Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1108 Results
Air Traffic Control (ATC) radar, military Air Traffic Surveillance (ATS) radar and meteorological radar operate in S-Band frequency range. In fact 4G communication systems such as Long Term Evolution (LTE) make also use of these frequencies. Test and measurement of their coexistence is absolutely essential as performance degradation of mobile devices and networks and even malfunction of ATC radars has been proven.This application note describes LTE and S-Band radar coexistence test and measurement. It addresses LTE user equipment, base stations and S-Band radars and presents test solutions.
28-Mar-2014 | AN-No. 1MA211
Testing the RF parameters of a WCDMA base station during the network rollout phase ensures subsequent trouble-free operation of networks as a basic prerequisite for general UMTS customer acceptance. This document describes a complete solution for testing the main transmission and reception parameters according to Specification 3GPP TS 25.141 FDD R99 on the basis of the R&S CMU300 Radio Communication Tester (RF measurements) and the NetHawk RNC/Iub Simulator (base station controller). The solution presented here is particularly recommended for installation measurements and regression tests on new UMTS system components.
15-Oct-2004 | AN-No. 1CM56
Characterizing RF mixers that have an internal LO using the value-of-three R&S®FPC1500 spectrum analyzer.
15-Oct-2018
During wireless transmission over the air a signal is subject to fading. Since fading can strongly influence the communication, devices such as mobile phones must be tested under real-world conditions to verify their performance. The Rohde & Schwarz vector signal generators R&S®SMW200A, R&S®SMU200A and R&S®AMU200A make it possible to perform such tests. Their integrated real-time fading simulators reproduce well-defined and repeatable real-world test scenarios to bring reality into your laboratory. A multitude of standard-compliant, preconfigured fading scenarios make the configuration as easy as possible.This application note gives a brief introduction to fading and explains how to use the fading simulators in custom applications.
26-Apr-2013 | AN-No. 1GP99
The 3GPP TS 36.521-1 “Radio transmission and reception” LTE User Equipment (UE) conformance specification defines the measurement procedures for LTE terminals with regard to their transmitting characteristics, receiving characteristics and performance requirements as part of the 3G Long Term Evolution (3G LTE) standard.This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality associated with the Downlink Carrier Aggregation feature of the R&S®CMW500 wideband radio communication tester to perform LTE R10 receiver measurements according to this test specification.
09-Apr-2015 | AN-No. 1CM103
Audio analyzers and test software from Rohde & Schwarz enable Dolby® licensees to subject their new products to the required compliance tests.
25-Jul-2014
Solution featuring the R&S®CMA180 radio test set and R&S®CMArun automation software
13-Mar-2019
Automotive Infotainment Testing
24-Apr-2018
Polar modulation is a method where digital modulation is realized as a combination of phase and amplitude modulation, rather than using an I/Q modulator. This technique becomes increasingly important in mobile communication. This application note shows how to generate polar modulation with an R&S®SMU200A Vector Signal Generator.
26-Nov-2004 | AN-No. 1GP58
The R&S®ZNB vector network analyzer is easy to configure and calibrate using the built-in intermodulation wizard.
19-Dec-2013
DOCSIS has become the established standard for return channels when it comes to implementing interactive services in broadband cable networks. The quality of these signals is essential to network efficiency. The analysis can be done using the highprecision R&S®ETL, R&S®EFA and R&S®FSH3-TV TV test receivers that have proven themselves in the downstream. These T & M instruments can be quickly and easily configured for measuring the upstream.
13-Jul-2012
This Application Note describes two easy ways of extracting the video content of MPEG-2 transport streams and storing it as video elementary streams. These elementary streams can later be used to generate customized MPEG-2 transport streams by means of the Advanced Stream Combiner R&S DVASC application.
21-Apr-2006 | AN-No. 7BM58
Vector Network Analyzers of the ZVR family measure magnitude and phase of complex S-parameters of a device under test (DUT) in the frequency domain. Using an inverse Fourier transform, the results can be transformed to the time domain. The impulse or step response of the DUT is obtained, which gives an especially clear representation of its characteristics. For instance, faults in cables can be directly localized. Moreover, special time domain filters, so-called gates, can be used to suppress unwanted signal components such as multireflections.
