1817 Results
This video demonstrates the speed, safety and privacy features of the Rohde & Schwarz Quick Personnel Security Scanner and explains the millimeter wave radio technology it uses. QPS demo video Enhanced Technology Solutions for Evolving Security Challenges
R&S QuickStep Test Executive Software - Product Brochure
R&S®TS8997 Regulatory Test System for Wireless Devices, Regulatory test systems for wireless devices to measure wideband transmission systems in 2.4 GHz and 5 GHz bands along with ETSI EN 300328 and ETSI EN 301893
R&S TS-PIO2 Analog and Digital I/O Module - Product Brochure
The R&S®ZN-Z86 and R&S®ZN-Z86X switch matrices are designed and optimized for use with the R&S®ZNA, R&S®ZNB and R&S®ZNBT vector network analyzers. They offer a comprehensive, cost-effective total solution for simple to complex measurement tasks on multiport or multiple devices.
01-Dec-2021
From the lab to the proving ground: Rohde & Schwarz and Audi cooperate on Cellular-V2X road traffic scenario testingRohde & Schwarz and Audi partner to enable Cellular-V2X (C-V2X) application testing; creating road traffic scenarios in the laboratory and using the same traffic scenarios to conduct end-to-end testing on the Audi proving ground with an R&S CMW500 wideband radio communication tester.
This application note describes in detail the steps required to make a noise figure measurement on a spectrum analyzer using the “Y Factor” technique. Background equations are presented for each step of the calculation.
25-Jul-2012 | AN-No. 1MA178
This application note is step by step guide on 5G New Radio (5G NR) signal generation and analysis capabilities using the R&S®SMW200A Vector Signal Generator.
22-Nov-2019 | AN-No. GFM322
The packet-switched architecture of LTE does not support circuit-switched voice calls as used in 2G/3G networks. The packet-switched architecture of LTE does not support circuit-switched voice calls as used in 2G/3G networks. Rollout of commercial LTE networks has been ongoing since the end of 2009 and a solution is needed to ensure fully interoperable and globally available voice services.
This application note describes how performance tests can be performed quickly and easily by using vector signal generators from Rohde & Schwarz.
04-Mar-2015 | AN-No. 1MA78
This application note shows all necessary settings for performing Dual Receiver Measurement using the R&S®EMC32-K27 option via R&S® EMC32 Measurement Software.
28-Sep-2017 | AN-No. 1SP20
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
12-Sep-2013 | AN-No. 1EF87
Simple and easy setup to perform precise pulse measurement for maintenance and troubleshooting of radar system by using R&S®Spectrum Rider FPH and with Rohde & Schwarz wideband power sensor. Simple and easy setup to perform precise pulse measurement for maintenance and troubleshooting of radar system by using R&S®Spectrum Rider FPH and with Rohde & Schwarz wideband power sensor.
Expert Talk Oscilloscope: I²C bus decoding How to identify and trace down errors in I²C interfaces using the Hardware Trigger together with History Mode. How to identify and trace down errors in I²C interfaces using the Hardware Trigger together with History Mode.
This video demonstrates the ease of radome and bumper analysis using the R&S®QAR.
MXO 4 - See the difference This video shows you how you can better place and stabilize your probes using the the Rohde & Schwarz 2D positioner for passive probes and the 3D positioner for other probes. This video shows you how you can better place and stabilize your probes using the the Rohde & Schwarz 2D positioner for passive probes and the 3D positioner for other probes.
The R&S®HA-Z24E External Preamplifier Manual describes how to set up the preamplifier, how to read out the s-parameters using the provided software, and how to insert the preampifier in a measurement setup. It also includes safety information and a performance test to check the preamplifier's performance.
Automotive OABR Ethernet is now standardized as 100BASE-T1 in the IEEE. 100BASE-T1 is currently used in most new car developments as the new automotive standard. Analyzing bus communication, by connecting the bus to an oscilloscope measuring the bus voltage levels, is what developers use in traditional networks like CAN or LIN.
This application note describes remote operation or monitoring of the R&S® RTO digital oscilloscope through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
27-Jul-2010 | AN-No. 1ER01
Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.
10-Aug-2020
Load pull is a powerful method to characterize RF power amplifiers and enablse model extraction and validation and performance, ruggedness and efficiency testing.
02-Sep-2020
Simple Network Management Protocol - Remote Controlling for Monitoring Devices
16-Mar-2007 | AN-No. 7BM65
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices.
20-Apr-2022 | AN-No. 1SL383
This application note introduces the reader to the SpaceX Hyperloop Pod Competition project and their special demands for the electrical drive train.
31-Mar-2021 | AN-No. GFM360
I perform a calibration with remote commands. With the command to start the calibration sweep with a short standard I get this error message. What is the problem?
All the user needs are the logic probes required to start using the 16 digital channels. R&S®MXO 4 SERIES OSCILLOSCOPE, oscilloscope, scope, R&S®MXO 4,digital logic channel Add 16 digital channels to the R&S®MXO 4 and use them simultaneously with all analog channels.
This video presents how to create simple pulse sequences by using repetitions and loops together with pulses with R&S®SMW200A and R&S®Pulse Sequencer software. This video presents how to create simple pulse sequences by using repetitions and loops together with pulses with R&S®SMW200A and R&S®Pulse Sequencer software.
A closer look at phase resolution and practical demonstration using cut outs is included.
R&S®NGA100 power supplies are linear, compact and easy to use. All models have excellent readback accuracy with a low-current range for demanding measurements. Features such as data logging, arbitrary waveforms, built-in statistics and remote sensing make the instruments ideal for various bench applications. Equipped with a number of different remote interfaces, including USB and Ethernet, R&S®NGA100 power supplies are great for automated testing.