Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1110 Results
LTE – the fastest growing mobile radio standard – had its beginnings in 3GPP Release 8. Initial improvements and new features were implemented in Release 9. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
This application note describes how to use the Rohde & Schwarz software tool ‘RsBatchConvert.exe’ for the conversion of binary data or WinIQSIM generated AMIQ waveforms into the new waveform format. The tool not only rescales I/Q data contained in the file but also changes the K-option requirement from WinIQSIM Kxx to the new WinIQSIM2 K2xx options. Thus, new instruments with installed K2xx options may be used to continue using existing waveform files.
18-Jun-2009 | AN-No. 1GP64
This document presents a simple procedure for network analysis that is more cost-effective than the use of scalar network analyzers. It allows the accurate measurement of the transmission characteristics of filters, amplifiers and frequency converters over a large frequency and dynamic range. In order to reach very high measurement speeds, Rohde & Schwarz signal generators are operated in 'List Mode', and Rohde & Schwarz power meters are operated in 'Buffered Mode.' The required programming for the signal generator and the power meter is illustrated by excerpts from a Visual Basic program which is available, free of charge, upon request.
14-Jul-2006 | AN-No. 1MA101
After a communications satellite is on its target orbit, several routines need to be performed in order to ensure proper performance from the transponders in the payload. The on-orbit measurements are a vital part of the maintenance of a live satellite as well. Operating a satellite channel for an on-orbit measurement rather than the intended application comes with significant opportunity cost and hence test duration needs to be minimized as much as possible. Rohde & Schwarz test and measurement equipment recommended in this paper is market leading not only in terms of measurement accuracy but also offers unparalleled speed of measurement. This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks when running maintenance routines. A complementary paper treats pre-launch payload measurements.
25-Nov-2016 | AN-No. 1MA263
This application note explains the fundamentals of the cell search and cell selection and reselection procedures required for both modes of UMTS Long Term Evolution: FDD and TDD. It describes how to generate and analyze the required signals using Rohde & Schwarz test and measurement solutions. The application note also shows how to perform interoperability tests and terminal conformance tests according to the baseline of the 3GPP specifications for protocol conformance and Radio Resource Management (RRM).
17-Sep-2009 | AN-No. 1MA150
The R&S®FSW signal and spectrum analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.
17-Jan-2017
Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. The multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth or transmit power and has thus become a key technology. Rohde & Schwarz offers compact and versatile MIMO test solutions with realtime fading including simulation of channel correlations.This application note explains how to set up Rohde & Schwarz signal generators for 2x2, 4x2 and 2x4 MIMO tests with a focus on signal routing, synchronization of the generators, and leveling. Please note that there is a successor application note available: 1GP97. It explains how to use the R&S®SMW200A vector signal generator for testing higher order MIMO systems such as 3x3 and 4x4.
14-Oct-2009 | AN-No. 1GP51
This document describes WLAN tests which rely on communication (signaling) between R&S®CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S®CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU).The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
Reliable testing of HARQ feedback and UL timing adjustment on LTE eNBs with the R&S®SMW200A simplifies eNB performance testing and eliminates the need for test UEs
01-Jun-2016
This application note and associated application software may be used to conduct psychoacoustic speech quality evaluation for Voice over LTE (VoLTE) connections. The measurements are based on recommendations ITU-T P.862 and ITU-T P.863, respectively.
21-Feb-2014 | AN-No. 1MA204
This application note describes how to verify and validate a LTE (FDD) RF chipset using R&S® SMU200A vector signal generator, R&S® FSQ signal analyzer and R&S® EX-IQ Box. The related signal generation as well as signal analysis is described
19-Dec-2008 | AN-No. 1MA138
Due to its outstanding performance the R&S®SMW200A vector signal generator is ideal for testing MIMO receivers in a vast variety of applications offering maximum usability at minimum form factor. It can generate up to eight antenna signals simultaneously in its digital baseband – all standard-compliant and with antenna-specific coding. In addition, it can simulate the complete MIMO transmission channel with up to 32 fading channels, sufficient to emulate higher-order MIMO configurations such as 3x3, 4x4, and 8x4.This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.
24-Feb-2016 | AN-No. 1GP97
This application note describes how to generate the noise field for ambient noise rejection tests according to 3GPP TS 26.132, sections 7.9 and 8.9.
12-Oct-2010 | AN-No. 1GA51
This application note describes the configuration of a Miracast wireless video transmission system and how to measure the delay times between a smart phone or tablet (source) and a television / monitor (sink) display. The accompanying software for Windows 7/8/10, Mac OS X 10.x and MATLAB additionally allows to measure the delay until the video signal is transmitted over the air and optionally until it is available on the HDMI cable of an external Miracast receiver.
01-Oct-2015 | AN-No. 1MA250
This document provides some technical background and guidance on how to optimize the measurement of one of the key performance parameters of WLAN transmitters - the Error Vector Magnitude (EVM).
