214 Results
All wireless devices must be tested for radiated spurious emissions (RSE) to verify compliance with national and international standards such as ITU, ETSI and FCC. The configuration required is similar to an EMI measurement setup, with the additional challenging task of measuring the low level spurious emissions in presence of the carrier frequency of a wireless device. The R&S®TS8996 RSE test system handles these tasks with a single setup and covers all relevant carrier frequencies and bandwidths used in wireless communications.
Electronic desgin, Power integritiy, DC/DC converter test, EMI Debugging Watch this wrap up of the Electronic Design and Test Day 2020 at Rohde & Schwarz Munich.
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
04-May-2023 | AN-No. 1SL396
24-Nov-2022
AVL and Rohde & Schwarz collaborate to automate and speed up EMC tests under real driving conditionsElectric vehicles contain many electronic components that emit radio-frequency interference which may have a negative impact on the vehicle performance and driving experience. To ease and speed up the development process, AVL and Rohde & Schwarz, two of the world’s leading providers of automotive test systems, present an innovative solution for automated electromagnetic compatibility (EMC) data analysis of an electric drivetrain under real driving conditions.
The demand having a snubber circuit in the power supply topology leads to specific verification methods during the design which are the main focus within this document.
23-Jun-2021 | AN-No. 1SL363
08-Jul-2021
Rohde & Schwarz and Quectel cooperate on Cellular-V2X test case to accelerate 3GPP validation in the automotive industryRohde & Schwarz in partnership with Quectel announces the verification of selected 3GPP test cases based on a system with its R&S CMW500 wideband radio communication tester against a Quectel AG15 C-V2X module.
20-Jul-2023
New software option further boosts applications for BBA300 ultra-wideband RF amplifierNew software option further boosts applications for BBA300 ultra-wideband RF amplifier - Simple configuration through web interface allows full remote operation
07-Oct-2022
Rohde & Schwarz brings Oscilloscope Days to the next level with School of Measurement live events across EuropeThe Oscilloscope Days educational event at Rohde & Schwarz continues to evolve, combining virtual sessions with a series of in-person events, called the School of Measurement. Starting with a digital kick-off on October 27, 2022, the series is set to last through 2023 with stops at multiple locations across Europe. It will cater to electronics engineers from Europe and beyond. Participation in the seminars is free.
17-Nov-2021
Rohde & Schwarz adds new frequency ranges to its portable all-rounder spectrum analyzersNew base models for the portable R&S FPL1000 take spectrum and signal analysis capabilities up to 26.5 GHz. They combine the functionality of benchtop instruments and the portability of a handheld instrument, with intuitive features to make high performance measuring on the go fast and simple.
29-Mar-2021
Electronic Design and Test Days 2021 delivers latest insights from Rohde & Schwarz and industry expertsThe two-day virtual event Electronic Design and Test Days 2021 organized by Rohde & Schwarz will deliver the latest expertise from leading industry experts on high speed digital design and power electronics. Attendees will experience live keynotes and conference sessions, virtual exhibition and educational areas including a variety of subjects available on demand, and an interactive chat.
22-Mar-2021
Rohde & Schwarz hosts Oscilloscope Days 2021, a new two-day digital seminar eventOscilloscopes take center stage at the online educational event organized by Rohde & Schwarz in partnership with Würth Elektronik and Farnell. Held in May 2021 and catering to electronics engineers from around Europe and beyond, participation at the Oscilloscope Days 2021 is free. The live sessions will be streamed simultaneously in English, German, French and Russian.
18-Nov-2020
Rohde & Schwarz and Rosenberger verify MultiGBASE-T1 compliance test according to OPEN Alliance TC9 test specificationTest and measurement specialist Rohde & Schwarz, together with connector and cable assembly manufacturer Rosenberger have successfully demonstrated compliance testing for MultiGBASE-T1 supporting 2.5/5/10GBASE-T1 automotive Ethernet speeds, based on the OPEN Alliance TC9 working group test specification. This development enables vehicle manufacturers and component suppliers to have confidence in the performance of future, high-speed in-vehicle networks.
18-Jan-2023
Rohde & Schwarz to host Digital Debug Design challenge at DesignCon 2023At DesignCon 2023, Rohde & Schwarz will not only showcase live demos covering the latest industry trends, attendees will also be able to test their knowledge at the interactive Rohde & Schwarz “Are you a genius?” Digital Debug Design challenge. Plus, Rohde & Schwarz will offer a full-day workshop in cooperation with industry experts such as Samtec, ataitec, Clear Signal Solutions, and Missouri University of Science & Technology.
