Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1113 Results
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
The R&S®RTO6 oscilloscope has an in-depth tool for debugging custom and commercial off-the-shelf serial buses for the avionics and aerospace industries.
20-Dec-2023
In addition to the generic edge trigger, modern oscilloscopes offer triggers that are specialized to address specific problems.
04-Jan-2016
Road safety is a global challenge at present and will be in the future. Automotive radar has become a keyword in this area and pushes again a step forward to increase driving comfort, crash prevention and even automated driving.Driver assistance systems which are supported by radar are already common. Most assistant systems are increasing the drivers comfort by collision warning systems, blind-spot monitoring, adaptive cruise control, lane-change assistance, rear cross-traffic alerts and back-up parking assistance.Today's 24 GHz, 77 GHz and 79 GHz radar sensors clearly need the capability to distinguish between different objects and offer high range resolution. That is possible with increased signal bandwidth.Furthermore, those radar systems need to cope with interference of many kinds like the one from other car's radar.This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages. It also shows a setup to verify the functionality of a radar in case of radio interference.
10-Jun-2016 | AN-No. 1MA267
EMI compliance is becoming a major concern for advanced power electronics due to increasing switching speeds. Correlated time-frequency measurements help optimize gate driving and minimize electromagnetic emissions early on during development.
27-Apr-2023
This Application Note describes how to perform measurements on power amplifiers for TD-SCDMA base stations to specification TS 25.142 using Rohde & Schwarz generators, power meters and signal/spectrum analyzers. The TD-SCDMA application firmware for Rohde & Schwarz generators and analyzers as well as their outstanding performance facilitate efficient and rapid measurements.
31-Jul-2007 | AN-No. 1MA103
This application note shows how to perform Bluetooth transmitter measurements with the CMU200 in a reduced signaling mode, in which the protocol handshake between the Bluetooth Equipment Under Test, the EUT, and CMU200 is skipped. This additional CMU200 feature allows both more flexible and faster RF testing of Bluetooth modules. A step-by-step example with SMIQ demonstrates the principles and serves as a reference for integrating this method in user-specific test strategies.
04-Feb-2003 | AN-No. 1MA49
With SMIQ Signal Generator you can generate the most important Bluetooth RF test signals fast and conveniently. This application note comes with files containing modulation data for various payload patterns and burst lengths. A list of patterns is included. With the transfer software, also enclosed with this application note, you can load the data records into SMIQ and start testing immediately. BLUETOOTH is a registered trademark of Telefonaktiebolaget L M Ericsson, Sweden.
30-Jan-2001 | AN-No. 1MA31
This application note describes how Bluetooth devices are tested and measured using the R&S CMU200/CBT by means of the CMUgo/CBTgo remote control program or manual operation.
06-Oct-2006 | AN-No. 1CM50
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.With the R&S®CMW-KD611 software option, the R&S CMW tester is able to perform a large number of Bluetooth Low Energy RF tests without operating in the Direct Test Mode.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license.
14-Dec-2020 | AN-No. 1C109
Designing and implementing an active phased array antenna requires precise characterization of individual components and the integrated performance of the array. To ensure an accurate test of the intended adaptive nature of the active phased array antenna, the embedded algorithms need to be tested as well.This application note aims to explain test procedures and give recommendations towards characterization of the relevant parameters for active phased array antennas and their passive subsystem, as often used in applications for Mobile Communication and RADAR. This application note describes transmit signal quality testing, multi-element amplitude and phase measurement techniques both in receive and transmit cases and introduces a new automated test methodology antenna radiation pattern measurement over frequency. This paper also describes the test system used for transmit and receive module (TRM) characterization in active array antennas.
