75 Results
Rohde & Schwarz user manual for the R&S®FSV3-K8 Bluetooth application; provides all the information specific to the application. All general instrument functions and settings common to all applications are described in the main R&S FSV3000 user manual.
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
Bluetooth Transmitter Measurements without Connection Setup
04-Feb-2003 | AN-No. 1MA49
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error. video, signal analyzer, FPL, VSE In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error.
Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.
17-May-2018
Generating Bluetooth RF Test Signals with SMIQ Signal Generator
30-Jan-2001 | AN-No. 1MA31
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S®CBTgo software.
18-Jul-2013 | AN-No. 1MA200
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.
21-Feb-2024
Rohde & Schwarz first to test 5G eCall interoperability of Quectel’s 5G module with its wideband radio communication testerQuectel Wireless Solutions, a global IoT solutions provider, and Rohde & Schwarz have successfully validated Quectel’s innovative 5G eCall module, part of the AG56xN series of automotive modules. For the test, the R&S CMX500 wideband radio communication tester has been used. The test setup will be shown at Mobile World Congress 2024.
09-Jul-2024
EMITE and Rohde & Schwarz join forces to support OTA measurements on Wi-Fi 7 and 5G RedCapEMITE and Rohde & Schwarz continue their collaboration to enhance EMITE’s Over-the-Air (OTA) measurement solutions by fully integrating the latest test capabilities of the R&S CMX500 multi-technology, multi-channel one-box signaling tester.
This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.
30-Oct-2019 | AN-No. GFM327
IoT: Wireless interfaces in electronic designs, Bluetooth 5, Wi-Fi 6 Learn about the main challenges of these wireless IoT interfaces as well as their impact on the rest of your design and how multi-domain testing can simplify your IoT journey.
Conducted multistandard in-device coexistence testing - ApplicationCard
19-Feb-2018
This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured.
28-Apr-2015 | AN-No. 1MA255
Bluetooth(TM) qualification in development and quality assurance
Bluetooth(TM) Analysis Software Option (OPT.66) - Specifications
R&S®CBT / CBT32 Bluetooth® Tester - Product Brochure
R&S®FSV-K8 Bluetooth<sup>®</sup>/EDR Measurement Application Firmware - Specifications
An automated test solution based on the R&S®CMW wideband radio communication tester fully supports the new test cases for real-time submeter positioning.
10-Jun-2022
Rohde & Schwarz user manual for the R&S®VSE-K8 Bluetooth application; provides all the information specific to the application. All general software functions and settings common to all applications are described in the main R&S VSE user manual.
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
26-Jan-2021
R&S SMM100A vector signal generator redefines midrange signal generation for 5G, Wi-Fi 6E and much moreRohde & Schwarz introduces the R&S SMM100A, the only vector signal generator with mmWave testing capabilities in its class. The instrument meets the rigorous expectations for generating digital signals for the most advanced wireless communication devices entering production, as well as for developing future products and technologies.