02-Jan-2024
CES 2024: Rohde & Schwarz showcases leading edge test solutions for automotive radar object simulation and wireless battery management systemsCES 2024: Rohde & Schwarz showcases leading edge test solutions for automotive radar object simulation and wireless battery management systems
17-Oct-2023
Rohde & Schwarz to host Design Challenge at Automotive Testing Expo in Novi, MI.Rohde & Schwarz to host Design Challenge at Automotive Testing Expo in Novi, MI.
15-Sep-2022
Unique features increase test efficiency and flexibility of R&S ATS1500C automotive radar test chamber from Rohde & SchwarzThe R&S ATS1500C antenna test system from Rohde & Schwarz offers a new temperature test option and a new feed antenna. These additional features enable temperature-controlled measurements in a wide temperature range as well as parallel access to both polarizations, increasing test efficiency and flexibility. The solution will be shown at EuMW from September 27 to 29, 2022 at booth D18 of the Milano Convention Centre.
24-Nov-2020
New “Full Bench. High Value.” promotion by Rohde & Schwarz builds on successful complete solutions offerWith a typical engineer’s bench in mind, Rohde & Schwarz has created a new promotion, building on its successful campaign from last year. Under the motto “Full Bench. High Value.” customers can purchase for a limited time an even wider selection of fully equipped entry-level T&M instruments, pre-configured with all options at unrivaled package prices.
27-Jan-2022
Rohde & Schwarz furnishes EMC and radio labs of CSA Group′s new European headquarters with state-of-the-art T&M equipmentCSA Group, a global leader in testing, inspection and certification, has built a new European headquarters in Plattling in the State of Bavaria, Germany. As part of this project, CSA Group is considerably expanding its testing capabilities for German and European customers. For example, new test labs will enable a wide variety of product tests and certifications even of very large devices weighing up to 20 tonnes. The required test and measurement and amplifier equipment comes from EMC market leader Rohde & Schwarz.
01-Jul-2021
New R&S RTO6 oscilloscopes from Rohde & Schwarz deliver instant insights thanks to enhanced usability and performanceRohde & Schwarz takes its successful R&S RTO family to the next level with the all-new and redesigned R&S RTO6 oscilloscope. Featuring an updated user interface on a larger, 15.6-inch Full HD touchscreen and straightforward workflows, it speeds up daily measurement tasks. The R&S RTO6 delivers deep insights into designs on the engineer's workbench with state-of-the-art specifications such as an outstanding 9.4 ENOB, an unparalleled update rate of one million waveforms per second as well as a comprehensive toolset of analysis functions.
The oscilloscope offers hardware-based triggering on specific protocol content, such as addresses, data and protocol errors. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 makes tracking down protocol errors or specific parts of a frame straightforward with a protocol aware trigger.
All measurement diagrams have labeled scales so you can immediately read important signal characteristics. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®SmartGrid of R&S®RTO6 oscilloscopes helps to configure an individual layout of the waveform display.
The R&S®RTO6 series oscilloscopes leverage engineering expertise to build measurement confidence with deep insights whenever you need them. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 series oscilloscopes leverage engineering expertise to build measurement confidence with deep insights whenever you need them.
These results can also be used in math functions. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 helps you to tackle novel, complex measurement issues.
Furthermore, spectrogram and zone trigger in frequency domain enable in-depth signal analysis and advanced trigger settings for spectral signal components. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi Operate the R&S®RTO6 frequency analysis function like a spectrum analyzer and benefit from RF knowledge put into an oscilloscope.
Even with deep memory acquisitions, ASIC signal processing ensures a smooth workflow. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 oscilloscope acquisition memory can be extended up to 2 Gpoints.
The Gaussian falloff in frequency response leads to low overshoot and precise acquisition of signal edges. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi For accurate signal acquisition, R&S®RTO6 oscilloscopes have a flat frequency response over the entire specified bandwidth, ensuring accurate measurement results.
The app cockpit provides a one-tap location to access all of the available oscilloscope applications. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 has a touch-optimized user interface that speeds up every measurement tasks.
This way, very low noise levels are achieved that help to measure signals accurately. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi For the R&S®RTO6 oscilloscope series, all aspects to minimize noise were considered to help measure signals accurately.
This means that R&S®RTO6 oscilloscopes have the best trigger sensitivity in the industry. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 uses HD Mode and digital trigger to isolate small signals.
The high update rate is achieved even when histograms, masks or cursor measurements are active. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 oscilloscopes reach an exceptional update rate of up to 1 million waveforms/s.