350 Results
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
MWC2019, SMW200A, SMW-B15, FSW, fading, 5G, Rel.15, base station test, performance test, FR1, FR2 Rohde & Schwarz shows the most compact solution on the market for 5G NR base station performance testing at GSMA Mobile World Congress 2019 in Barcelona.
FE170ST, FE170SR, 6G tester, 6G test quipment, D-Band test equipment The basebands of a 2-path R&S®SMW200A signal generator can be combined to provide a signal with 4 GHz RF bandwidth.
13-Mar-2023
Rohde & Schwarz and SatixFy to demonstrate wideband DVB-S2X beam hopping and DVB-RCS2 at Satellite Show 2023Rohde & Schwarz will showcase an end-to-end test infrastructure featuring its R&S SMW200A vector signal generator and R&S FSW signal and spectrum analyzer together with SatixFy’s Sx3099 modem ASIC demonstrating DVB-S2X Annex E wide bandwidth beam hopping and high bit rate DVB-RCS2 transmission.
Rohde & Schwarz user manual for the R&S®Pulse Sequencer (DFS), option R&S®nnn-K350, comprising instructions on how to generate test signals and description on the supported radar test patterns.
06-Jun-2022
Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS2022Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS 2022.
08-Dec-2021
Sivers Semiconductors and Rohde & Schwarz collaborate on testing 5G RF transceivers up to 71 GHzAs 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.
Due to the lack of a 6G standard, we showcase a 5G NR PUSCH multi-user MIMO scenario, emulating two users with 2x2 MIMO, that are independently faded to simulate realistic channel conditions using the R&S SMW200A vector signal generator. The signal is captured using the MSR4 satellite receiver and transferred to a server.
VIdeo, SMW200a, LTE Demonstration of how to create LTE and LTE-Advanced signals, for example with cross-carrier scheduling for carrier aggregation.
02-May-2017
Rohde & Schwarz T&M equipment adopted by Renesas for R&D, conformance test and production of IEEE 802.11p devicesRohde & Schwarz T&M equipment enables semiconductor manufacturer Renesas to provide first class communications solutions for the 11p market.
Rohde & Schwarz user manual for the Pulse Sequencer Software for signal generators (options R&S®Snn-K30x), comprising instructions on how to create pulses and sequences, define antenna scans, emitters and receivers and create complex scenarios.
Based on the new high-performance R&S®SMW200A vector signal generator and the R&S®RTO digital oscilloscope, the solution provides MIMO signal generation and realtime channel emulation (up to 4x4 or 8x2) as well as synchronous analysis of multiple TX antenna signals.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, signal generation, signal analysis, FSW, SMW200A he video demonstrates high frequency signal generation and analysis using signal generator and analyzer solutions from Rohde & Schwarz.
The new R&S FE110ST/SR frontends extend the frequency range of Rohde & Schwarz signal sources such as the R&S SMW200A and signal analysis instruments such as the R&S FSW signal and spectrum analyzer to cover the W band from 70 GHz to 110 GHz. This video shows the excellent signal performance and the support of swept measurements and local oscillator coupling of the FE frontend series.
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, the video demonstrates the gain transfer method in order to carry out repeatable and reliable over-the-air (OTA) measurements. Calibrating OTA test systems - gain transfer method | R&S Gain transfer method is an example of OTA test system calibration.
The R&S®SMW200A vector signal generator together with the R&S®Pulse Sequencer software package is a powerful off the-shelf radar signal simulator. It can simulate RF emitter signals from single or multiple moving emitters in the lab. Simulating moving emitters | Rohde & Schwarz Simulating moving radar emitters is important in most test cases.
The 5G NR signal uses a subcarrier spacing of 120 kHz by applying a periodicity of 1.25 ms and is generated with the R&S®SMW200A vector signal generator. How to generate and analyze 5G NR TDD signals? | R&S The 5G NR signal uses a subcarrier spacing of 120 kHz by applying a periodicity of 1.25 ms. Learn how to generate the uplink portion of a 5G NR TDD signal.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mobile network testing, NSA, non-standalone mode, network scanner, drive test, SMW200A, TSMA6, TSME6, ROMES4 The video demonstrates how to measure all synchronization signal blocks (SSBs) in different frequencies with all SSB indices.
It demonstrates how to test a discrete transceiver for 5G NR based on the latest data converters from Texas Instruments, the DAC38RF82 and the ADC12DJ3200, using the R&S®SMA100B RF and microwave analog signal generator, the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G, UFMC, GFDM, FBMC In this video we explore how to set up Rohde & Schwarz signal generators and spectrum analyzers to characterize a 5G power amplifier using 5G waveform candidates, such as FBMC,
We show how the SMW200A can be used to easily configure 5G NR signals to test DUTs and to achieve excellent EVM measurements without the need for any extensive calibration procedures. EVM, Optimize EVM, 5G NR, signal generator, signal analyzer, 5G, Component Testing, FR2, SMW, FSW Easy and optimized EVM measurement of 5G NR signals
The new R&S FE110ST/SR TX/RX frontends extend the frequency range of Rohde & Schwarz signal sources such as the R&S SMW200A vector signal generator and signal analysis instruments such as the R&S RTP oscilloscope to cover the W band from 70 GHz to 110 GHz. They complement the company’s portfolio of easy-to-mount frontends.
The R&S®SMW200A vector signal generator together with the R&S®Pulse Sequencer software package is a powerful off the-shelf radar signal simulator. It can simulate RF emitter signals with different angle of arrival in the lab. Simulating Angle of Arrival | Rohde & Schwarz Airborne, naval or land based platforms must have direction finding capability.
Together with the R&S®SMW200A vector signal generator and the R&S®FSVA3000 signal and spectrum analyzer, this setup provides a cost-efficient solution for 5G RF characterization tests. 5G FR2 RF testing, FSVA3044, Tailored solution for OTA measurements thanks to high-frequency frontend modules which can be placed close to measurement chamber.
The R&S®SMW200A vector signal generator transmits a 28 GHz 5G signal that is captured with the R&S®FSW signal and spectrum analyzer. For postprocessing, the R&S®FS-K96PC OFDM vector signal analysis software from Rohde & Schwarz is applied. The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates.
Moreover, they seamlessly integrate with the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer , to offer a plug-and-play experience and pave the way for innovative breakthroughs in the W band . Essentials spectrum analyzers, FE110SR, FE110ST Embrace the power of the W band with the R&S®FE110ST/SR W band converters, which cover the 70-110 GHz range.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mobile network testing, NSA, non-standalone mode, network scanner, drive test, SMW200A, TSMA6, TSME6, ROMES4 This video explains how easy it is to configure the R&S®TSME6 network scanner.
26-Oct-2022
Rohde & Schwarz joins forces with Tsinghua University, Actenna Technology and others to conduct RIS technology trialsTo further exploit the huge potential of 5G, the wireless industry has continued to develop the standard up to Release 16, and development continues. But technology does not stand still, and even as 5G presses forward, a new generation of cellular technology is emerging. Cutting-edge 6G research is already underway at communications equipment manufacturers and research institutions, and reconfigurable intelligent surfaces (RIS) is a major area of interest in 6G research. Rohde & Schwarz, with Tsinghua University and Actenna Technology, recently completed an evaluation and trial of RIS technology to comprehensively evaluate the effects and performance of RIS deployment.
It also demonstrates phase noise emulation using the R&S SMW200A vector signal generator and how this function can be used to test correction algorithms to compensate for CPE in a receiver such as a mobile handset. 5G NR PTRS - how to emulate phase noise | Rohde & Schwarz Why does 5G NR require phase tracking reference signals?