8448 Results
This application note shows how to configure the R&S®AdVISE visual inspection software to automate the immunity testing in line with EN 55020 and CISPR 35 on TV sets and monitors.
30-Jul-2020 | AN-No. 1S007
Testing the Ericsson<sup>®</sup> Node B Typ RBS 3202<sup>®</sup> with R&S CMU300 BTS Radio Communication Tester and NetHawk<sup>®</sup> RNC/Iub Simulator<sup>®</sup>
15-Oct-2004 | AN-No. 1CM56
Simulating realtime fading with R&S® vector signal generators made easy with a multitude of standard-compliant, preconfigured fading scenarios. This application note gives a brief introduction to fading and explains how to use the channel simulators in custom applications.
26-Apr-2013 | AN-No. 1GP99
Rohde & Schwarz mobile network testing provides a unique combined test solution that accurately measures the DL coverage using network scanners.
20-Feb-2018
Dolby compliance testing with audio analyzers and test software from Rohde & Schwarz
25-Jul-2014
Camera, display and multimedia testing on automotive in-vehicle infotainment (IVI) systems
24-Apr-2018
Rohde & Schwarz signal generators and spectrum analyzers can be used to test IEEE 802.11ax stations in terms of uplink accuracy requirements.
09-Nov-2017
In this Application Note, illustrative measurements of individual RFFE components, as well as a complete RFFE, will be made.
27-Feb-2017 | AN-No. 1MA299
GSM Mobile Tests under Conditions of Fading
07-Nov-1997 | AN-No. 1MA02
Modern communications devices support a large number of standards in a very small space, which can lead to interference due to occupying the same frequency bands.
14-Mar-2016
The R&S ZNB vector network analyzer is easy to configure and calibrate using the built-in intermodulation wizard.
19-Dec-2013
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA114
DOCSIS has become the established standard for return channels when it comes to implementing interactive services in broadband cable networks. The quality of these signals is essential to network efficiency. The analysis can be done using the highprecision R&S®ETL, R&S®EFA and R&S®FSH3-TV TV test receivers that have proven themselves in the downstream. These T & M instruments can be quickly and easily configured for measuring the upstream.
13-Jul-2012
Time Domain Measurements using Vector Network Analyzer ZVR
04-Aug-1998 | AN-No. 1EZ44
Increase the IP connection security of your IoT device
04-Apr-2017
TD-SCDMA Test Signals in Accordance with Standards TS 34.122 and TS 25.142
10-May-2007 | AN-No. 1MA104
EVM Measurements for ZigBee signals in the 2.4 GHz band
12-Dec-2014 | AN-No. 1EF55
Carrier Aggregation for IEEE 802.16m. Signal Generation and Analysis
22-Mar-2010 | AN-No. 1MA173
Noise figure is an important parameter that describes the noise contribution of an electronic device. A classical approach to measure the noise figure is to use a noise source which delivers two different input noise powers by switching between a “hot” and a “cold” state and a noise receiver
23-Dec-2021 | AN-No. 1SL378
ATSC receivers must fulfill the ATSC Receiver Performance Guidelines before they can be sold freely in the markets that have adopted the standard.
29-Sep-2016 | AN-No. 1GP111
The R&S®RTx-K36 frequency response analysis (Bode plot) option provide a low-cost alternative to low frequency network analyzers or dedicated standalone frequency analyzers.
31-Dec-2018
The combination of high power and current being sharply switched on and off has a lot of potential for EMI.
30-Jun-2019
Rohde & Schwarz presents the R&S®ATS1000 antenna test system, a highly accurate solution for testing 5G antennas up to mmWave frequencies in a mobile shielded chamber.
17-Oct-2017
Additional Tests on CDMA2000® Mobile Stations in Accordance with Standard TIA-98
05-Jan-2012 | AN-No. 1MA86
The most common abbreviations used in the standards for digital TV: MPEG2, DVB and ATSC
20-Jul-2001 | AN-No. 7BM27
Generating the Noise Field for Ambient Noise Rejection Tests
12-Oct-2010 | AN-No. 1GA51
The R&S ® AREG100A automotive radar echo generator provides OEM test engineers with a powerful solution for reliable testing of automotive radar sensors during final inspection at the end of assembly lines.
13-Aug-2018
This application note describes the technology behind NG eCall and presents conformance tests for NG eCall using the R&S®CMW500 RF tester.
06-Jun-2019 | AN-No. GFM312