278 Results
08-Nov-2021
Rohde & Schwarz presents compact CATR based multireflector setup for RRM testing of 5G NR mmWave devicesWith the R&S ATS1800M, Rohde & Schwarz introduces an extension to the well-established R&S ATS1800C, a compact antenna test range (CATR) based 5G NR mmWave test chamber for over-the-air (OTA) testing. By adding two side chambers, the existing test chamber turns into the only single-system solution that enables full 3GPP-specified conformance testing of a 5G NR mmWave device for radio resource management (RRM), including multiple angles of arrival (AoA).
Rohde & Schwarz application sheet for the R&S®NRQ6 frequency selective power sensor, describing complex phase coherent measurements on 5G-NR/LTE/MCCW/CW signals with bandwidths smaller or equal to 100 MHz
MWC2019, 5G NR, Mobile Network Testing, Drive Test, Analytics, GSMA, Mobile World Congress Rohde & Schwarz presented mobile network testing solutions for the complete 5G lifecycle, covering sub-6 GHz and mmWave bands that enable the realisation of 5G NR as it moves from trial networks to commercial deployments at GSMA MWC2019.
Watch this video to explore its underlying performance while measuring error vector magnitude (EVM) of a 100 MHz wide 5G NR signal at 47.2 GHz. The demystifying 5G video series discusses main topics related to 5G including new technology components, procedures and testing challenges. 5G NR signal in the 47 GHz band | Rohde & Schwarz 5G NR signal in the 47 GHz band | Rohde & Schwarz
Automated spectrum clearance in LTE and 5G mobile networks
19-Apr-2024
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
18-Jan-2021
Rohde & Schwarz to provide first IMS test cases for 5G NR protocol conformance validated by PTCRBWith the PTCRB validating the Rohde & Schwarz IMS test cases for 5G NR, the company’s success story of IMS protocol conformance continues.
MTSK2024 session - 5G Wi-Fi application (offloading & VoNR) RedCap Technologies and trend MTSK2024 session - 5G Wi-Fi application (offloading & VoNR) RedCap Technologies and trend MTSK2024 session - 5G Wi-Fi application (offloading & VoNR) RedCap Technologies and trend
Rohde & Schwarz showcases 5G NR high quantity production testing for the sub 6 GHz (FR1) frequency range at GSMA MWC 2019. Rohde & Schwarz showcases 5G NR high quantity production testing for the sub 6 GHz (FR1) frequency range at GSMA MWC 2019. The R&S®CMW100 communication manufacturing test set enables simultaneous testing of multiple DUTs and is suitable for a variety of technologies such as 3G,
This video shows the current status of 5G New Radio (NR) in 3GPP with focus on RAN1 – the group within 3GPP that is responsible for physical layer aspects. This video shows the current status of 5G New Radio (NR) in 3GPP with focus on RAN1 – the group within 3GPP that is responsible for physical layer aspects.
We show how the SMW200A can be used to easily configure 5G NR signals to test DUTs and to achieve excellent EVM measurements without the need for any extensive calibration procedures. EVM, Optimize EVM, 5G NR, signal generator, signal analyzer, 5G, Component Testing, FR2, SMW, FSW Easy and optimized EVM measurement of 5G NR signals
radiated conformance testing according to TS 38.141-2, Rel. 16
This application note describes all mandatory radiated RF transmitter tests (TS 38.141-2, chapter 6), according to Release 16.
20-Dec-2019 | AN-No. GFM324
Making networks ready for 5G expansion The smartphone-based solution R&S®QualiPoc supports the latest test use cases to ensure a smooth roll-out of 5G standalone and Voice over NR (VoNR).
The video also provides insights on the peak-to-average power ratio (PAPR, crest factor) of test model signals and on specific allocation aspects such as in terms of synchronization signal blocks (SSB). 5G NR test model (TM) support for FR1 and FR2 | R&S 5G NR test models for FR1 and FR2 support RF conformance testing of 5G base stations.
The R&S CMX500 radio communication tester is able to measure 5G NR and LTE in parallel.
Rohde & Schwarz presented conformance testing for 5G NR mmWave devices at GSMA Mobile World Congress 2019 in Barcelona. Rohde & Schwarz presented conformance testing for 5G NR mmWave devices at GSMA Mobile World Congress 2019 in Barcelona. The R&S®ATS1800C is a fully anechoic mmWave CATR solution and a turnkey high-end system for conformance and compliance testing.
