1106 Results
The user captures longer acquisition sequences even at high sampling rates for more analysis results, e.g. when analyzing transients of switched-mode power supplies. Video, RTM3000, Oscilloscope, Memory Preview The R&S®RTM3000 offers a class-leading memory depth:40 Msample per channel are available, even 80 Msample in interleaved mode.
The R&S®ZNL vector network analyzer offers a wide frequency range from 5 kHz to 3 or 6 GHz, an output power from –40 dBm all the way up to 0 dBm, and a wide dynamic range of typically up to 130 dB. If you don’t need such a high dynamic range, simply increase the IF bandwidth to speed up your measurements instead.
R&S®PWC200 Plane Wave Converter - Product Brochure
Noise Power Ratio Measurements | Rohde & Schwarz With the R&S®SMW200A and the R&S®FSW realistic NPR measurements can be performed by using modulated signals. Increase the performance of your amplifier.
Electronic desgin, Power integritiy, DC/DC converter test, EMI Debugging Watch this wrap up of the Electronic Design and Test Day 2020 at Rohde & Schwarz Munich.
From direct RF measurements at 14 GHz to characterizing a D band power amplifier module at 144 GHz , this is how our gamechanger, the R&S®SFI100A vector signal generator delivers on wideband modulated measurements.
The Signal Generator provides purest output signals while maintaining the highest output power level together with low harmonics. On top of all it provides great usability and top ergonomic comfort. The R&S SMA100B is now available with up to 67 GHz frequency range.
The metaverse and XR - Part 3 Metaverse and XR applications demand a delicate balance between network reliability, latency, power efficiency and capacity. This requirement has also been addressed by 3GPP across multiple 5G releases.
The R&S®ZNL combines network analysis, spectrum analysis and power measurement in one instrument. R&S®ZNL, ZNL, vector network analyzer, This video introduces the R&S®ZNL vector network analyzer and demonstrates how easy it is to set up a basic network analysis measurement and how to store this setup for recall at a later time.
Conducted emissions are electromagnetic disturbances caused by a device and conducted out by interconnects such as the power supply lines. Devices are required to pass stringent limits on the level of such emissions and these tests require expensive testing time at compliance laboratories.
18-Jul-2023
Rohde & Schwarz demonstrates high reliability and innovative technology at IBC2023Rohde & Schwarz demonstrates high reliability and innovation power - Enabling new broadcast business models and continuous development in media solutions deliver substantial customer value
29-Apr-2021
China’s mobile network operators select test scanners from Rohde & Schwarz for 5G network optimizationChina Mobile, China Telecom and China Unicom have selected the R&S TSME6 drive test scanner from Rohde & Schwarz for their 5G network deployment and optimization efforts. Rohde & Schwarz China and Zhuhai DingLi Corp., Ltd. have jointly won the three tenders for each operator’s centralized procurement projects over the past months, thanks to the scanner’s superior performance.
23-Feb-2022
Rohde & Schwarz has won China Mobile's 2021 5G frequency scanner procurement projectRohde & Schwarz China and Zhuhai DingLi Corp., Ltd. have won the 2021 China Mobile centralized procurement project for 5G scanners. The R&S TSME6 drive test scanner has an ultracompact design and multiband, multitechnology support for simultaneous measurements. It scored a 70 % share of the project. This is the third consecutive China Mobile tender awarded to frequency scanners from Rohde & Schwarz. The R&S TSME6 has industry-leading features and performance, making it a reliable measurement intrument for the China Mobile 5G network deployment and optimization in the field.
04-Nov-2021
Rohde & Schwarz supports 5G research at University of Glasgow with network test equipmentEquipment for electromagnetic field research, provided by Rohde & Schwarz, will help advance the knowledge base at the University of Glasgow regarding electromagnetic fields radiating from 5G sites. Moreover, the university is using the equipment in a demonstration during COP26, the 26th UN Climate Change Conference of the Parties in Glasgow, on how 5G can contribute to carbon-neutral living.
Noise figure is an important parameter that describes the noise contribution of an electronic device. A classical approach to measure the noise figure is to use a noise source which delivers two different input noise powers by switching between a “hot” and a “cold” state and a noise receiver
23-Dec-2021 | AN-No. 1SL378
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
Comprehensive test solutions guide for production and R&D
Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.
