4394 Results
09-Apr-2021
Rohde & Schwarz Introduces Scalable Distributed Multiviewer Functionality for R&S®PRISMONRohde & Schwarz claims world’s first in IP-based monitoring and multiviewer systems with R&S®PRISMON. New Scalable Distributed Multiviewer features increase system flexibility while reducing processing power required to support the network.
25-Jul-2022
Proactive IT security systems as a worthwhile investmentFor the Evil Internet Minute 2021 report, RiskIQ analyzed the scope, scale and damage of cyberattacks. The result: cybercrime costs companies $1.79 million per minute. If nothing else, the pandemic has driven the numbers up significantly.
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
01-Jul-2022
Rohde & Schwarz opens subsidiary in IsraelRohde & Schwarz opened a new office in Ra’anana, central Israel.
27-Aug-2021
WDSC boosts branding with StreamMasterStreamMaster BRAND proves plug-and-play legacy replacement
Using the Digital Baseband Interface R&S<sup>®</sup>EX-IQBox with R&S<sup>®</sup>Signal Analyzers and Agilent<sup>®</sup>ADS<sup>®</sup>Software
26-Jun-2009 | AN-No. 1MA147
Power converters with a full-bridge topology are frequently used in telecommunications and servers that need to be compact, efficient and cost sensitive, making them more complex. Switching patterns for all the main primary switches including synchronous rectifier switches need to be validated after the first protype is built. This complex validation requires proper measurement of switching patterns to prevent catastrophic switching patterns. Expertise and the right measurement tools are essential when identifying unexpected events in the converter switching process.
17-Jan-2024
TETRA, the TErrestrial Trunked RAdio, is the professional mobile radio standard (PMR) used world wide by governmental safety and security authorities and organizations, as well as by private utilities from energy suppliers through to transport.
26-Apr-2013 | AN-No. 1MA189
This application note focusses on signal measurement using the R&S®RTO digital oscilloscopes ant the output of I/Q data for processing.
18-Oct-2016 | AN-No. 1MA249
This application note provides insights into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. Including an introduction to HIL testing and realtime o
22-Jan-2021 | AN-No. 1GP124
Electronica 2024 The world's leading trade fair and conference for electronics. Electronica covers the entire world of electronics.
Cable and antenna measurement, Distance-to-fault (DTF), R&S®ZPH R&S®ZPH is the fitting tool for fast and efficient measurement tasks in the field.
ATC direction finder Find out more about ATC direction finders for situational awareness and secure call-sign identification from Rohde & Schwarz. CERTIUM LOCATE assists air traffic controllers to identify aircraft on the radar screen quickly and reliably. The system automatically recognizes aircraft, making it easier for controllers to verify the call sign ID during radio transmissions.
Power and sensitivity measurements in a shielded environment allow for detecting antenna failures in production. compact solution, mobile device production testing, TS7124 RF, shielded box, multiport, CMW100, communication, manufacturing, test set Rohde & Schwarz presented the most compact solution for mobile device production testing at the GSMA Mobile World Congress 2016 in Barcelona.
Expert Talk Oscilloscope: Bus Debugging Let your Oscilloscope decode your UART/RS232/RS485 interfaces for you! So you can quickly understand the data and correlate the data content with the electrical signal. Let your Oscilloscope decode your UART/RS232/RS485 interfaces for you! So you can quickly understand the data and correlate the data content with the electrical signal.
Frequency slective power sensor, NRQ6 Introduction to the R&S®NRQ6 frequency-selective power sensor and how to configure it for many common measurement applications.
R&S®AVQA, frequency monitor,Voice quality assurance system R&S®AVQA frequency monitor provides a great tool for analyses and alarming of irregularities.
Watch this video to learn more about powerful tools to solve UWB test challenges in R&D, for FiRa certification and in mass production The R&S CMP200 radio communication tester is the ideal instrument for all UWB device development steps. Combined in different setups, it is a powerful tool to solve UWB test challenges in R&D, for FiRa certification and in mass production.
The video shows how easy it is to perform some of the essential RF tests required for the certification of Sigfox modules and devices. The video shows how easy it is to perform some of the essential RF tests required for the certification of Sigfox modules and devices. Follow the Rohde & Schwarz ‘Let’s talk IoT’ video series which discusses hot topics from the Internet of Things.
Low power consumption is a major topic for IoT devices. The NB-IoT and LTE-M standards specify various power saving features. The video explains these features and demonstrates how you can test and optimize the power consumption of your IoT device to achieve a 10 years battery life. Optimizing IoT power consumption | Rohde & Schwarz NB-IoT/LTE-M standards specify various power saving features.
The portfolio ranges from high-quality frequency and signal analyzers to radio test systems and voice and signal transmission assurance systems for daily operations. Navigation Testing, Test & measurement for airports Rohde & Schwarz' wide portfolio of RF and digital test & measurement solutions to both set up and maintain the entire ATC communication chain.
The most important features for accurate and uncomplicated power measurements are top measurement accuracy and speed as well as simple operation on a base unit or a laptop/PC. The R&S®NRP power meter family combines all these characteristics in the R&S®NRX base unit, R&S®NRPV virtual power meter PC software and a comprehensive portfolio of LAN and USB power sensors. The R&S®NRP family is ideal for use in production, R&D and calibration labs as well as for installation and maintenance tasks.
A central MAM platform was to be at the heart of the newly established workflow while high-end Rohde & Schwarz DVS equipment was placed in strategic positions: Five R&S®VENICE ingest and production servers – providing a total of 20 channels – ensure reliable and flexible studio capture and playout.
GX470 Digital Wideband Storage Device - Product Brochure
EMI Measurement Application for Signal and Spectrum Analyzers - R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54 - Specifications
Remote Setup for 3G High Dynamic Multi Charrier Signals with SMIQ03HD and FSU / FSQ
13-Dec-2002 | AN-No. 1MA62
Rohde & Schwarz Installation Manual for the R&S®HO820 Dual Interface module.
Rohde & Schwarz Getting Started for the R&S NRP-Z Power Sensors including information on how to setup and perform basic measurements.
Rohde & Schwarz Manual for the R&S®SMZ75/90/110/170 frequency multiplier, including the models with mechanically and electronically controlled attenuator, and the software R&S®SMZ Control.
Rohde & Schwarz installation manual for the R&S®HO720 and R&S®HO730 Dual Interface modules.