IEEE 802.11be Extremely High Throughput (EHT), also known as Wi-Fi 7, is the latest amendment of the IEEE 802.11 standard and is still under development. This amendment focuses mainly on improved throughput. To do so, the most notable changes currently implemented are:► New modulation scheme: 4096-QAM (4K-QAM)► Larger bandwidth: 320 MHz► Support for 16x16 MU-MIMO► Enhanced resource allocation in OFDMAThis places special demands on the measurement equipment.
06-Sep-2022 | AN-No. 1EF114
Integrated end-to-end data solution with IP traffic analysis and protocol statistics allows detailed analysis of data traffic generated by IoT and mobile devices.
06-Jun-2017
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
In the satellite sector, components, subsystems and entire satellites must be qualified in a thermal vacuum chamber before they can be used in space. This qualification proves that equipment can not only survive but also function in the harsh conditions encountered during launch and in space.
05-Oct-2022
Multiple Input Multiple Output (MIMO) is an integral part of LTE. Vector signal generators and signal & spectrum analyzers from Rohde & Schwarz support LTE measurements with up to 4 antennas. This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.
09-Oct-2014 | AN-No. 1MA143
This application notes describes remote operation or monitoring of the spectrum analyzers R&S® FSL3, R&S® FSL6, R&S® FSL18 through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
07-Jan-2009 | AN-No. 1EF66
For establishing a WLAN connection between R&S®CMW and device under test (DUT), the WLAN properties at the R&S®CMW have to be adapted to the test conditions. These can vary in several aspects, particularly due to the different WLAN standards and characteristics of the DUT. This document describes the critical parameters and provides step-by-step procedures for the configuration.
08-Dec-2015 | AN-No. 1C106
The amendment 802.11ad to the WLAN standard defines the MAC and PHY layers for very high throughput (VHT) in the 60 GHz range. This application note provides a brief examination of key 802.11ad parameters, describes the required measurements and test setups and contains several important recommendations for over-the-air (OTA) measurements.
17-May-2017 | AN-No. 1MA260
This application note helps the user to configure a Rohde & Schwarz vector signal generator for LTE FDD repeater conformance testing. It explains step by step how to set up the baseband signal for the various test cases defined in the 3GPP Technical Specification 36.143.The R&S®SMx vector signal generators provide predefined, LTE-conform test models and are therefore ideal for LTE repeater conformance testing. The test cases in TS 36.143 can be set up with a single instrument which provides all necessary test signals including the four specified repeater stimulus signals.
26-Apr-2013 | AN-No. 1GP85
This application note describes how to set up 3GPP FDD and LTE multicell and multi-UE scenarios with the R&S®SMU200A with a focus on routing and leveling of the baseband signals. Furthermore, it describes in detail how to determine the correct AWGN settings, i.e. how to calculate the required signal-to-noise ratio for the various scenarios.
10-Aug-2011 | AN-No. 1GP80
Modern radio communication systems have to provide higher and higher data rates. As conventional methods like using more bandwidth or higher order modulation types are limited, new methods of using the transmission channel have to be used. Multiple antenna systems (Multiple Input, Multiple Output – MIMO) gives a significant enhancement to data rate and channel capacity. This application note gives an introduction to basic MIMO concepts and terminology and explains how MIMO is implemented in different radio communications standards.
02-Jul-2009 | AN-No. 1MA142
Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. This multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth, and has thus become a key technology. Rohde & Schwarz offers high-performance MIMO test solutions which provide static conditions without fading as well as simulation of complex fading scenarios.This application note explains how to set up 4x4 and 8x8 MIMO systems using the R&S®SMBV100A signal generator for measurements under static conditions without fading.For simulation of complex fading scenarios please refer to application note 1GP97.
10-Mar-2010 | AN-No. 1GP50
Fading in the baseband of the R&S®SMW200A signal generator is well proven and widely accepted for testing any mobile radio standard. However, there are applications where an RF signal must be faded.A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer with Digital Base Band Interface or with the instrument combination R&S®TSMW / R&S®IQR and an R&S®SMU signal generator with digital baseband inputs and fading simulator option. Note describes how.
27-Feb-2015 | AN-No. 1MA145
The R&S®TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface. The individual transport streams result in a high overall bit rate. To make the streams available on a standard PC, the R&S®TSStream software does not play the transport stream files directly from the hard disk but first loads them into the RAM. The maximum number and length of the transport streams depends solely on the PC's available RAM.
16-Mar-2017 | AN-No. 1GP113
The R&S CMW500/270 can generate and measure standard-compliant WLAN IEEE 802.11ac signals with bandwidths from 20 MHz up to 160 MHz.This document explains the CMW solution for the signals with 160 MHz bandwidth and describes the required configurations step by step.
21-Oct-2013 | AN-No. 1CM101
This application note describes remote operation or monitoring of the signal and spectrum analyzers R&S® FSV3, R&S® FSV7, R&S® FSV13, R&S® FSV30 through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
15-Jan-2009 | AN-No. 1EF67