75 Results
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
Measurements on Bluetooth Devices using R&S CMU200 and CMUgo
06-Oct-2006 | AN-No. 1CM50
Unplug Bluetooth Low Energy testing reinvented - Flyer
28-Mar-2024
Rohde & Schwarz first to show measurements on novel Bluetooth® Channel Sounding signals for positioning accuracyRohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.
26-Apr-2013 | AN-No. 1GP72
To ensure connectivity and trouble-free operation, each Bluetooth® enabled device has to be tested for conformance with Bluetooth SIG standards and regulatory requirements.
23-Nov-2017
Rohde & Schwarz Operating Manual for the Bluetooth®Enhanced Data Rate and Bluetooth®5.0 application of the signal generator; option R&S®SMBV-K60, SMBV-K117
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
Rohde & Schwarz User Manual for the Bluetooth® application of the signal generator R&S®SMW200A; options R&S®SMW-K60, R&S®SMW-K117, R&S®SMW-K178.
Rohde & Schwarz User Manual for the Bluetooth®EDR application of the signal generator R&S®SMM100A; options R&S®SMM-K60, R&S®SMM-K117, R&S®SMM-K178.
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
Rohde & Schwarz user manual for the Bluetooth®EDR application of the R&S®SMBV100B; options R&S®SMBVB-K60, R&S®SMBVB-K117.
Bluetooth Transmitter Measurements without Connection Setup
04-Feb-2003 | AN-No. 1MA49
In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment. In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment.
Setting a CMW as a Bluetooth LE packet Generator
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans.
23-May-2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.
Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.
17-May-2018