1817 Results
Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines.
Using the R&S®ZVA eliminates the need for a calibrated noise source and impedance tuners. ZVAB-K30, vector network analyzer, This video demonstrates the simple and straight-forward calibration steps including power calibration of source and receivers, noise figure calibration and more.
In this video we show a powerful way to perform radial velocity and range measurements using Rohde & Schwarz instruments as well as signal processing software implemented in MATLAB. In this video we show a powerful way to perform radial velocity and range measurements using Rohde & Schwarz instruments as well as signal processing software implemented in MATLAB.
Quickly and reliably trigger and decode packets from your LIN bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
Using the Y-factor method, noise figure and gain are measured with high accuracy. video, spectrum analyzer, FPL1000, FPL1-K30, gain, noise figure The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K30 option measures the noise figure and gain of components such as low noise amplifiers (LNAs).
In this video we explore how to set up Rohde & Schwarz signal generators and spectrum analyzers to characterize a 5G power amplifier using 5G waveform candidates, such as FBMC, UFMC or GFDM. In this video we explore how to set up Rohde & Schwarz signal generators and spectrum analyzers to characterize a 5G power amplifier using 5G waveform candidates, such as FBMC, UFMC or GFDM.
The video demonstrates Bluetooth Low Energy RF measurements with Direct Test Mode (DTM) using the R&S®CMW wireless communications platform and the Nordic nRF52 development kit as an example. The video demonstrates Bluetooth Low Energy RF measurements with Direct Test Mode (DTM) using the R&S®CMW wireless communications platform and the Nordic nRF52 development kit as an example.
R&S®ZNBT, ZNBT, Vector Network Analyzers This video demonstrates testing multiple devices in parallel using a true multiport analyzer and shows the advantages compared to a switched matrix solution, including a significant reduction in measurement time.
Quickly and reliably trigger and decode packets from your RS232 or RS485 buses using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the data format or display a decode table.
22-Jul-2020
Rohde & Schwarz presents economy vector signal generator for the automotive, IoT and education sectorsRohde & Schwarz presents economy vector signal generator for the automotive, IoT and education sectors.
Additionally, and equally importantly, it will show how the quality of the video transmission links can be measured under real-life propagation conditions and which metrics can be used to accomplish this task.
Rohde & Schwarz offers a powerful tool for remote control of their oscilloscopes - the RsInstrument Python module. This module enables users to control and automate their Rohde & Schwarz test & measurement instruments, including oscilloscopes, through Python scripts or interactive console communication.
14-Dec-2023
This Application Note describes the operating principle of DME (Distance Measurement Equipment) that is used for distance measurement in aviation. It also describes various test scenarios for the maintenance of a DME transponder.
26-Feb-2009 | AN-No. 1GP74
Noise Figure Measurements on Amplifiers in Pulsed Mode
19-Dec-2000 | AN-No. 1MA32
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and R&S®ZNBT families.
11-Jul-2019 | AN-No. 1EZ82
Vector Network Analyzers of t ZNA and ZNB family are able to measure magnitude and phase of complex S-parameters of a device under test (DUT) in the frequency domain.
30-Jul-2020 | AN-No. 1EP83
Define up to eight zones of any shape and logically combine them over multiple channels or by using math functions. Define up to eight zones of any shape and logically combine them over multiple channels or by using math functions. Depending on how the zones are defined, a trigger signal is activated when a signal either intersects or does not intersect the zone.
This includes basic interference hunting using spectrum analyzers, expert interference hunting using real-time receivers, and automatic direction finding and emitter location using radiolocation software.
The video demonstrates how to quickly verify components with different important 5G NR physical layer parameters using the 5G NR generation and analysis options of the R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer. 5G NR Signal Generation and Analysis | Rohde & Schwarz Quickly verify components with different important 5G NR physical layer parameters using the SMW200A
A component tester and an oscilloscope can be used to examine whether components are defective or functional. A component tester and an oscilloscope can be used to examine whether components are defective or functional. By using a component tester capacitors, resistors, transistors, thyristors, coils, zener diodes, diodes and resulting circuits such as rectifiers are tested.
This video shows how the R&S RTO oscilloscope can be used with a near- field probe to quickly and reliably find and fix EMI issues during development in the R&D lab to effectively minimize expensive re-testing and shorten the time to market. video, solution, oscilloscope, EMI, RTO This video shows how the R&S®RTO oscilloscope can be used with a near field probe to find and fix EMI issues quickly and
It will also provide insights about the TD-LTE challenges for using only one frequency and separating reception and transmission in time.
In this video we describe how to generate a scrambled bit sequence using the LTE standard. Even 5G waveform candidates, such as FBMC, UFMC and GFDM, are based on OFDM, they are pure physical layer concepts that lack of a fully defined scrambling method. This results in a varying peak-to-average power ratio (PAPR) depending on the used payload data which are typically pseudo noise (PN) sequences.
A combination of the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer equipped with the R&S®FSW-K19 option can be used to characterize two-port devices such as satellite transponders, power amplifiers and converters.
This webinar gives an overview about requirements and tools used to test high throughput and VoNR in 5G with regard to functionality, quality of service and other relevant parameters in the lab before bringing a device to market. 5G, Voice over NR, VoNR This webinar gives an overview about requirements and tools used to test high throughput and VoNR in 5G before bringing a device to market.
This video shows how you can precisely characterize the ESR and ESL of electric vehicle traction inverter DC-link capacitors over a frequency range of interest using the Zurich Instruments MFIA impedance analyzer.
Battery cycle tool for the R&S®NGU401/NGU201/NGM200/NGL200
02-May-2023
This look up table can be calculated once and used multiple times in automatic test scripts to measure the performance of the chipset in isolation. UWB, Ultra-Wideband, development testing, NXP, automotive chipset This video shows a practical demonstration of how to measure UWB automotive IC using an R&S®CMP200 and the R&S®ATS800R.
A high frequency transformer is a key component when designing isolated switching mode power supplies (SMPS). Leakage inductance is essential in the control of many design parameters including efficiency, maximum voltage rating for switching elements and EMI when it comes to designs using customized transformers. Accurate measurement of this parasitic element is mandatory. The R&S®LCX LCR meter is ideal for this challenging measurement task.
15-Feb-2022