Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1118 Results
R&S®CMWcards is an intuitive and user-friendly software application that makes NB-IoT OTDOA positioning design verification easier than ever.
26-Nov-2018
For customers who have already used automated R&S SFQ setups in development and production, the implementation of the successor instrument results in a need to adjust the SCPI commands formerly used.This document provides an overview on how SCPI commands that are used with the R&S SFQ change with the new test transmitter as well as a cross-reference list in the form of an EXCEL sheet.
23-Jun-2006 | AN-No. 7BM56
Application Note 1MA81 has been replaced by .
05-Jan-2012 | AN-No. 1MA81
Correct and time-saving parameter configuration thanks to predefined DVB-T2 test configurations in the R&S®SFU broadcast test system
18-Apr-2013
Today’s infotainment units offer a wide range of features to truly embody the concept of the connected car.
14-Jun-2018
This application note describes the procedure used to create LabVIEW driver libraries by importing *.DLL files from the GTSL (Generic Test Software Library) development framework for the R&S CompactTSVP. This common recipe allows all upcoming versions of the GTSL to be imported as well, for seamless deployment of R&S CompactTSVP modules.
28-Dec-2007 | AN-No. 1SP801
High-speed serial interfaces often transmit data with differential signaling. For probing on the signal, trace differential probes are used. Besides the differential inputs, these probes often provide an additional connection for ground – especially the higher bandwidth models. The ground connection on the R&S®RT‑ZMxx modular multimode probes can be used to improve measurements on high-speed differential interfaces.
09-Nov-2017
Integrated beamformer ICs shrink the size of antenna feed electronics. Multiport network analyzers shrink the necessary test setup down to one instrument.
08-Jan-2019
automotive radar echo generator, AREG100A, automotive radar sensors Automotive radar sensors are safety-relevant and have to be comprehensively tested for reliable functioning. The R&S ® AREG100A automotive radar echo generator is a versatile instrument for stimulating radars in the 24 GHz ISM band and in the 77 GHz and 79 GHz frequency bands. Together with the R&S ® ATS1500A shielded chamber, it offers
06-Aug-2018
A programmable data generator such as the combination of SME with option SME-B11 is a novelty with signal generators. To make it easy for the user to get acquainted with the option and to ensure efficient operation, possible applications are described below. The data generator is used for producing binary data as well as control signals for level switching whenever digitally modulated signals are used. For a start we should like to deal in brief with the various settings available for digital modulation. Taking GSM as an example, the programming of data lists will be described next. The description for GSM can be easily applied to other digital networks as well. Next the generation of level bursts and the extension of data generator memory with option SME-B12 are described. The last section deals with special subjects such as FSK using data rates below 400 bits/s and pulse-amplitude modulation. A basic knowledge on digital modulation and TDMA will be sufficient to follow the topics.
01-Jul-1999 | AN-No. 1GPAN08
The numerous supply voltages of FPGAs, CPUs and DSPs need to be powered-up in a specific order to ensure reliable operation. It is crucial to verify this power sequencing during circuit design and product development.
08-Oct-2018
DC power supplies from Rohde & Schwarz can be connected and configured for synchronized on/off switching of all channels across multiple power supplies in intricate and complex systems.
28-Apr-2023
This application note describes remote operation or monitoring of the signal and spectrum analyzers R&S® FSV3, R&S® FSV7, R&S® FSV13, R&S® FSV30 through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
15-Jan-2009 | AN-No. 1EF67
The application note describes the Measurement Uncertainty Analysis Program NRV-Z. The program is used to determine measurement uncertainties that inevitably arise when using power meters. In particular, it covers the NRV-Z family of thermal sensors and diode sensors for high-precision power measurements, as well as the compatible basic units NRVD, NRVS and URV55.
26-Jul-2001 | AN-No. 1GP43
This R&S®CMU200 1xEV-DO Release B non-signaling testing application provides the means to allow users to perform RF measurements on a 1xEV-DO Rel. B access terminal in a mode that does not require any signaling. This allows the calibration and final tests of a Rel. B AT, according to the minimum performance standards with the R&S®CMU200.
29-Jun-2009 | AN-No. 1CM74
The R&S®CMW wideband radio communication tester platform (R&S®CMW500, R&S®CMW270) uses high accuracy distance measurements (HADM) with phase based ranging (PBR) for a comprehensive and fully automated test solution to verify Bluetooth® Low Energy physical layer functionality
06-Sep-2023
For automated test applications, measurement time is often as important as the quality of the measurement. As with many situations, time is money. In practice, phase noise measurements are generally not considered fast, but test engineers still desire to save as much test time as possible. The Rohde & Schwarz®FSWP (FSWP) is a modern, digital signal processing based, phase-noise test set that performs many tasks in parallel in an effort to improve measurements speed. However, several measurement settings drastically affect measurement speed. This paper will discuss these settings and provide suggestions on improving overall measurement speed.The three key instrument parameters that affect FSWP measurement speed are:1. Number of cross correlations2. Resolution bandwidth (RBW)3. Offset frequency span
08-Oct-2020 | AN-No. GFM354
Calibration and Verification Solution
The UWB (Ultra-Wideband) technology is a short range wide-band radio technology specified for device to device communication operating in unlicensed spectrum. It is an RF positioning technology that enables accurate and secure peer-to-peer ranging between mobile devices with robust resistance to interference while consuming very low energy and coexisting well with other radio communication systems. UWB is used for a variety of different applications, such as asset tracking, secure payment, personal tracker, real time location services and keyless access and start of a vehicle etc. According to ABI Research forecasts, there will be well over 1 billion UWB annual device shipments by 2026. Almost every smart phone shipped in 2026 will support UWB services.Talking about testing aspect of a UWB device, in general two test methodologies can be adopted as other wireless products, either the traditional testing mode (so-called conducted test mode) with wired RF connection between the test measurement equipment and device under test (DUT) or over the air (OTA) test mode in an OTA anechoic chamber. Sometimes, it is not always possible or necessary to perform the tests under conducted mode due to the limiting factors, e.g. cost, space, complexity and direct access to the RF connectors of the product. In this case, OTA testing is then becoming a non-evitable approach. Moreover, OTA testing reflects the usage of DUT in a real condition.In this application note, R&S® OTA test solution covering transmitter (Tx), receiver (Rx) and Time of Flight (ToF) testing in Wireless Automated Testing (WMT) environment is described. The measurement results throughout the whole document are based on NXP Trimension™ NCJ29D5 UWB automotive IC.