04-Jul-2016 | AN-No. 1MA248
This application note describes remote operation or monitoring of the signal and spectrum analyzers R&S® FSV3, R&S® FSV7, R&S® FSV13, R&S® FSV30 through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
15-Jan-2009 | AN-No. 1EF67
This application note is based on collaborative work between Cadence and Rohde & Schwarz.The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices, in our case the RF power amplifier (PA). In other words, what performance benefits can be reached with linearization techniques such as digital predistortion (DPD). Typically, this is investigated when the device is available and physical RF measurements are conducted. In this application note, it is looked at earlier in the design process while using electronic design automation (EDA) such as Cadence® AWR® Visual System Simulator™ (VSS) software. The goal is to allow an RF designer to evaluate the linearizability of his design without in-depth knowledge of DPD algorithms. In the end, the designer can get closer to the optimal efficiency with earlier access to DPD, while at the same time improving time-to-market.The application note brings code examples and an exemplary setup for VSS software to provide an easy start to replicate and use the described procedure.
20-Apr-2022 | AN-No. 1SL383
Connecting simulation and measurements on physical devices
This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier. It is shown how simulation and the integrated functions of the Rohde & Schwarz instruments R&S®SMW200A and R&S®FSW work hand-in-hand with the simulation capabilities from MathWorks in MATLAB / Simulink. The goal is to provide a toolset to enable proper modeling and linearization approaches to optimize and verify the behavior of the power amplifier when used with complex wideband signals as used in 5G NR or latest satellite links.The application note brings code examples and an exemplary block set for MATLAB / Simulink to provide an easy start to replicate and use the described procedure.
05-Aug-2021 | AN-No. 1SL371
Current Radar development is focusing the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system, performing radar detection by means of pulse compression and digital signal processing. Appropriate Rohde & Schwarz sofware tools for such applications are described as well as the interface between the tools and the test instruments. Target reader group are engineering students who want to perform tests using pulsed or chirped signals.
20-Nov-2014 | AN-No. 1MA234
The R&S®FSW offers a variety of different bandwidth options and makes it possible to combine these with external harmonic mixers to enlarge the analyzer’s frequency range up to 325 GHz. This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.
16-Jun-2020
Today’s digital designs and high-speed data converters require clean clocks with minimal jitter
03-Aug-2017
This application note describes the suitability of the R&S®ZVM and R&S®ZVK as multichannel microwave receivers for antenna measurements and RCS measurements including measurements on pulsed signals. Application examples describe the measurement possibilities on pulsed signals using the R&S®ZVM/ZVK as stand-alone units. In addition, various R&S®ZVM/ZVK-based antenna measurement systems of the March Microwave company are presented in detail.
10-Sep-2004 | AN-No. 1EZ52
Spurious emission search with spectrum analyzers is one of the most demanding measurements in the design, verification and production of RF and microwave devices. RF designers, especially in the aerospace & defense industry need to detect very low level spurs. Very narrow resolution bandwidths are required to measure with a low noise floor, hence increasing measurement time. Even working with very fast spectrum analyzers, a spur search may take several hours or even days.In this paper we will review the basics of spurious measurements and how the parameters used can affect the detection performance. A new technique as used in the R&S®FSW-K50 spurious measurement application which makes spurious search faster and easier to configure.
14-Jul-2017 | AN-No. 1EF97
The R&S®SMBV100A is both, a versatile general-purpose vector signal generator and a powerful GNSS signal simulator. It can simulate up to 24 satellites in realtime for testing GNSS receivers flexibly, reliably, and cost-efficiently. The R&S®SMBV100A supports receiver testing under realistic conditions by offering features such as obscuration simulation and automatic multipath generation. Out of a multitude of possible test scenarios – with predefined or user-specific settings – this application note presents some examples to give an impression of the instrument’s capabilities.
19-Apr-2018 | AN-No. 1GP101
This application notes describes remote operation or monitoring of the spectrum analyzers R&S® FSL3, R&S® FSL6, R&S® FSL18 through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
07-Jan-2009 | AN-No. 1EF66
This application note belongs to a series of application notes which explains how to test EW receivers at RF in the lab with commercial, off-the-shelf signal generators and software. The series will cover all relevant use cases. This application note will discuss threat simulation and verification. Further application notes will address calibration and verification of multi-channel setups for simulation of angle of arrival, generation of radar signals in a hardware in the loop (HIL) environment with PDW Streaming, and automated threat creation and sequencing.