04-Aug-1998 | AN-No. 1EZ44
SMW200A, SMZ90, Pulse Sequencer software, vector signal generator, frequency multiplier, Automotive radar sensors, Testing automotive radars Testing automotive radars against norm interferers; The R&S ® Pulse Sequencer software simulates arbitrary RF environments and supports the generation of radar norm interferers to test automotive radars operating in the 24 GHz, 77 GHz and 79 GHz frequency band
20-Oct-2016
IEEE 802.15.4 (ZigBee) uses Offset QPSK with a half-sine pulse-shaping filter as modulation. This application note describes how to set up the Rohde & Schwarz signal analyzers together with the corresponding vector signal analysis (VSA) personality for modulation quality measurements, especially EVM, for ZigBee.
12-Dec-2014 | AN-No. 1EF55
Application Note 1MA104 shows you how to quickly and easily create TD-SCDMA test signals for user equipment and base station tests as stipulated in the standards TS 34.122 and TS 25.142.
10-May-2007 | AN-No. 1MA104
FSxRecordPlay is a program for recording the trace data in frequency and time domain from Rohde & Schwarz spectrum analyzers and measurement receivers via IEEE bus, LAN/Internet or internal remote control connection. The stream waveform data can be played back and analyzed directly in this software with variable speed.
20-May-2010 | AN-No. RAC-0605-0004
EMI debugging, FPC, FPC1000, FPC1500, EMC compliance test, EUT The combination of high power and current being sharply switched on and off has a lot of potential for EMI. EMI debugging a switched-mode power supply with R&S®FPC1000/ R&S®FPC1500 EMI debugging, FPC, FPC1000, FPC1500, EMC compliance test, EUT The combination of high power and current being sharply switched on and off has a lot of potential
30-Jun-2019
Due to its full IP system architecture and distributed infrastructure, the CERTIUM VCS is perfectly suited for integration into a virtual center.
10-Mar-2014
R&S AVBrun, Broadcasting and Multimedia T&M, UltraHD R&S AVBrun Conformance testing solution for MHL/HDMI CTS sink/source R&S®AVBrun - Conformance testing solution for MHL/HDMI CTS sink/source R&S AVBrun, Broadcasting and Multimedia T&M, UltraHD R&S AVBrun Conformance testing solution for MHL/HDMI CTS sink/source R&S®AVBrun - Conformance testing solution for MHL/HDMI CTS sink/source R&S AVBrun, Broadcasting
14-Sep-2015
During development of MU-MIMO antenna arrays, the beamforming algorithms undergo steady revision. Whether used in regression testing or verification of newly introduced features, fast beamforming verification helps to speed up R&D for beamforming antennas and improve performance of your product.
07-Jul-2020
The aim of this application note is to provide information regarding Rohde & Schwarz (R&S®) instrument drivers for R&S®CMU200. This document describes how to use the R&S®CMU200 VXIPlug&Play drivers in Microsoft Visual Basic.NET or C# using Visual Studio.
30-Jun-2009 | AN-No. 1MA157
The R&S®AREG100A automotive radar echo generator provides OEM test engineers with a powerful solution for reliable testing of automotive radar sensors during final inspection at the end of assembly lines.
13-Aug-2018
The R&S MATLAB® Toolkit for R&S® NRP-Z Sensors provides routines for remote controlling these instruments via USB or the R&S® NRP Power Meter. This application note describes how to access the sensors using the R&S® VXI PnP driver. It also contains a set of scripts that perform commonly needed tasks, such as opening a sensor connection or performing measurements.
05-Mar-2011 | AN-No. 1GP61
This application note describes how to use two or more Arbitrary-/Function Generators R&S® AM300 to generate multi-phase-sychronized signals, which are required in some applications.
27-Jun-2007 | AN-No. RAC-0705-0038
This Application Note briefly explains the theoretical background regarding phase noise before describing the phase noise option for the R&S SFU. You will see how the phase noise profile creator application software can be used to generate specific phase noise curves and how to output them with the aid of the R&S SFU.
22-Aug-2007 | AN-No. 7BM63
Using a Vector Network Analyzer from the ZVR family, not only magnitude and phase can be measured, but also group delay and even phase delay. Whereas phase delay measurements produce the highest accuracy for the electrical length of non-dispersive devices under test, such as coaxial cables, group delay measurements also give a detailed insight into the frequency dependent delay characteristics of dispersive devices, such as filters. In addition to the traditional step aperture technique, Vector Network Analyzers from the ZVR family offer a frequency aperture technique, which allows a well defined and constant aperture for group delay measurements also for a nonlinear frequency sweep.
28-Jul-1998 | AN-No. 1EZ35
How I/Q noise cancellation can help significantly improve the EVM performance of your signal and spectrum analyzer.
16-Nov-2023
The Rohde & Schwarz power consumption analysis tool helps evaluate power consumption data collected with Rohde & Schwarz power supplies.
01-May-2023