4374 Results
Video, 5G SMA100B, High-resolution digital-to-analog converters (DACs) and analog-to-digital converters (ADCs) such as the recently launched ADC12DJ3200 from Texas Instruments are particularly required for 5G mobile communication applications.
This flexible test solutions helps to save time and cost for the rollout of cellular V2X. MWC2020, CMW500, SMBV100B, CANoe, C-V2x, V2X, Dyna4, C-V2X testing, SAVARI, VECTOR Follow this video series on our latest T&M innvoations for 5G devices, base stations and 5G mobile networks, V2X many more toics.
To enable the industry to study wider bandwidths at higher frequencies, Rohde & Schwarz implemented a unique 2 GHz modulation bandwidth in the R&S®SMW200A vector signal generator enabling 5G signal evaluation up to 40 GHz carrier frequency. Enhanced mobile broadband is a major topic in the ongoing 5G discussions, with peak data rates in the Gbit/s range and average user data rates of 100 Mbit/s. To
27-Jan-2021
Rohde & Schwarz supports Egyptian National Media Authority in major DVB-T2 transmission network expansionR&S®TMU9evo DVB-T2 transmitters form the backbone of an ambitious Egyptian upgrade project serving many millions of consumers in Africa’s third largest country.
18-Sep-2020
Düsseldorf university clinic compromised by cyber criminalsAccording to the BSI report "The State of IT Security in Germany 2019", the number of reported IT security incidents in the KRITIS Health Sector was in third place with 47 reported IT security incidents in the reporting period.
18-Oct-2021
Rohde & Schwarz validates 10 Gbps end-to-end (E2E) peak downlink IP data throughputRohde & Schwarz announced today the next breakthrough in 5G data performance: With support of Qualcomm Technologies, Inc., Rohde & Schwarz has validated 10 Gbps end-to-end (E2E) IP data performance using its R&S CMX500 5G radio communication tester platform. The setup was powered by Snapdragon® X65 5G Modem-RF System, the world’s first 3GPP Release 16 modem-RF system with Qualcomm® QTM545 mmWave Antenna Module.
Migration to Visual Studio .NET 2005 of proprietary Test Cases
28-Nov-2007 | AN-No. 1CM63
CDMA2000® 1xRTT / 1xEV-DO Measurement of time relationship between CDMA RF signal and PP2S clock
09-Nov-2007 | AN-No. 1CM33
Measuring Electro Magnetic Disturbance During ISO/IEC 14443 Chipcard Data Transmission
19-Oct-2007 | AN-No. 1MA120
CDMA2000<sup>®</sup> 1xEV-DO Packet Data Testing with R&S<sup>®</sup> CMU200
04-May-2007 | AN-No. 1CM64
This application note describes how to characterize RMS jitter with the R&S FSUP signal source analyzer. The instrument can distinguish random jitter and periodic jitter easily and measure all parameters of interest.
05-Apr-2011 | AN-No. 1EF71
Synchronous Node B Testing with R&S CMU300
10-Nov-2005 | AN-No. 1CM58
TD-SCDMA Test Signals in Accordance with Standards TS 34.122 and TS 25.142
10-May-2007 | AN-No. 1MA104
Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.
10-Aug-2020
WiMAX: IEEE 802.16e-2005 Introduction to OFDMA Measurements
23-May-2007 | AN-No. 1EF58
31-May-2022
R&S ARDRONIS reliably detects drone signals in densely occupied scenariosThe R&S ARDRONIS counter drone solution and the new R&S ADD557SR direction finding and monitoring antenna from Rohde & Schwarz can detect commercial drone activity across complete frequency range.
Accurate multitechnology RF measurements for deep network insights
Rohde & Schwarz User Manual for the R&S NRPxxS/SN Power Sensors including information on how to setup and perform basic measurements and remote command description.
R&S RTO/R&S RTP USB 2.0/3.2 Compliance Test User Manual. The user manual describes the USB 2.0 compliance test procedures.
This poses a challenge for transceiver components such as filters, mixers and amplifiers. To design these components and later integrate them into an mm-wave transceiver, adequate test and measurement solutions are essential. This webinar discusses the associated test and measurement aspects and challenges that have been identified, and demonstrates initial measurement solutions.
In July 2016, Verizon Wireless and its partners published a 5G technology standard based on 3GPP's Release 12 specification for LTE. Known as 5GTF, the specification targets Fixed Wireless Access (FWA) as application scenario with no mobility. In July 2016, Verizon Wireless and its partners published a 5G technology standard based on 3GPP's Release 12 specification for LTE.
Infotainment Quality of Service is a competitive differentiator for vehicle manufacturers. However, the delivery of digital services to vehicles relies on robust wireless connectivity, and a critical element in the communication chain are the vehicle antennas.
Reliable small cell planning using LTE test transmitter
09-Feb-2017 | AN-No. 1MA297
Measurement of Adjacent Channel Leakage Power on 3GPP W-CDMA Signals with the FSP
12-Jan-2001 | AN-No. 1EF41
Using R&S®CMU200 Drivers in Microsoft Visual Studio 2008 with Visual Basic .NET and C#
30-Jun-2009 | AN-No. 1MA157
Advanced Signal Analysis using the History Mode of the R&S RTO Oscilloscope.
03-Jun-2013 | AN-No. 1TD02
This application note describes how noise figure and gain of amplifiers or converters in the microwave range from 50 GHz to 67 GHz are measured.
12-May-2009 | AN-No. 1EF64
Creating MediaFLO™ Test Scenarios in Accordance with the Minimum Performance Specification (MPS) V 1.2
31-Aug-2006 | AN-No. 7BM62
Transfering Files from a UPL Audio Analyzer to an external PC via the RS-232-C Interface
15-Nov-2001 | AN-No. 1GA42
Controlling External Generators and Power Meters with Network Analyzer ZVR
19-Oct-1998 | AN-No. 1EZ46