8304 Results
GSM Mobile Tests under Conditions of Fading
07-Nov-1997 | AN-No. 1MA02
Test solution for multi-antenna EW receivers
22-Dec-2021 | AN-No. 1GP125
The most common abbreviations used in the standards for digital TV: MPEG2, DVB and ATSC
20-Jul-2001 | AN-No. 7BM27
WiMAX: IEEE 802.16e-2005 Introduction to OFDMA Measurements
23-May-2007 | AN-No. 1EF58
This application note describes how to use the generic interface in R&S®AdVISE for remote operation.
19-Jun-2020 | AN-No. 1S002
Pulse Train Master for the R&S Signal Generators
10-May-2011 | AN-No. 1MA148
Automatic Emitter Creation from User Data for Mission Data File Testing
01-Jul-2021 | AN-No. 1GP131
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
This application note is a systematic guide to help test engineers configure the Vector Network Analyzer in order to perform compliance test on Automotive Ethernet cables according to the Open Alliance TC9 standard.
13-Aug-2019 | AN-No. GFM323
Conducted multistandard in-device coexistence testing - ApplicationCard
19-Feb-2018
Models: R&S®TLU9 Transmitter 5 W, R&S®TLU9 Transmitter 10 W, R&S®TLU9 Transmitter 15 W, R&S®TLU9 Transmitter 25 W, R&S®TLU9 Transmitter 50 W, R&S®TLU9 Transmitter 100 W, R&S®TLU9 Transmitter 200 W, R&S®TLU9 GapFiller 5 W, R&S®TLU9 GapFiller 10 W, R&S®TLU9 GapFiller 15 W, R&S®TLU9 GapFiller 25 W, R&S®TLU9 GapFiller 50 W, R&S®TLU9 GapFiller 100 W, R&S®TLU9 GapFiller 200 W
R&S®CMWcards is an intuitive and user-friendly software application that makes NB-IoT OTDOA positioning design verification easier than ever.
26-Nov-2018
In this application note we discuss potential 5G waveform candidates, list their advantages and disadvantages and compare them to OFDM.
10-Jun-2016 | AN-No. 1MA271
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,
01-Aug-2017 | AN-No. 1MA289
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
16-Jun-2015 | AN-No. 1EF92
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
To ensure connectivity and trouble-free operation, each Bluetooth® enabled device has to be tested for conformance with Bluetooth SIG standards and regulatory requirements.
23-Nov-2017
A common 1 GHz reference signal maintains high phase stability between the RF outputs of multiple R&S®SGT100A SGMA vector RF sources.
09-Jan-2017
This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.
30-Oct-2019 | AN-No. GFM327
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
Comprehensive test solutions guide for production and R&D
Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.
19-Jun-2023 | AN-No. 1SL395
High-Speed Remote Control
12-May-2016 | AN-No. 1GP107
Perform DPD on a vector signal generator for improved EVM performance
28-Aug-2023 | AN-No. 1GP139
Functional Testing
This application note focuses on different details of voice services in 5G networks. It also describes the procedure to setup a 5G network with radio communication testers.
06-Oct-2021 | AN-No. 1SL364
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
26-Jun-2020 | AN-No. GFM343
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017