generation and Analysis
This Application Note supplements the video series, describing signal generation and signal analysis for Dynamic Spectrum Sharing (DSS) for LTE and 5G NR.
30-Mar-2020 | AN-No. GFM337
This application note describes typical spectrum analyzer measurements in production environments and discusses different approaches to speed them up.
17-Nov-2014 | AN-No. 1EF90
This application note shows how to use Rohde & Schwarz signal generators and analyzers for testing early 5G New Radio components, chipsets and devices. Methods for easy creation and analysis of custom OFDM are explained.
23-Oct-2017 | AN-No. 1MA308
04-Jan-2024
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks.
25-Nov-2016 | AN-No. 1MA263
08-Dec-2021
Sivers Semiconductors and Rohde & Schwarz collaborate on testing 5G RF transceivers up to 71 GHzAs 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
30-Aug-2023
Rohde & Schwarz showcases its latest mmWave test solutions at the European Microwave Week in BerlinJoin Rohde & Schwarz in Berlin for EuMW 2023, Europe's premier microwave event! Discover cutting-edge test solutions focused on early sub-THz research for 6G.
Digital pre-distortion (DPD) is a common method. This article describes an approach to generate a pre-distorted signal based on a hard-clipper.
13-Sep-2017 | AN-No. 1EF99
The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band.
08-Mar-2016 | AN-No. 1MA273
The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,
01-Aug-2017 | AN-No. 1MA289
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA114
Hints and Tricks for Remote Control of Spectrum and Network Analyzers
19-Aug-2014 | AN-No. 1EF62
30-Oct-2023
Enabling an AI-native air interface for 6G: Rohde & Schwarz showcases AI/ML-based neural receiver with optimized modulation at Brooklyn 6G Summit, in collaboration with NVIDIARohde & Schwarz and NVIDIA showcase AI/ML-based neural receiver with custom modulation at Brooklyn 6G Summit
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
Direct remote control of OSP via VNA and SA
06-Dec-2013 | AN-No. 1MA226
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314