Search Rohde-Schwarz.com
Find the information you need from Rohde & Schwarz. Search for products, technologies, applications, manuals, datasheets, tutorials, FAQs, and more.
Search Rohde-Schwarz.com
Find the information you need from Rohde & Schwarz. Search for products, technologies, applications, manuals, datasheets, tutorials, FAQs, and more.
103 Results
This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.
19-May-2021 | AN-No. GFM362
radiated conformance testing according to TS 38.141-2, Rel. 16
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
30-Jun-2020 | AN-No. GFM325
Increasing data rates in digital designs and wireless communications require SerDes PLLs and clock synthesizers with low additive phase noise and high jitter attenuation.
01-Aug-2018
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314
The Yamaha® MP Series combined with the R&S®ZNBT vector network analyzer measure the high frequency characteristics of a production lot at high speed and high accuracy.
27-Jan-2020
You need a flexible clock source that can provide the signals needed for today’s and tomorrow’s designs with minimal jitter and noise as well as best spectral purity.
03-Aug-2017
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.
16-Jun-2020
R&S SECOS Secure EPM Communicatons System - Specifications
The document gives an overview and user guide about a link budget calculator for the main components of a basic OTA system. Accomopanied by an Excel sheet containing the Link Budget Calculator.
19-Mar-2019 | AN-No. 1EF104
This application note provides information how to perform spectral emission measurements on UWB signals with spectrum analyzers using wide bandwidth RBW filters.
28-Jun-2021 | AN-No. 1EF109
This application note describes the technology behind NG eCall and presents conformance tests for NG eCall using the R&S®CMW500 RF tester.
06-Jun-2019 | AN-No. GFM312
Rohde & Schwarz presents a customizable solution for testing barometric performance to ensure z-axis accuracy in line with FCC regulations.
24-Jun-2021
How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE.
12-Jan-2022
In order to make it easier to monitor the use and status of instruments, some devices offer the software option Health and Utilization Monitoring Service (HUMS). HUMS provides all necessary information about the health status and utilization over time in many details.
11-Jan-2021 | AN-No. GFM336
30 dBm + 30 dBm = 60 dBm? It is well known that it is not as easy as that.
This application note supplies a free of charge software tool that can e.g. be used to add or subtract an arbitrary number of power, to convert power and voltage units from the linear to the logarithmic scale.
10-Dec-2018 | AN-No. 1GP77
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
The arbitrary waveform feature o Rohde & Schwarz solutions allow you to simulate device behaviors and replaces basic standalone arbitrary waveform generators.
04-Nov-2019
Combining a low-noise oscilloscope with a power rail probe, developed uniquely for measuring power rails, provides a measurement system that delivers measurements that are more accurate.
09-Jul-2020
The R&S®RTP and R&S®RTO2000 oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.
31-Mar-2021
Primer
selection of appropriate RF power sensor
26-May-2021
The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.
19-Oct-2020
Software tool for fast and repeatable optimization of signal analyzer RF front-end settings
The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.
24-Jan-2022 | AN-No. 1EF111
The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.
27-Apr-2023
Measuring absolute power levels precisely and accurately in over-the-air (OTA) scenarios is challenging. The R&S®NRPM-A90(D) OTA power sensors remove many uncertainties by design and give a definite specification for the remaining ones.
25-Feb-2020
The R&S®ZNB measures the signal integrity on the PCB, taking the needed test fixtures and probes into consideration – a complete solution in a compact format.
25-Mar-2020
It is extremely important to test the application level functional performance of home automation products in the presence of interference.
11-May-2020
Load pull is a powerful method to characterize RF power amplifiers and enablse model extraction and validation and performance, ruggedness and efficiency testing.
02-Sep-2020