419 Results
Automatic run of Rec. 11.10 testcases (remote control of MS functions)
07-Mar-2002 | AN-No. 1CMAN30E
09-Jun-2022
Rohde & Schwarz highlights its future-oriented ADAS test solutions at Automotive Testing Expo Europe 2022At Automotive Testing Expo Europe 2022 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of advanced test solutions that support automotive applications. In the focus of the company at the show will be C-V2X, GNSS and automotive radar solutions which pave the way for the realization of advanced driver assistance systems (ADAS). Another important topics are connectivity test solutions for Automotive Ethernet, 5G and UWB.
02-Dec-2021
Signal source analyzer from Rohde & Schwarz in operation at laboratories of US Air ForceAFMETCAL, the Air Force Metrology and Calibration Authority, has ordered signal source analyzers (SSA) from Rohde & Schwarz. They will be operated in AFMETCAL’s precision measurement equipment laboratories (PMEL’s) and Air Force primary standards laboratory (AFPSL). The signal source analyzers are used for calibration of phase noise analog (AM, FM & PM) and digital modulation measurements. For phase noise measurement Rohde & Schwarz has also provided cross-correlation offering very high sensitivity, flexibility and fast measurement speed — all in one box.
27-Feb-2023
Rohde & Schwarz verifies NTN capabilities of Bullitt’s smartphone, powered by MediaTek 3GPP Rel.17 chipsetRohde & Schwarz has partnered with Bullitt and MediaTek to fully test and verify the world’s first satellite-to-mobile messaging 5G smartphone in line with 3GPP Release 17. The groundbreaking test solution from Rohde & Schwarz verifies that SOS messaging and two-way messaging work reliably in no-coverage scenarios via non-terrestrial networks (NTN) in line with 3GPP. At MWC Barcelona, a test setup is showcased at the Rohde & Schwarz booth featuring a rugged 5G smartphone from Bullitt with integrated MediaTek 3GPP NTN Rel.17 chipset as DUT.
UWB test equipment, ultra-wideband tester Watch our video and discover how an OTA test setup featuring the R&S®CMP200 allows performing all cases important for UWB testing.
18-Jan-2021
Rohde & Schwarz to provide first IMS test cases for 5G NR protocol conformance validated by PTCRBWith the PTCRB validating the Rohde & Schwarz IMS test cases for 5G NR, the company’s success story of IMS protocol conformance continues.
21-Feb-2024
Skylo achieves successful phase 1 validation of NTN test plan with Rohde & SchwarzRohde & Schwarz has reached a major milestone: its NTN Netop test solutions have been accepted as part of Skylo’s NTN Certification Program.
The R&S®RadEsT automotive radar essential tester is provides OEMS and Tier 1s with dynamic and precise target generation for debugging of reference designs and software.
18-Oct-2021
Rohde & Schwarz validates 10 Gbps end-to-end (E2E) peak downlink IP data throughputRohde & Schwarz announced today the next breakthrough in 5G data performance: With support of Qualcomm Technologies, Inc., Rohde & Schwarz has validated 10 Gbps end-to-end (E2E) IP data performance using its R&S CMX500 5G radio communication tester platform. The setup was powered by Snapdragon® X65 5G Modem-RF System, the world’s first 3GPP Release 16 modem-RF system with Qualcomm® QTM545 mmWave Antenna Module.
17-Aug-2020
Continental Resources offers high volume 5G mobile device testing with Rohde & Schwarz equipmentContintental Resources offers high volume 5G mobile device testing with Rohde & Schwarz equipment. Uniting the worlds of 4G and 5G, the R&S CMX500 radio communication tester delivers a smooth upgrade path from LTE to 5G NR device testing.
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
23-Mar-2021
GCF validates IMS test cases from Rohde & Schwarz for 5G NR protocol conformanceIn cooperation with MediaTek, Rohde & Schwarz has submitted test cases for 5G NR protocol conformance test to the Global Certification Forum (GCF). The test cases have been validated successfully, adding on to the company’s legacy in IP Multimedia Subsystem (IMS) protocol conformance testing.
EN-DC Mode According to 3GPP 38.521-3
This application note aims to guide through the 5G NR Frequency Range 1 (FR1) NSA RF UE conformance test according to 3GPP38.521-3 based on mobile radio tester R&S®CMX.
25-Jun-2021 | AN-No. 1SL368
CMW500_Overview
Demonstration of BER Test with SMIQ or AMIQ and FSP or FSU
06-May-2002 | AN-No. 1MA57
To create a consolidated solution, the entire data servers and tools were moved into the tester, offering a unique integrated solution for application testing. All tests and measurements can be carried out manually in the graphical user interface R&S®CMsquares, they can be built as test sequences in the integrated Sequencer tool or remotely controlled via XLAPI and SCPI interfaces.
Non-standalone and standalone signaling tests in both FR1 and FR2 frequency range For developers of 5G devices, Rohde & Schwarz features the R&S®CMX500 radio communication tester that enables non-standalone (NSA) and standalone (SA) signaling tests in both FR1 and FR2 frequency ranges.
CMW500_Overview
Models: R&S®FSWP8, R&S®FSWP26, R&S®FSWP50
Models: R&S®QAR50 vertical polarization, R&S®QAR50 horizontal polarization, R&S®QAR50-R
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109