The demystifying 5G video series discusses main topics related to 5G including new technology components, procedures and testing challenges." 5G NR and LTE coexistence | Rohde & Schwarz Explore how to set up and demodulate an LTE signal to analyze signal performance for possible interference when using 5G NR dynamic spectrum sharing (DSS).
28-Apr-2021
Rohde & Schwarz validates first 5G RRM FR2 conformance tests with the R&S TS-RRM-NR test systemThe Global Certification Forum (GCF) has approved the first two radio ressource management (RRM) conformance test cases for 5G FR2 frequencies, implemented on the R&S TS-RRM-NR 5G RRM conformance test system from Rohde & Schwarz. The test cases have been validated in seven FR2 and LTE band combinations. With this success, Rohde & Schwarz is leading the way in validated test cases for the technically challenging FR2 mmWave frequency bands.
23-Mar-2021
GCF validates IMS test cases from Rohde & Schwarz for 5G NR protocol conformanceIn cooperation with MediaTek, Rohde & Schwarz has submitted test cases for 5G NR protocol conformance test to the Global Certification Forum (GCF). The test cases have been validated successfully, adding on to the company’s legacy in IP Multimedia Subsystem (IMS) protocol conformance testing.
This article describes a mobile network testing approach for 5G new radio (NR) using a passive scanner, which measures synchronization signal (SS)/physical broadcast channel (PBCH) blocks, or SSBs, broadcast from 5G NR base stations.
24-Feb-2022
Rohde & Schwarz validates first 5G RRM FR2 2xAoA conformance tests with the R&S TS-RRM-NR test systemThe PTCRB certification organization has approved the first radio ressource management (RRM) conformance test cases for FR2 with two angles of arrival (2xAoA), using the R&S TS-RRM-NR 5G RRM conformance test system from Rohde & Schwarz. The test cases have been validated in multiple FR2 EN-DC band combinations, using the new R&S ATS1800M CATR based multi-AoA anechoic chamber.
13-Oct-2020
Rohde & Schwarz propels 5G LBS with Assisted-GPS and 5G NR FR2 mmW performance testingAs wireless network operators roll out 5G NR in the millimeter wave spectrum, it is critical to ensure continued reliability of E911 calls and accurate determination of location in mobile devices.
This application note shows how to use Rohde & Schwarz signal generators and analyzers for testing early 5G New Radio components, chipsets and devices. Methods for easy creation and analysis of custom OFDM are explained.
23-Oct-2017 | AN-No. 1MA308
It also demonstrates phase noise emulation using the R&S SMW200A vector signal generator and how this function can be used to test correction algorithms to compensate for CPE in a receiver such as a mobile handset. 5G NR PTRS - how to emulate phase noise | Rohde & Schwarz Why does 5G NR require phase tracking reference signals?
15-Oct-2020
Rohde & Schwarz and VIAVI cooperate to advance their 5G NR test coverageT&M specialists Rohde & Schwarz and VIAVI Solutions verify their respective test equipment on correct implementation for 5G NR and LTE. This exchange between the two companies will help accelerate UE commercialization. The verification is based on the R&S CMX500 5G NR wideband radio communication tester by Rohde & Schwarz and the TM500 network tester for user equipment (UE) emulation by VIAVI.
How can I set the special slot format in 5G NR measurement application for TDD?
29-Apr-2021
China’s mobile network operators select test scanners from Rohde & Schwarz for 5G network optimizationChina Mobile, China Telecom and China Unicom have selected the R&S TSME6 drive test scanner from Rohde & Schwarz for their 5G network deployment and optimization efforts. Rohde & Schwarz China and Zhuhai DingLi Corp., Ltd. have jointly won the three tenders for each operator’s centralized procurement projects over the past months, thanks to the scanner’s superior performance.
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF performance tests (TS 38.141-1), according to Release 16, can be performed quickly and conveniently with signal generators from Rohde & Schwarz
24-Oct-2019 | AN-No. GFM315
Site acceptance and troubleshooting 5G NR site deployment – testing has never been so easy.
The latest version of the popular R&S®TS8980 RF test system now covers 5G NR. To enable over the air (OTA) testing for 5G NR mmWave, the solution includes the new R&S®ATS1800C compact antenna test range (CATR) and the R&S CMX500 radio communication tester providing NR FR2 signaling.