1817 Results
This application note focusses on signal measurement using the R&S®RTO digital oscilloscopes ant the output of I/Q data for processing.
18-Oct-2016 | AN-No. 1MA249
MXO 4 - See the difference Quickly and reliably trigger and decode packets from your SPI bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger or display the decode table. Quickly and reliably trigger and decode packets from your SPI bus using either the analog or digital channels as serial bus inputs.
Also the setup using the PoE switch is introduced. This video provides an introduction to the R&S®NRQ6 frequency-selective power sensor and how to configure it for many common measurement applications. Examples are trace and ACLR measurements. Also the setup using the PoE switch is introduced.
Find out how it works and how to analyze LoRa signals using the R&S®RTO oscilloscope.
R&S®SMA100B Signal Generator - Application Video This video presents how easy it is to generate narrow pulses using the R&S®SMA100B. Closed-loop level controlled narrow pulses with high level accuracy and repeatability This video presents how easy it is to generate narrow pulses using the R&S®SMA100B.
R&S®ESMD Increasing timestamp accuracy in TDOA applications - Application Card
30-Apr-2013
Creating your own “smart” low-noise amplifier
18-Mar-2019
Simplifying mixer measurements with the R&S ZNB
01-Oct-2013
The R&S®SMA100B offers outputs for the analog input signal of the ADC as well as the clock input signal in one single instrument - both with outstanding signal purity.
11-Jan-2021 | AN-No. 1GP66
LTE (long term evolution) is an advanced and complex technology that uses two different transmission schemes in the downlink and the uplink. LTE also specifies the support of different frequency bands, a subset of six bandwidths and different modes (FDD and TDD) – a challenge for chipset vendors and device manufacturers alike.
Measurements of Dual-tone Multifrequency Dialling Signals with the Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA23
Swept Adjacent Channel Power Analysis on Digital TV Amplifiers
16-Oct-2001 | AN-No. 1MA43
The R&S®FSW signal and spectrum analyzer is a high-performance instrument capable of measuring many key system and component parameters. Using the bit error rate (BER) functionality of the R&S®FSW-K70P option, the raw data error performance of a component or system can be accurately determined.
26-Sep-2018
The R&S®SMB100A analog signal generator is the ideal calibration source for weather radar receivers due to its highly accurate output level.
25-Jan-2011
Carrier Aggregation for IEEE 802.16m. Signal Generation and Analysis
22-Mar-2010 | AN-No. 1MA173
14-Mar-2023
CAICT selected R&S CMX500 OBT to enable SPEAG DASY8 system for SAR and HAC tests of 5G NR devicesThe China Telecommunication Technology Labs (CTTL) Terminal labs at the China Academy of Information and Communications Technology (CAICT) successfully conducted specific absorption rate and hearing aid compatibility testing for 5G new radio mobile devices. The lab upgraded their DASY8 high-precision electromagnetic near-field scanning platform from SPEAG, the leading provider of dosimetric test systems, with the R&S CMX500 OBT 5G one-box signaling tester from Rohde & Schwarz. SPEAG and Rohde & Schwarz have been long-term partners with CAICT and have supported and equipped CTTL with testing solutions and provided support.
08-Jun-2022
Rohde & Schwarz presents its full range of embedded systems test solutions at embedded world 2022Nuremberg will be home to the international embedded industry once again during embedded world Exhibition & Conference. Rohde & Schwarz will be showing its latest test solutions from June 21 to 23, 2022 at booth 4-218 of Nuremberg Exhibition Centre. There, visitors can experience product highlights like the new generation of the R&S RTP high-performance oscilloscope, and they can learn from the Rohde & Schwarz experts about state-of-the art test solutions for all kinds of embedded systems.
The measurements are made using the R&S®ZVA vector network analyzer equipped with the R&S®ZVA-K9 embedded LO mixer delay measurements option from Rohde & Schwarz. Based on a unique and novel two-tone method, mixers and frequency converters can be characterized in a very simple and convenient way.
See how you can replay a snapshot recording inside the R&S®ESMD, using all the functions that are also available in the live mode, such as level measurement, demodulation or DDC operation. See how you can replay a snapshot recording inside the R&S®ESMD, using all the functions that are also available in the live mode, such as level measurement, demodulation or DDC operation.
See how the China Academy of Information and Communication Technology (CAICT) conducts certification tests using test equipment from Rohde & Schwarz C-V2X, CAICT, conformance test See how the China Academy of Information and Communication Technology (CAICT) conducts certification tests using test equipment from Rohde & Schwarz.
The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT. The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT.
With the release of the TSME44DC scanner downconverter, operators now have the ability to passively capture network LTE and 5G performance and quality data from the air interface, offering a pure and accurate view of the RF metrics and MIB/SIB/Layer 3 messages up to 44 GHz covering milimetric frequncy bands used by 5G.
This video shows the generation and analysis of a 5G New Radio signal at 28 GHz using the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer.
Seamless integration of legacy applications The R&S®GW5440 Universal Media Gateway is a flexible system of media and server cards used as a radio, VCS and telephony gateway. The Universal Media Gateway is a flexible system of media and server cards used as a radio, VCS and telephony gateway with E&M interfaces as well as analog and digital telephone lines via various interfaces.
This new all-in-one solution supports the generation and analysis of RF signals for all commonly used broadcast standards in one single instrument. This new all-in-one solution supports the generation and analysis of RF signals for all commonly used broadcast standards in one single instrument. The customized, cost-saving approach simplifies quality assurance in high-volume production.
This new all-in-one solution supports the generation and analysis of RF signals for all commonly used broadcast standards in one single instrument. This new all-in-one solution supports the generation and analysis of RF signals for all commonly used broadcast standards in one single instrument. The customized, cost-saving approach simplifies quality assurance in high-volume production.
5G NR physical layer parameters using the 5G NR generation.
How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE.
12-Jan-2022
09-Sep-2021
Rohde & Schwarz introduces R&S VSESIM-VSS that combines EDA simulation with hardware testingT&M expert Rohde & Schwarz and Cadence have collaborated on a solution aimed at simplifying the engineering process from RF design to implementation and enhancing accuracy by using realistic signals for both simulation and testing. The new R&S VSESIM-VSS signal creation and analysis tool speeds up the development process for RF components. It is particularly useful for customers in the wireless, automotive, and aerospace and defense industries as well as for manufacturers of active components and systems.
Quickly and reliably trigger and decode packets from your I2C bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.