4394 Results
Feedthroughs are used to run cables from the outside into a shielded environment such as an RF shielded box or an OTA chamber. This is done to maintain the shielding effectiveness of a given environment and prevent leakage of RF radiation into or out of the chamber.
The R&S®ADD119 mobile HF DF antenna is optimized for radiolocation from mobile and transportable spectrum monitoring stations and COMINT/CESM platforms. It is designed for operation with Rohde & Schwarz single-channel and multichannel direction finders and suitable for the reception of ground waves and low-angle sky waves.
The R&S®CMQ shielding cube is a compact shielding solution for RF parametric testing. The turnkey chambers for direct far field over-the-air (OTA) measurements are ideal for testing antennas, modules and devices throughout the entire lifecycle under comparable measurement conditions: from product design to the production line.
R&S RT-ZPR20 Verifying power integrity for DDR memories - Application Card
The R&S®TSME6 is designed for efficient drive and walk tests with a maximum degree of freedom and upgradability. With its ultracompact design and multiband and multitechnology support for simultaneous measurements, the scanner fulfills all requirements for a state-of-the-art measurement tool.
In addition, the emergence of private 5G networks for manufacturing, warehouses, ports, etc. brings forth new stakeholders with more demanding performance and quality requirements. With our wide interference hunting portfolio, R&S covers the needs of interference hunting specialists as well as field technicians occasionally searing for external interference sources.
This application note belongs to a series of application notes which explains how to test EW receivers at RF in the lab with commercial, off-the-shelf signal generators and software.
23-Mar-2021 | AN-No. 1GP123
RF chipset verification for UMTS LTE (FDD) with R&S<sup>®</sup>SMU200A and R&S<sup>®</sup>FSQ
19-Dec-2008 | AN-No. 1MA138
Software tool for fast and repeatable optimization of signal analyzer RF front-end settings
The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.
24-Jan-2022 | AN-No. 1EF111
29-Jun-2021
Rohde & Schwarz showcases the new R&S CMP180 next-generation wireless device R&D and production test platformAt Mobile World Congress, Rohde & Schwarz offers an exclusive preview of the new R&S CMP180 radio communication test platform. The single-box tester features parallel testing on up to 16 devices. It fulfills cellular and non-cellular multi-signal, multi-technology requirements, making it ideal for mass production environments. In Barcelona, Rohde & Schwarz demonstrates Wi-Fi 6E/Wi-Fi 7 testing with the R&S CMP180.
24-Feb-2023
Rohde & Schwarz targets a sustainable and connected future with 5G Broadcast at MWC23Rohde & Schwarz targets a sustainable and connected future with 5G Broadcast at MWC23
23-Jun-2022
Critical infrastructures targeted by cyber criminalsIn mid-June, the Mainz municipal utility and the Darmstadt energy supplier Entega in Germany reported a cyberattack on their systems.
ARN, the largest multilingual commercial radio network in the world, has long relied on Rohde & Schwarz transmitters to reach audiences across the UAE.
13-Apr-2022
Rohde & Schwarz and Qualcomm show end-to-end live 5G Broadcast streaming to smartphones at NAB Show 2022Rohde & Schwarz and Qualcomm show end-to-end live 5G Broadcast streaming to smartphones at NAB Show 2022
30-Sep-2022
Qualcomm and Rohde & Schwarz Unveil India’s First Live End-to-End Operational 5G Broadcast System at IMC22Qualcomm and Rohde & Schwarz Unveil India’s First Live End-to-End Operational 5G Broadcast System at IMC22
04-Nov-2021
Rohde & Schwarz supports 5G research at University of Glasgow with network test equipmentEquipment for electromagnetic field research, provided by Rohde & Schwarz, will help advance the knowledge base at the University of Glasgow regarding electromagnetic fields radiating from 5G sites. Moreover, the university is using the equipment in a demonstration during COP26, the 26th UN Climate Change Conference of the Parties in Glasgow, on how 5G can contribute to carbon-neutral living.
16-Mar-2020
Rohde & Schwarz enables sub-THz ultra wideband signal analysisRohde & Schwarz is paving the way for research in the terahertz frequency range by demonstrating multi gigabit data transmission in the D-Band at 140 GHz. The setup features the R&S FSW high-end signal and spectrum analyzer equipped with an R&S FSW-B8001 option, supporting an unparalleled 8.3 GHz internal analysis bandwidth. This new hardware option will be available soon from Rohde & Schwarz.
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
The R&S®SMW200A vector signal generator is a powerful and flexible signal generation source for realistic and agile radar scenarios in highly integrated radar scenario simulators.
20-Nov-2020
This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks.
25-Nov-2016 | AN-No. 1MA263
This application note presents a solution for testing the complete radar system by generating any kind of radar echo signals.
01-Aug-2016 | AN-No. 1MA283
This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.
24-Feb-2016 | AN-No. 1GP97
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
26-Jun-2020 | AN-No. GFM343
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
Rohde & Schwarz Quick Start Guide for the R&S®SMR20, R&S®SMR27, R&S®SMR30, R&S®SMR40 Microwave Signal Generators.
Rohde & Schwarz Getting Started for the R&S®SMM100A vector signal generator, with basic information on the initial operation and the functions of the generator.
Rohde & Schwarz User Manual for the R&S®OSP-B200R / R&S®OSP-B200S2 Satellite System
Rohde & Schwarz User Manual for Ethernet Compliance Test. Describes the test procedures.
For early 6G R&D in the 110-170 GHz D-Band, R&S introduces FE170 Frontends Watch this video to get an introduction into 6G R&D in the 110-170 GHz D-Band and FE170 Frontends introduced by R&S. D band frequencies are significantly higher than the maximum frequency of any single box generators or analyzers currently available.
The R&S CMP180 radio communication tester offers two signal generators, two signal analyzers and two times eight RF ports in a single instrument making it ideal for V2X device testing in R&D and production. V2X – vehicle-to-everything communication, based on 5G NR FR1 at 5.9 GHz is the next big step for car communication.