12-Apr-2023 | AN-No. 1SL394
Rare faults and intermittent signals are difficult to capture. The R&S®RTO Oscilloscope supports the acquisition and the detailed signal analysis of these signals by using the history mode. The history mode allows the user to look back to previous acquisitions and apply the wide set of analysis functions of the RTO. Furthermore it stores the accurate recoding time of the waveforms for subsequent analysis.
03-Jun-2013 | AN-No. 1TD02
The R&S®ZNA vector network analyzer offers a dynamic range that is unbeatable on the market. This kind of sensitivity unlocks potential applications that previously could not be addressed with a vector network analyzer.
07-Jan-2019
Combining the R&S®UPP audio analyzers with the R&S®SMB100A signal generators provides the most compact and fastest test solution for modern FM car radios
19-Feb-2015
This application note explains the measurements on 3GPP Base Station Transmitter signals according to TS 25.141, using the Signal Analyzer FSIQ with the Code Domain Power application firmware FSIQ-K72.
17-Aug-2001 | AN-No. 1EF44
This application note helps the user to configure a Rohde & Schwarz vector signal generator for LTE FDD repeater conformance testing. It explains step by step how to set up the baseband signal for the various test cases defined in the 3GPP Technical Specification 36.143.The R&S®SMx vector signal generators provide predefined, LTE-conform test models and are therefore ideal for LTE repeater conformance testing. The test cases in TS 36.143 can be set up with a single instrument which provides all necessary test signals including the four specified repeater stimulus signals.
26-Apr-2013 | AN-No. 1GP85
Rohde & Schwarz has a tool that can configure all instruments and channels from one interface to maintain an overview of the states and measurement values for all channels.
28-Apr-2023
Radio frequencies in bands around 28 GHz are being discussed as candidates for mobile communications of the fifth generation (5G). Beam steering will be a key feature in the context of 5G. It will be a major challenge to test the beam steering capabilities of base stations and user equipment in every phase from research and development through production. Conducted measurements will be mainly replaced by over-the-air measurements of electromagnetic radiation. Rohde & Schwarz offers the R&S®NRPM Over-the-Air (OTA) Power Measurement Solution that perfectly fits such measurement needs.Part of this solution are the R&S®NRPM-A66 antenna modules. They have integrated diode detectors. Thus, there are no cables between the antenna and the detector as in traditional setups. This avoids high and potentially unknown RF losses. The R&S®NRPM-A66 antenna modules with their integrated diode detectors are factory calibrated, which means that the user does not have to calibrate them to achieve highly accurate measurement results.This application note contains theoretical background on OTA power and pattern measurements. It gives step-by-step instructions for the verification of the power level and the radiation pattern of a device under test (DUT) in comparison to a golden device, and it presents an approach for verifying the accuracy of beam steering.
29-Aug-2017 | AN-No. 1GP118
R&S®RTP, R&S®RTO, R&S®RTE, oscilloscopes, acquired waveform data, python How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE. Working with acquired waveform data in Python R&S®RTP, R&S®RTO, R&S®RTE, oscilloscopes, acquired waveform data, python How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE. Working with acquired waveform
12-Jan-2022
In this day and age of internet of things, more and more devices are connected to the local network, making it even more difficult for the IT department to monitor them. Rohde & Schwarz instruments are also increasingly accessed via their LAN interface, which provides additional convenience features such as remote desktop, SMB file transfer or a web interface. To make it easier to monitor the use and status of instruments, some devices offer a software option, the Health and Utilization Monitoring Service (HUMS).HUMS can be accessed via SNMP and REST (HTTP) and provides all necessary information about the health status and utilization over time in many details.This application note describes how to access HUMS and what data is provided.
11-Jan-2021 | AN-No. GFM336
When measuring audio components with unknown transients, the experienced engineer watches the settling of the DUT before accepting a measured result to be valid. The settling function in the UPL/UPD simulates this process and automates it by continuously comparing the measured value with a number of measured values stored before. A measured value is only accepted as being valid if it is within the tolerance limits entered by the user. This application note explains the settling process and gives hints for practical use.
03-Jun-1998 | AN-No. 1GA12
Phase stability over time is a key characteristic for phase-coherent signals. A common 1 GHz reference signal maintains high phase stability between the RF outputs of multiple R&S®SGT100A SGMA vector RF sources.
09-Jan-2017
This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.First it explains how to use the spectrum and interference analysis functions during each step of interference hunting. It also illustrates the explanations with a common interferer example. Then it points out the most common interference sources in cellular networks and gives tips on how to identify them.
21-Oct-2014 | AN-No. 1EF89