222 Results
To allow optimization early on in the R&D lab, Rohde & Schwarz provides a free tool to simplify conducted emissions debugging using oscilloscopes.
27-Sep-2021 | AN-No. 1SL372
This application note provides an introduction to the DDR memory technology and explains common challenges, related to the specific nature of DDR data, command and control buses.
30-Oct-2020 | AN-No. GFM340
Analyzing automotive radar signals with an oscilloscope - eGuide - Miscellaneous
Instrument Health Guide For benchtop oscilloscopes - Brochure Brochures and Data Sheets Brochure
Oscilloscope, RTP High-performance oscilloscope, Automotive Radar, Pulse Analysis, Demodulation, Mixer, Downconversion Demodulate radar pulses with built-in oscilloscope functions.
Oscilloscope, RTP High-performance oscilloscope, Automotive Radar, Pulse Analysis, Deembedding, Mixer, Downconversion Deembed mixers and other setup components in realtime.
Oscilloscope, RTP High-performance oscilloscope, Automotive Radar, Pulse Analysis, MIMO, phase-coherant, Mixer, Downconversion Perform phase-coherent measurements on multiple antenna signals.
Test and measurement solutions for medical and health applications - Brochure
Oscilloscope, RTP High-performance oscilloscope, Integral waveform, Pulsed signal, math function Remove 1/f noise in an integral math waveform for analyzing sinusoidal or pulsed signas with advanced math functions.
This document provides the technical specifications of the R&S®RT-Zxx high voltage and current probes
RF signal analysis with Rohde & Schwarz spectrum analyzers and oscilloscopes - Application Brochure
EMI Debugging with the R&S RTO and R&S RTE Oscilloscopes
25-Jun-2014 | AN-No. 1TD05
The new R&S FE110ST/SR TX/RX frontends extend the frequency range of Rohde & Schwarz signal sources such as the R&S SMW200A vector signal generator and signal analysis instruments such as the R&S RTP oscilloscope to cover the W band from 70 GHz to 110 GHz. They complement the company’s portfolio of easy-to-mount frontends.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and key components. 5G base station, SMA100B, RTP, differential clock, timing alignment, delay adjustment, SYSREF, sampling clock, ADC, DAC The video demonstrates a clock generator from IDT and shows the measurement of time alignment and delay adjustment of SYSREF and sampling clock
Testing the world’s first quantum error correction stack
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.
08-Dec-2021 | AN-No. 1SL375
Generating models with a VNA and using these on an oscilloscope via the deembedding
23-May-2023 | AN-No. 1SL393
R&S®Forum for Instrument Remote Control
28-Jun-2018 | AN-No. 1MA196
The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.
19-Oct-2020
Characterize radar warning receivers with advanced triggerbased multichannel pulse analysis, using the R&S®VSE-K6A and a Rohde & Schwarz oscilloscope.
02-Mar-2021
This paper explains how to use the Rohde & Schwarz IVI.NET instrument drivers in a Visual Studio environment.
31-May-2016 | AN-No. 1MA268
The R&S®VSE is a powerful tool for comprehensive analysis of a variety of signals, providing full support to the Rohde & Schwarz oscilloscope advanced trigger system.
03-Feb-2021
Signal model based approach to joint jitter and noise decomposition - First published at DesignCon 2020 - White Paper
09-Nov-2022
Rohde & Schwarz next generation oscilloscope R&S MXO 4 on center stage at electronica 2022Rohde & Schwarz showcases at electronica 2022 (booth A3.307) the new R&S MXO 4 oscilloscope plus a wide range of test and measurement solutions tailored to developers and test engineers.
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.
26-May-2020 | AN-No. 1DC02
Verify the energy efficiency of your O-RAN radio units
19-Mar-2024
This document provides: - An explanation of analog versus digital triggering architectures - User advantages for oscilloscopes that have digital triggering - How to determine if an oscilloscope has a digital or analog trigger
Selecting your next oscilloscope: Why fast update rate matters | 选择下一代示波器: 为什么更高的波形捕获率很重要 - White Paper Brochures and Data Sheets White Paper
本白皮书包含以下内容:- 模拟和数字触发架构 - 数字触发示波器的优势 - 如何辨别数字或模拟触发示波器