23-Mar-2021 | AN-No. 1GP123
With the start and spread of 5G communications services and new form factors such as wearables and foldable phones, an increasing number of flexible printed circuit boards (PCB) that support high frequency signals are being produced. These boards must exhibit excellent frequency characteristics. In the past, a PCB’s frequency characteristics were subjected to sampling inspection using a test coupon. For flexible PCBs, a new method is needed to provide repeatable and proper verification. The Yamaha® MP Series combined with the R&S®ZNBT vector network analyzer measure the high frequency characteristics of a production lot at high speed and high accuracy, enabling 100 % measurement of mass produced rigid and flexible PCBs.
27-Jan-2020
The constantly decreasing size of components and the available board space form a challenge to place adequate test connections for RF instruments. Recent improvements in the availability and use of high performance differential building blocks in RF circuits intensify the problems of connecting test equipment. Using oscilloscope probes is a possibility to perform measurements by connecting to printed circuit board lines and chip contacts where only a minimal area is required to make contact. This application note provides information on how to use oscilloscope probes in RF measurements using spectrum analyzers, and show the results of differential measurements with a spectrum analyzer.
28-Jun-2013 | AN-No. 1EF84
Power Added Efficiency (PAE) is a key parameter for the characterization of an amplifier.This application notes introduces two alternative methods how to do the Power Added Efficiency measurement. The first one is based on the R&S ZNB vector network analyzer (VNA) measurement function. Alternatively to this, the PAE tracer macro is introduced. This macro offers to make the PAE at an user selected compression point of the amplifier versus frequency. The PAE tracer macro is provided together with this application note.
22-May-2013 | AN-No. 1EZ64
The R&S®TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface. The individual transport streams result in a high overall bit rate. To make the streams available on a standard PC, the R&S®TSStream software does not play the transport stream files directly from the hard disk but first loads them into the RAM. The maximum number and length of the transport streams depends solely on the PC's available RAM.
16-Mar-2017 | AN-No. 1GP113
Noise Power Ratio Signal Generation and Measurement
Noise Power Ratio (NPR) is an add-on tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device under test (DUT) using Rohde & Schwarz instruments via LAN or GPIB bus.
06-Nov-2015 | AN-No. 1MA29
Vector Network Analyzers (VNA) are gaining popularity in the Signal Integrity community as time domain measurement and analysis tools. VNAs with 8 ports or more can provide significant decreases in test time by migrating from a 4-port measurement system to an 8-port measurement system. For tight tolerance DUTs that are barely within the test limit lines, small increases in accuracy can be realized by testing all of the test parameters at once, because the entire test setup is at the same temperature. This application note discusses the thermal advantages of testing an 8-port DUT with the R&S ZNBT VNA. The use of the ZNBT to assess and debug two differential pairs in a 20-inch backplane is presented.
18-Mar-2020 | AN-No. 1EZ83_0E
With advances in digital signal processing techniques modern wireless communications systems and radar systems have become increasingly digital and more constraints have been placed on packing more information into less and less bandwidth. On the wireless side, modulation formats have become more complicated with less margin for symbol error. On the radar side, modern radar systems are trying to extract more information about the targets they track and provide the ability to track slow moving targets such as automobiles and personnel in the presence of clutter.For both communications and radar systems one of the key RF parameters that limits system performance is phase noise. As systems engineers develop new and more advanced RF systems, phase noise of oscillators and transmitters can no longer be overlooked.This application note will focus on phase noise measurements for pulsed RF carriers such as those used for radar systems. We will address some of the physical limitations relating to pulsed phase noise measurement and introduce the capabilities of the new Rohde & Schwarz FSWP phase noise analyzer.
18-May-2016 | AN-No. 1EF94
The R&S®SMW-K546 software option aids the optimum design of multiple path amplifiers, including Doherty Amplifiers.This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.The software and associated techniques may similarly be used to develop other quasi-linear, multi-path amplifiers; including Balanced, Anti-Phase (so-called Push-Pull), Distributed, Spatially Combined, Load Modulated Balanced and many more.
13-Jul-2020 | AN-No. GFM345