19-Jun-2023 | AN-No. 1SL395
This application note demonstrates the use of the FSMR, including the Cross-correlation option (R&S®FSMR3-B60), to measure the Phase Noise characteristics of a raw Signal Generator (R&®SMA100B).
31-Dec-2021 | AN-No. 1SL376
01-Jul-2021
New R&S RTO6 oscilloscopes from Rohde & Schwarz deliver instant insights thanks to enhanced usability and performanceRohde & Schwarz takes its successful R&S RTO family to the next level with the all-new and redesigned R&S RTO6 oscilloscope. Featuring an updated user interface on a larger, 15.6-inch Full HD touchscreen and straightforward workflows, it speeds up daily measurement tasks. The R&S RTO6 delivers deep insights into designs on the engineer's workbench with state-of-the-art specifications such as an outstanding 9.4 ENOB, an unparalleled update rate of one million waveforms per second as well as a comprehensive toolset of analysis functions.
This example demonstrates the power of Advanced Eye analysis with the RTP oscilloscope on an Automotive Ethernet PAM4 signal at 5 Gbaud. PAM-N Analysis with the R&S RTP Oscilloscope (Part 3) Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes together with the Advanced Eye option to characterize and verify signal transitions.
The video also provides insights on the peak-to-average power ratio (PAPR, crest factor) of test model signals and on specific allocation aspects such as in terms of synchronization signal blocks (SSB). 5G NR test model (TM) support for FR1 and FR2 | R&S 5G NR test models for FR1 and FR2 support RF conformance testing of 5G base stations.
This results in a varying peak-to-average power ratio (PAPR) depending on the used payload data which are typically pseudo noise (PN) sequences. In this video we describe how to generate a scrambled bit sequence using the LTE standard. The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates.
03-May-2024
Rohde & Schwarz presents cutting edge solutions at DSA 2024Rohde & Schwarz presents turnkey solutions that enable true independence and digital sovereignty at DSA 2024 in Kuala Lumpur.
This enables researchers to compare waveform candidates with each other and their own proposals, perform hardware in-the-loop experiments such as analyzing the impact of non-linear devices (e.g. power amplifier) to the signal characteristics and optimize RF front-end designs.
RedCap targets at IoT services requiring higher data rate as mMTC services but less data rates as 5G eMBB with the simultaneous reduction of UE complexity and leveraging power saving aspects. Typical examples are stationary devices such as cameras and industrial sensors in private 5G networks.
This is why IQM acquires test equipment such as power supplies, oscilloscopes and signal and spectrum analyzers from Rohde & Schwarz Finland. Our Finnish subsidiary maintains a close connection with IQM as well as a direct access to our development team at company headquarters in Munich. These close connections ensure cutting-edge test and measurement solutions and precise calibration services.
Combined with the R&S®FSW signal and spectrum analyzer supporting an internal 1.2 GHz analysis bandwidth makes this setup ideal for in-depth component characterization such as for 28 GHz power amplifier development.
13-Sep-2021
Bluetest adds option to integrate R&S CMX500 5G radio communication tester into its RTS reverberation test systemsUsers of Bluetest reverberation test systems (RTS) can now enjoy the benefits of the R&S CMX500 5G NR radio communication tester from Rohde & Schwarz for 5G FR1 MIMO over-the-air (OTA) measurements. With the R&S CMX500 integrated in the Bluetest Flow control software, the solution provides a stable and reliable environment for measuring throughput as well as receiver sensitivity and output power on multicarrier devices with up to 4x4 MIMO.
19-Feb-2024
Rohde & Schwarz brings aerospace solutions that improve safety and efficiency in all domains to Singapore Airshow 2024Rohde & Schwarz, a leading provider of cutting-edge secure communications solutions, is excited to announce its participation in the upcoming Singapore Airshow, which will take place from February 20 to 25. As South East Asia's premier aerospace and defense event, the exhibition serves as a platform to showcase the current and future Rohde & Schwarz portfolio of trusted communications solutions.
The LTE C-V2X Scanner provides customers an opportunity to verify, test, and optimize ITS traffic systems (RF KPIs and decoded ITS message content).
21-Oct-2022 | AN-No. 8NT07