8386 Results
This application note describes remote operation or monitoring of the R&S® RTO digital oscilloscope through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
27-Jul-2010 | AN-No. 1ER01
Synchronization of the datarate of TV Test Transmitter SFQ with an external clock
01-Aug-1997 | AN-No. 7BM39
For the purposes of testing the compatibility and performance of receiver modules, this application note describes how this type of composite T2-Base/T2-Lite RF signal can be simulated using one R&S®BTC or alternatively two instruments from the family of broadcast signal generators.
03-Feb-2014 | AN-No. 7BM81
Transfer of Video Stream Files to and from DTV Recorder Generator DVRG
31-Jul-2003 | AN-No. 7BM37
Hints for Using the Ethernet Interface of DVQ
26-Apr-2001 | AN-No. 7BM04
Video Analyzer UAF as IEC 625 (IEEE 488)-BUS Controller
20-Jul-2001 | AN-No. 7BM16
ASCII Conversion of Binary Data from Test Receiver for Generation of Test Report on PC
18-Jan-2002 | AN-No. 1EE21
This article describes the installation and use of R&S®VENICE DVS for producing and ingesting files for production.
18-Nov-2014
Vulnerabilities of LTE and LTEAdvanced Communication White Paper
16-Sep-2014 | AN-No. 1MA245
Produktionstestsysteme- Funktionstest von Businesstelefonen
08-Apr-2002 | AN-No. 1SP01
The R&S®CMW500 and the R&S®CMX500 are the perfect tools for assessing the funtionality and performance of 5G voice over new radio (VoNR) services.
30-Jun-2021
Automatic run of Rec. 11.10 testcases (remote control of MS functions)
07-Mar-2002 | AN-No. 1CMAN30E
In this whitepaper we describe the device to device communication in LTE from a UE point of view. Network elements are described as far as they concern the UE. In addition to the message transmission and reception, a special emphasis is put on the synchronization between UEs and on the security for the message exchange.
29-Sep-2015 | AN-No. 1MA264
This application note shows how to determine the quality of a video streamed by an LTE mobile with R&S®CMW500 Radio Communication Tester and R&S®VTE Video Analyzer.
08-Sep-2014 | AN-No. 1MA253
A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T / DVB-H transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.
13-May-2013 | AN-No. 7BM101
MHP and SSU Test, Individual Test of MHP and Software Update Capability of Set-Top Boxes
09-Aug-2004 | AN-No. FTK02
This application note describes how to connect and use the highly popular R&S®NRP-Z family of USB SMART power sensors with the Android application.
04-Jun-2013 | AN-No. 1MA215
Integration of DTV Recorder Generator DVRG into a TCP/IP Network
24-Jan-2002 | AN-No. 7BM07
This application note describes how noise figure and gain of amplifiers or converters in the microwave range from 50 GHz to 67 GHz are measured.
12-May-2009 | AN-No. 1EF64
The option R&S®EMC32-K24 extends the emission measurement of the EMI Auto Test (R&S®EMC32-K10) with interactive measurement capabilities. This extension is useful for test verification and measurement during product improvement.
25-Jun-2014 | AN-No. 1SP06
Driving of I²S Bus Components with Audio Analyzer UPD
03-Apr-1998 | AN-No. 1GA25
HSPA+ Technology Introduction - White Paper
14-Feb-2012 | AN-No. 1MA205
This paper shows how to perform a n-port multi-port calibration by using calibration unit with a lower number of ports than available of the vector network analyzer.
06-Feb-2013 | AN-No. 1EZ70
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0.
17-Aug-2012 | AN-No. 1CM96
The R&S® IQ File Cutter Application can load IQ data from supported IQ file formats and export part of the signal to another file.
11-May-2020 | AN-No. GFM338
This application note describes how to characterize RMS jitter with the R&S FSUP signal source analyzer. The instrument can distinguish random jitter and periodic jitter easily and measure all parameters of interest.
05-Apr-2011 | AN-No. 1EF71
This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.
15-Sep-2012 | AN-No. 1MA206
This application note describes the programs R&S®IQ Converter and R&S®IQ Stream Extractor that quickly and conveniently convert the contents of I/Q waveform files of nearly any structure into the I/Q format.
03-Feb-2014 | AN-No. 7BM79
The objective of this paper is to evaluate the performance of a power supply using an oscilloscope. The main measurements taken are the input frequency, output voltage, output current, and the switching frequency.
26-Nov-2013 | AN-No. 1TD04