767 Results
This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use.
15-Oct-2015 | AN-No. 1GP103
This application note belongs to a series of application notes which explains how to test EW receivers at RF in the lab with commercial, off-the-shelf signal generators and software.
23-Mar-2021 | AN-No. 1GP123
radiated conformance testing according to TS 38.141-2, Rel. 16
This application note describes all mandatory radiated RF transmitter tests (TS 38.141-2, chapter 6), according to Release 16.
20-Dec-2019 | AN-No. GFM324
Balanced Reflection Measurement with R&S ZVL
14-Feb-2008 | AN-No. RSI05
The application note has a focus on the theoretical background of the PLL measurement method and illuminate its application in the R&S FSUP.
04-May-2010 | AN-No. 1EF72
This application note describes ATSC Mobile DTV standard A/153, ATSC-M/H. This standard is completely implemented in the R&S AEM100 ATSC-M/H Emission Multiplexer.
22-Jan-2011 | AN-No. 7EB01
This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources.
28-Jun-2018 | AN-No. 1EF103
This application note describes the techniques to measure the dielectric properties of materials using a vector network analyzer. It also shows methods for converting the s-parameters to dielectric properties.
23-May-2012 | AN-No. RAC-0607-0019
This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.
11-May-2016 | AN-No. 1MA154
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA114
This application note explains how to generate phase coherent signals with a compact easy-to-use solution.
07-Sep-2016 | AN-No. 1GP108
This application note describes typical spectrum analyzer measurements in production environments and discusses different approaches to speed them up.
17-Nov-2014 | AN-No. 1EF90
This Application Note describes the differences in intermodulation distortion measurements between traditional spectrum analyzers with analog narrow-band IF signal path and modern spectrum analyzers using a wide-band IF signal path and digital RBW filters.
02-Jul-2012 | AN-No. 1EF79
This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB.
12-Jun-2017 | AN-No. 1MA171
This application note presents the Jitter analysis capabilities of the R&S®RTO for digital signals. It demonstrates the basic operation with an application example, and shows the associated jitter analysis.
29-Aug-2013 | AN-No. 1TD03
This application note describes how to determine the uncertainty bounds for a given artificial network impedance for an estimate of the combined standard measurement uncertainty using the Rohde & Schwarz Software “AN Impedance Uncertainty Contribution”.
17-Dec-2010 | AN-No. 1EE23
This application note provides information on how to perform spectral emission measurements on pulsed signals with spectrum analyzers using RBW filters.
06-Jun-2019 | AN-No. 1EF106
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF performance tests (TS 38.141-1), according to Release 16, can be performed quickly and conveniently with signal generators from Rohde & Schwarz
24-Oct-2019 | AN-No. GFM315
This application note is for readers that work with digital radio transmitting and receiving devices or maintain analog radio communication equipment.
10-Feb-2017 | AN-No. 1MA277
Connecting simulation and measurements on physical devices
This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier.
05-Aug-2021 | AN-No. 1SL371
The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators.
03-May-2016 | AN-No. 1MA225
This application note provides information about spectral measurements with noise correction. The basic requirements and the limiting factors of a spectrum analyzer are explained.
25-Oct-2012 | AN-No. 1EF76
This application note describes methods using an R&S®ZVA network analyzer to accurately measure all the key parameters of frequency converters.
30-Apr-2015 | AN-No. 1MA224
This application note describes how performance tests can be performed quickly and easily by using vector signal generators from Rohde & Schwarz.
04-Mar-2015 | AN-No. 1MA78
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
12-Sep-2013 | AN-No. 1EF87
This application note shows all necessary settings for performing Dual Receiver Measurement using the R&S®EMC32-K27 option via R&S® EMC32 Measurement Software.
28-Sep-2017 | AN-No. 1SP20
This application note explains step by step all necessary settings for transmitting parameters of the disturbance signal from an EMS test to a dAV Camera System via serial port or LAN interface
10-Dec-2019
From designing a test setup to performing accurate measurements
This application note discusses important aspects of double-pulse test setups as well as how to perform accurate measurements. Double-Pulse testing is a standard test-method.
22-Mar-2021 | AN-No. GFM347